In Silico Detection and Typing of Plasmids using PlasmidFinder and Plasmid Multilocus Sequence Typing
01 Jul 2014-Antimicrobial Agents and Chemotherapy (American Society for Microbiology)-Vol. 58, Iss: 7, pp 3895-3903
TL;DR: Two easy-to-use Web tools for in silico detection and characterization of whole-genome sequence (WGS) and whole-plasmid sequence data from members of the family Enterobacteriaceae are designed and developed.
Abstract: In the work presented here, we designed and developed two easy-to-use Web tools for in silico detection and characterization of whole-genome sequence (WGS) and whole-plasmid sequence data from members of the family Enterobacteriaceae. These tools will facilitate bacterial typing based on draft genomes of multidrug-resistant Enterobacteriaceae species by the rapid detection of known plasmid types. Replicon sequences from 559 fully sequenced plasmids associated with the family Enterobacteriaceae in the NCBI nucleotide database were collected to build a consensus database for integration into a Web tool called PlasmidFinder that can be used for replicon sequence analysis of raw, contig group, or completely assembled and closed plasmid sequencing data. The PlasmidFinder database currently consists of 116 replicon sequences that match with at least at 80% nucleotide identity all replicon sequences identified in the 559 fully sequenced plasmids. For plasmid multilocus sequence typing (pMLST) analysis, a database that is updated weekly was generated from www.pubmlst.org and integrated into a Web tool called pMLST. Both databases were evaluated using draft genomes from a collection of Salmonella enterica serovar Typhimurium isolates. PlasmidFinder identified a total of 103 replicons and between zero and five different plasmid replicons within each of 49 S . Typhimurium draft genomes tested. The pMLST Web tool was able to subtype genomic sequencing data of plasmids, revealing both known plasmid sequence types (STs) and new alleles and ST variants. In conclusion, testing of the two Web tools using both fully assembled plasmid sequences and WGS-generated draft genomes showed them to be able to detect a broad variety of plasmids that are often associated with antimicrobial resistance in clinically relevant bacterial pathogens.
Citations
More filters
TL;DR: Virulence and antibiotic resistance traits in the strains isolated from ready-to-eat (RTE) foods indicate a potential public health risk for consumers.
Abstract: Listeria monocytogenes is causing listeriosis, a rare but severe foodborne infection. Listeriosis affects pregnant women, newborns, older adults, and immunocompromised individuals. Ready-to-eat (RTE) foods are the most common sources of transmission of the pathogen This study explored the virulence factors and antibiotic resistance in L. monocytogenes strains isolated from ready-to-eat (RTE) foods through in vitro and in silico testing by whole-genome sequencing (WGS). The overall positivity of L. monocytogenes in RTE food samples was 3.1% and 14 strains were isolated. L. monocytogenes ST8, ST2763, ST1, ST3, ST5, ST7, ST9, ST14, ST193, and ST451 sequence types were identified by average nucleotide identity, ribosomal multilocus sequence typing (rMLST), and core genome MLST. Seven isolates had serotype 1/2a, five 1/2b, one 4b, and one 1/2c. Three strains exhibited in vitro resistance to ampicillin and 100% of the strains carried the fosX, lin, norB, mprF, tetA, and tetC resistance genes. In addition, the arsBC, bcrBC, and clpL genes were detected, which conferred resistance to stress and disinfectants. All strains harbored hlyA, prfA, and inlA genes almost thirty-two the showed the bsh, clpCEP, hly, hpt, iap/cwhA, inlA, inlB, ipeA, lspA, mpl, plcA, pclB, oat, pdgA, and prfA genes. One isolate exhibited a type 11 premature stop codon (PMSC) in the inlA gene and another isolate a new mutation (deletion of A in position 819). The Inc18(rep25), Inc18(rep26), and N1011A plasmids and MGEs were found in nine isolates. Ten isolates showed CAS-Type II-B systems; in addition, Anti-CRISPR AcrIIA1 and AcrIIA3 phage-associated systems were detected in three genomes. These virulence and antibiotic resistance traits in the strains isolated in the RTE foods indicate a potential public health risk for consumers.
