scispace - formally typeset
Search or ask a question
Journal ArticleDOI

In Silico Detection and Typing of Plasmids using PlasmidFinder and Plasmid Multilocus Sequence Typing

TL;DR: Two easy-to-use Web tools for in silico detection and characterization of whole-genome sequence (WGS) and whole-plasmid sequence data from members of the family Enterobacteriaceae are designed and developed.
Abstract: In the work presented here, we designed and developed two easy-to-use Web tools for in silico detection and characterization of whole-genome sequence (WGS) and whole-plasmid sequence data from members of the family Enterobacteriaceae. These tools will facilitate bacterial typing based on draft genomes of multidrug-resistant Enterobacteriaceae species by the rapid detection of known plasmid types. Replicon sequences from 559 fully sequenced plasmids associated with the family Enterobacteriaceae in the NCBI nucleotide database were collected to build a consensus database for integration into a Web tool called PlasmidFinder that can be used for replicon sequence analysis of raw, contig group, or completely assembled and closed plasmid sequencing data. The PlasmidFinder database currently consists of 116 replicon sequences that match with at least at 80% nucleotide identity all replicon sequences identified in the 559 fully sequenced plasmids. For plasmid multilocus sequence typing (pMLST) analysis, a database that is updated weekly was generated from www.pubmlst.org and integrated into a Web tool called pMLST. Both databases were evaluated using draft genomes from a collection of Salmonella enterica serovar Typhimurium isolates. PlasmidFinder identified a total of 103 replicons and between zero and five different plasmid replicons within each of 49 S . Typhimurium draft genomes tested. The pMLST Web tool was able to subtype genomic sequencing data of plasmids, revealing both known plasmid sequence types (STs) and new alleles and ST variants. In conclusion, testing of the two Web tools using both fully assembled plasmid sequences and WGS-generated draft genomes showed them to be able to detect a broad variety of plasmids that are often associated with antimicrobial resistance in clinically relevant bacterial pathogens.

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI
TL;DR: A collection of phylogroup F strains recovered in Australia from faeces and extra-intestinal sites from humans, companion animals and native animals, as well as from poultry meat and water samples find resistance to fluoroquinolones and/or expanded-spectrum cephalosporins was common.
Abstract: Unlike Escherichia coli strains belonging to phylogroup B2, the clinical significance of strains belonging to phylogroup F is not well understood. Here we report on a collection of phylogroup F strains recovered in Australia from faeces and extra-intestinal sites from humans, companion animals and native animals, as well as from poultry meat and water samples. The distribution of sequence types was clearly non-random with respect to isolate source. The antimicrobial resistance and virulence trait profiles also varied with the sequence type of the isolate. Phylogroup F strains tended to lack the virulence traits typically associated with phylogroup B2 strains responsible for extra-intestinal infection in humans. Resistance to fluoroquinolones and/or expanded-spectrum cephalosporins was common within ST648, ST354 and ST3711. Although ST354 and ST3711 are part of the same clonal complex, the ST3711 isolates were only recovered from native birds being cared for in a single wildlife rehabilitation centre, whereas the ST354 isolates were from faeces and extra-intestinal sites of dogs and humans, as well as from poultry meat. Although ST354 isolates from chicken meat in Western Australia were distinct from all other ST354 isolates, those from poultry meat samples collected in eastern Australia shared many similarities with other ST354 isolates from humans and companion animals.

51 citations

Journal ArticleDOI
TL;DR: This study identified four novel Mcr-3 variants in Aeromonas isolates carrying the respective genes dated back to 2005 suggesting that this gene has existed for more than 12 years.
Abstract: Objectives To investigate Aeromonas spp. isolates for the presence of the novel resistance gene mcr-3 or variants thereof and to characterize the positive isolates by whole genome sequence analysis. Methods A total of 479 unrelated Aeromonas isolates were investigated by PCR for the genes mcr-1, mcr-2 and mcr-3. Positive isolates were investigated for their colistin MICs. Species assignment was based on sequence analysis of 16s rRNA and gyrB and rpoB genes. The mcr-carrying contigs obtained by WGS were analysed for the genetic environments of the mcr genes. Results Four (0.84%) Aeromonas isolates were positive in the mcr-3-specific PCR assay, whereas none of the isolates harboured mcr-1 or mcr-2. Each of the four mcr-3 genes encoded a novel variant, which showed amino acid identities of 95.0%-98.0% to the original Mcr-3 protein. These variants were designated Mcr-3.6 [Aeromonas allosaccharophila from golden orfe (Leuciscus idus)], Mcr-3.7 [Aeromonas media from turkey (Meleagris gallopavo)], Mcr-3.8 [Aeromonas jandaei from koi carp (Cyprinus carpio)] and Mcr-3.9 [Aeromonas hydrophila from koi carp]. The isolate harbouring the mcr-3.9 gene carried an additional mcr-3.8 gene and showed a distinctly higher colistin MIC of ≥128 mg/L than all other isolates. The genetic environments of the mcr-3 variant genes in all four isolates differed, but in part resembled the flanking regions of mcr-3.3 from Aeromonas veronii of chicken meat. Conclusions This study identified four novel Mcr-3 variants. The isolates carrying the respective genes dated back to 2005 suggesting that this gene has existed for more than 12 years.