10 citations
TL;DR: As part of an on-going attempt to identify and characterize the newly discovered female urinary microbiota, the genome sequences and annotation of two urinary isolates of E. coli are reported, one of which was isolated from a female patient who self-reported cystitis and the other from a patient who reported that she did not have symptoms of Cystitis.
Abstract: The genus Escherichia includes pathogens and commensals. Bladder infections (cystitis) result most often from colonization of the bladder by uropathogenic E. coli strains. In contrast, a poorly defined condition called asymptomatic bacteriuria results from colonization of the bladder with E. coli strains without symptoms. As part of an on-going attempt to identify and characterize the newly discovered female urinary microbiota, we report the genome sequences and annotation of two urinary isolates of E. coli: one (E78) was isolated from a female patient who self-reported cystitis; the other (E75) was isolated from a female patient who reported that she did not have symptoms of cystitis. Whereas strain E75 is most closely related to an avian extraintestinal pathogen, strain E78 is a member of a clade that includes extraintestinal strains often found in the human bladder. Both genomes are uncommonly rich in prophages.
10 citations
Cites methods from "In Silico Detection and Typing of P..."
...While PlasmidFinder recognized pE78....
[...]
...All 62 E78 contigs were also assessed for putative plasmid sequences using PlasmidFinder [20]....
[...]
TL;DR: The draft genome sequence of Alcaligenes faecalis strain IITR89, a bacterium able to form indigo by utilizing indole as the sole carbon source, is reported.
Abstract: We report the draft genome sequence of Alcaligenes faecalis strain IITR89, a bacterium able to form indigo by utilizing indole as the sole carbon source. The Alcaligenes species is increasingly reported for biodegradation of diverse toxicants and thus complete sequencing may provide insight into biodegradation capabilities and other phenotypes.
10 citations
30 Oct 2019
TL;DR: The presence of plasmid-borne blaIMP-68 is notable, because it conferred antimicrobial resistance to carbapenems, except for imipenem, on Enterobacteriaceae and will likely affect treatment plans using antibacterial agents in clinical settings.
Abstract: We recently detected a novel variant of an IMP-type metallo-β-lactamase gene (blaIMP-68) from meropenem-resistant but imipenem-susceptible Klebsiella pneumoniae TA6363 isolated in Tokyo, Japan. blaIMP-68 encodes a Ser262Gly point mutant of IMP-11, and transformation experiments showed that blaIMP-68 increased the MIC of carbapenems in recipient strains, whereas the MIC of imipenem was not greatly increased relative to that of other carbapenems, including meropenem. Kinetics experiments showed that IMP-68 imipenem-hydrolyzing activity was lower than that for other carbapenems, suggesting that the antimicrobial susceptibility profile of TA6363 originated from IMP-68 substrate specificity. Whole-genome sequencing showed that blaIMP-68 is harbored by the class 1 integron located on the IncL/M plasmid pTMTA63632 (88,953 bp), which was transferable via conjugation. The presence of plasmid-borne blaIMP-68 is notable, because it conferred antimicrobial resistance to carbapenems, except for imipenem, on Enterobacteriaceae and will likely affect treatment plans using antibacterial agents in clinical settings. IMPORTANCE IMP-type metallo-β-lactamases comprise one group of the “Big 5” carbapenemases. Here, a novel blaIMP-68 gene encoding IMP-68 (harboring a Ser262Gly point mutant of IMP-11) was discovered from meropenem-resistant but imipenem-susceptible Klebsiella pneumoniae TA6363. The Ser262Gly substitution was previously identified as important for substrate specificity according to a study of other IMP variants, including IMP-6. We confirmed that IMP-68 exhibited weaker imipenem-hydrolyzing activity than that for other carbapenems, demonstrating that the antimicrobial susceptibility profile of TA6363 originated from IMP-68 substrate specificity, with this likely to affect treatment strategies using antibacterial agents in clinical settings. Notably, the carbapenem resistance conferred by IMP-68 was undetectable based on the MIC of imipenem as a carbapenem representative, which demonstrates a comparable antimicrobial susceptibility profile to IMP-6-producing Enterobacteriaceae that previously spread in Japan due to lack of awareness of its existence.
10 citations
TL;DR: In conclusion, bean sprouts frequently harbor ESBL-E, which is a potential source for consumers, and isolates from samples closely matched in time were frequently clonally related, indicative of batch contamination.
Abstract: Community-acquired carriage and infections due to extended-spectrum beta-lactamase producing Enterobacteriaceae (ESBL-E) are increasing worldwide, resulting in increased morbidity, mortality and healthcare costs The origins of community-acquired ESBL-E carriage and infections remain unclear Bean sprouts are a potential source of Enterobacteriaceae for the community, as illustrated by outbreaks of pathogenic Enterobacteriaceae in the past The current study focuses on contamination of retail bean sprouts with ESBL-E in the Netherlands Of 131 bean sprout samples purchased between 2013 and 2016, 25 (19%) were contaminated with ESBL-E The detected isolates were almost exclusively Klebsiella spp and co-resistance to other antibiotics was observed frequently Over time there was substantial genetic diversity between isolates On the other hand, isolates from samples closely matched in time were frequently clonally related, indicative of batch contamination Remarkably, no Escherichia coli was found In conclusion, bean sprouts frequently harbor ESBL-E, which is a potential source for consumers
10 citations
References
More filters
TL;DR: A web server providing a convenient way of identifying acquired antimicrobial resistance genes in completely sequenced isolates was created, and the method was evaluated on WGS chromosomes and plasmids of 30 isolates.
Abstract: Objectives
Identification of antimicrobial resistance genes is important for understanding the underlying mechanisms and the epidemiology of antimicrobial resistance. As the costs of whole-genome sequencing (WGS) continue to decline, it becomes increasingly available in routine diagnostic laboratories and is anticipated to substitute traditional methods for resistance gene identification. Thus, the current challenge is to extract the relevant information from the large amount of generated data.
3,956 citations
"In Silico Detection and Typing of P..." refers methods in this paper
...To extract the relevant information from the large amount of data generated, a Web-based tool, ResFinder, for the identification of acquired or intrinsically present antimicrobial resistance genes in whole-genome data was recently developed (15)....
[...]
TL;DR: NCBI’s Conserved Domain Database (CDD) is a resource for the annotation of protein sequences with the location of conserved domain footprints, and functional sites inferred from these footprints.
Abstract: NCBI's Conserved Domain Database (CDD) is a resource for the annotation of protein sequences with the location of conserved domain footprints, and functional sites inferred from these footprints. CDD includes manually curated domain models that make use of protein 3D structure to refine domain models and provide insights into sequence/structure/function relationships. Manually curated models are organized hierarchically if they describe domain families that are clearly related by common descent. As CDD also imports domain family models from a variety of external sources, it is a partially redundant collection. To simplify protein annotation, redundant models and models describing homologous families are clustered into superfamilies. By default, domain footprints are annotated with the corresponding superfamily designation, on top of which specific annotation may indicate high-confidence assignment of family membership. Pre-computed domain annotation is available for proteins in the Entrez/Protein dataset, and a novel interface, Batch CD-Search, allows the computation and download of annotation for large sets of protein queries. CDD can be accessed via http://www.ncbi.nlm.nih.gov/Structure/cdd/cdd.shtml.
2,934 citations
"In Silico Detection and Typing of P..." refers background in this paper
...In particular, the replicase proteins showing the pfam02387 or pfam01051 conserved domains were assigned to the FII and FIB groups, respectively (31)....
[...]
TL;DR: Results indicated that the inc/rep PCR method demonstrates high specificity and sensitivity in detecting replicons on reference plasmids and also revealed the presence of recurrent and common plasmid in epidemiologically unrelated Salmonella isolates of different serotypes.
2,163 citations
"In Silico Detection and Typing of P..." refers methods in this paper
...A collection of 24 previously characterized and fully FIG 1 Numbers of fully sequenced plasmids (y axis) classified into incompatibility groups occurring in the different bacterial species of the Enterobacteriaceae family....
[...]