51 citations

Journal ArticleDOI
TL;DR: It is concluded that wastewater used for urban agriculture in the city represents a high risk for spreading bacteria and antimicrobial resistance among humans and animals.

50 citations

Journal ArticleDOI
TL;DR: In a prospective collection of third-generation cephalosporin-resistant E. coli causing BSI, community-associated Clade C1/C2 ST131 predominate in association with blaCTX-M ESBLs, although a significant proportion of non-ST131 strains carried blaCMY-2.
Abstract: Objectives To characterize MDR Escherichia coli from bloodstream infections (BSIs) in Australia, New Zealand and Singapore. Methods We collected third-generation cephalosporin-resistant (3GC-R) E. coli from blood cultures in patients enrolled in a randomized controlled trial from February 2014 to August 2015. WGS was used to characterize antibiotic resistance genes, MLST, plasmids and phylogenetic relationships. Antibiotic susceptibility was determined using disc diffusion and Etest. Results A total of 70 3GC-R E. coli were included, of which the majority were ST131 (61.4%). BSI was most frequently from a urinary source (69.6%), community associated (62.9%) and in older patients (median age 71 years). The median Pitt score was 1 and ICU admission was infrequent (3.1%). ST131 possessed more acquired resistance genes than non-ST131 (P = 0.003). Clade C1/C2 ST131 predominated (30.2% and 53.5% of ST131, respectively) and these were all ciprofloxacin resistant. All clade A ST131 (n = 6) were community associated. The predominant ESBL types were blaCTX-M (80.0%) and were strongly associated with ST131 (95% carried blaCTX-M), with the majority blaCTX-M-15. Clade C1 was associated with blaCTX-M-14 and blaCTX-M-27, whereas blaCTX-M-15 predominated in clade C2. Plasmid-mediated AmpC genes (mainly blaCMY-2) were frequent (17.1%) but were more common in non-ST131 (P < 0.001) isolates from Singapore and Brisbane. Two strains carried both blaCMY-2 and blaCTX-M. The majority of plasmid replicon types were IncF. Conclusions In a prospective collection of 3GC-R E. coli causing BSI, community-associated Clade C1/C2 ST131 predominate in association with blaCTX-M ESBLs, although a significant proportion of non-ST131 strains carried blaCMY-2.

50 citations

Journal ArticleDOI
TL;DR: The timely findings of the recent emergence of tet(X4) gene in food animal support the rapid surveillance and eradication of this gene before it is established, and illustrate the paradigm shift in tigecycline resistance.
Abstract: The recent emergence of plasmid-mediated tigecycline resistance genes, tet(X3) and tet(X4), in animals and humans in China would pose a foreseeable threat to public health. To illustrate this paradigm shift in tigecycline resistance, here, covering the period 2008-2018, we retrospectively analysed a national strain collection of Escherichia coli (n = 2254), obtained from chickens and pigs, in six representative provinces of China. The gene tet(X4) was identified in five pig isolates collected in 2016 and 2018 from the provinces of Sichuan (3/15, 2018), Henan (1/25, 2018) and Guangdong (1/28, 2016), but not in the isolates prior to 2016. None of the isolates was detected harbouring tet(X3). All tet(X4)-positive E. coli exhibited high levels of tigecycline resistance (MICs, 16-64 mg/L), and two were confirmed as colistin resistant, harbouring chromosome-borne mcr-1 gene. The gene tet(X4) was detected on a plasmid in all five isolates, whereas a co-location of tet(X4) on the chromosome of one isolate was observed. Diverse host strains and novel plasmids related to the tet(X4) gene were observed. Our timely findings of the recent emergence of tet(X4) gene in food animal support the rapid surveillance and eradication of this gene before it is established.

50 citations

References
More filters
Journal ArticleDOI
TL;DR: A web server providing a convenient way of identifying acquired antimicrobial resistance genes in completely sequenced isolates was created, and the method was evaluated on WGS chromosomes and plasmids of 30 isolates.
Abstract: Objectives Identification of antimicrobial resistance genes is important for understanding the underlying mechanisms and the epidemiology of antimicrobial resistance. As the costs of whole-genome sequencing (WGS) continue to decline, it becomes increasingly available in routine diagnostic laboratories and is anticipated to substitute traditional methods for resistance gene identification. Thus, the current challenge is to extract the relevant information from the large amount of generated data.