...Since 2005, a PCR-based replicon typing (PBRT) scheme has been available that targets in multiplex PCRs the replicons of the major plasmid families occurring in members of the family Enterobacteriaceae (2)....
[...]
...Here, we present two free, easy-to-use Web tools, PlasmidFinder and pMLST, to analyze and classify plasmids from bacterial species of the family Enterobacteriaceae....
[...]
...Here, we describe the design of two new easy-to-use Web tools useful for the rapid identification of plasmids in Enterobacteriaceae species that are of interest for epidemiological and clinical microbiology investigations of the plasmid-associated spread of antimicrobial resistance....
[...]
...This method was initially developed to detect the replicons of plasmids belonging to the 18 major incompatibility (Inc) groups of Enterobacteriaceae species (3)....
[...]
TL;DR: The Bacterial Isolate Genome Sequence Database (BIGSDB) represents a freely available resource that will assist the broader community in the elucidation of the structure and function of bacteria by means of a population genomics approach.
Abstract: The opportunities for bacterial population genomics that are being realised by the application of parallel nucleotide sequencing require novel bioinformatics platforms These must be capable of the storage, retrieval, and analysis of linked phenotypic and genotypic information in an accessible, scalable and computationally efficient manner The Bacterial Isolate Genome Sequence Database (BIGSDB) is a scalable, open source, web-accessible database system that meets these needs, enabling phenotype and sequence data, which can range from a single sequence read to whole genome data, to be efficiently linked for a limitless number of bacterial specimens The system builds on the widely used mlstdbNet software, developed for the storage and distribution of multilocus sequence typing (MLST) data, and incorporates the capacity to define and identify any number of loci and genetic variants at those loci within the stored nucleotide sequences These loci can be further organised into 'schemes' for isolate characterisation or for evolutionary or functional analyses Isolates and loci can be indexed by multiple names and any number of alternative schemes can be accommodated, enabling cross-referencing of different studies and approaches LIMS functionality of the software enables linkage to and organisation of laboratory samples The data are easily linked to external databases and fine-grained authentication of access permits multiple users to participate in community annotation by setting up or contributing to different schemes within the database Some of the applications of BIGSDB are illustrated with the genera Neisseria and Streptococcus The BIGSDB source code and documentation are available at http://pubmlstorg/software/database/bigsdb/
Genomic data can be used to characterise bacterial isolates in many different ways but it can also be efficiently exploited for evolutionary or functional studies BIGSDB represents a freely available resource that will assist the broader community in the elucidation of the structure and function of bacteria by means of a population genomics approach
1,943 citations
TL;DR: A Web-based method for MLST of 66 bacterial species based on whole-genome sequencing data that enables investigators to determine the sequence types of their isolates on the basis of WGS data.
Abstract: Accurate strain identification is essential for anyone working with bacteria. For many species, multilocus sequence typing (MLST) is considered the “gold standard” of typing, but it is traditionally performed in an expensive and time-consuming manner. As the costs of whole-genome sequencing (WGS) continue to decline, it becomes increasingly available to scientists and routine diagnostic laboratories. Currently, the cost is below that of traditional MLST. The new challenges will be how to extract the relevant information from the large amount of data so as to allow for comparison over time and between laboratories. Ideally, this information should also allow for comparison to historical data. We developed a Web-based method for MLST of 66 bacterial species based on WGS data. As input, the method uses short sequence reads from four sequencing platforms or preassembled genomes. Updates from the MLST databases are downloaded monthly, and the best-matching MLST alleles of the specified MLST scheme are found using a BLAST-based ranking method. The sequence type is then determined by the combination of alleles identified. The method was tested on preassembled genomes from 336 isolates covering 56 MLST schemes, on short sequence reads from 387 isolates covering 10 schemes, and on a small test set of short sequence reads from 29 isolates for which the sequence type had been determined by traditional methods. The method presented here enables investigators to determine the sequence types of their isolates on the basis of WGS data. This method is publicly available at www.cbs.dtu.dk/services/MLST.
1,620 citations
"In Silico Detection and Typing of P..." refers methods in this paper
...If raw sequence reads are uploaded, they are first assembled (after the sequencing platform is given by the user) as described previously (16)....
[...]