3,956 citations


"In Silico Detection and Typing of P..." refers methods in this paper

  • ...To extract the relevant information from the large amount of data generated, a Web-based tool, ResFinder, for the identification of acquired or intrinsically present antimicrobial resistance genes in whole-genome data was recently developed (15)....

    [...]

Journal ArticleDOI
TL;DR: NCBI’s Conserved Domain Database (CDD) is a resource for the annotation of protein sequences with the location of conserved domain footprints, and functional sites inferred from these footprints.
Abstract: NCBI's Conserved Domain Database (CDD) is a resource for the annotation of protein sequences with the location of conserved domain footprints, and functional sites inferred from these footprints. CDD includes manually curated domain models that make use of protein 3D structure to refine domain models and provide insights into sequence/structure/function relationships. Manually curated models are organized hierarchically if they describe domain families that are clearly related by common descent. As CDD also imports domain family models from a variety of external sources, it is a partially redundant collection. To simplify protein annotation, redundant models and models describing homologous families are clustered into superfamilies. By default, domain footprints are annotated with the corresponding superfamily designation, on top of which specific annotation may indicate high-confidence assignment of family membership. Pre-computed domain annotation is available for proteins in the Entrez/Protein dataset, and a novel interface, Batch CD-Search, allows the computation and download of annotation for large sets of protein queries. CDD can be accessed via http://www.ncbi.nlm.nih.gov/Structure/cdd/cdd.shtml.

2,934 citations


"In Silico Detection and Typing of P..." refers background in this paper

  • ...In particular, the replicase proteins showing the pfam02387 or pfam01051 conserved domains were assigned to the FII and FIB groups, respectively (31)....

    [...]

Journal ArticleDOI
TL;DR: Results indicated that the inc/rep PCR method demonstrates high specificity and sensitivity in detecting replicons on reference plasmids and also revealed the presence of recurrent and common plasmid in epidemiologically unrelated Salmonella isolates of different serotypes.

2,163 citations


"In Silico Detection and Typing of P..." refers methods in this paper

  • ...A collection of 24 previously characterized and fully FIG 1 Numbers of fully sequenced plasmids (y axis) classified into incompatibility groups occurring in the different bacterial species of the Enterobacteriaceae family....

    [...]

  • ...Since 2005, a PCR-based replicon typing (PBRT) scheme has been available that targets in multiplex PCRs the replicons of the major plasmid families occurring in members of the family Enterobacteriaceae (2)....

    [...]

  • ...Here, we present two free, easy-to-use Web tools, PlasmidFinder and pMLST, to analyze and classify plasmids from bacterial species of the family Enterobacteriaceae....

    [...]

  • ...Here, we describe the design of two new easy-to-use Web tools useful for the rapid identification of plasmids in Enterobacteriaceae species that are of interest for epidemiological and clinical microbiology investigations of the plasmid-associated spread of antimicrobial resistance....

    [...]

  • ...This method was initially developed to detect the replicons of plasmids belonging to the 18 major incompatibility (Inc) groups of Enterobacteriaceae species (3)....

    [...]

Journal ArticleDOI
TL;DR: The Bacterial Isolate Genome Sequence Database (BIGSDB) represents a freely available resource that will assist the broader community in the elucidation of the structure and function of bacteria by means of a population genomics approach.
Abstract: The opportunities for bacterial population genomics that are being realised by the application of parallel nucleotide sequencing require novel bioinformatics platforms These must be capable of the storage, retrieval, and analysis of linked phenotypic and genotypic information in an accessible, scalable and computationally efficient manner The Bacterial Isolate Genome Sequence Database (BIGSDB) is a scalable, open source, web-accessible database system that meets these needs, enabling phenotype and sequence data, which can range from a single sequence read to whole genome data, to be efficiently linked for a limitless number of bacterial specimens The system builds on the widely used mlstdbNet software, developed for the storage and distribution of multilocus sequence typing (MLST) data, and incorporates the capacity to define and identify any number of loci and genetic variants at those loci within the stored nucleotide sequences These loci can be further organised into 'schemes' for isolate characterisation or for evolutionary or functional analyses Isolates and loci can be indexed by multiple names and any number of alternative schemes can be accommodated, enabling cross-referencing of different studies and approaches LIMS functionality of the software enables linkage to and organisation of laboratory samples The data are easily linked to external databases and fine-grained authentication of access permits multiple users to participate in community annotation by setting up or contributing to different schemes within the database Some of the applications of BIGSDB are illustrated with the genera Neisseria and Streptococcus The BIGSDB source code and documentation are available at http://pubmlstorg/software/database/bigsdb/ Genomic data can be used to characterise bacterial isolates in many different ways but it can also be efficiently exploited for evolutionary or functional studies BIGSDB represents a freely available resource that will assist the broader community in the elucidation of the structure and function of bacteria by means of a population genomics approach

1,943 citations

Journal ArticleDOI
TL;DR: A Web-based method for MLST of 66 bacterial species based on whole-genome sequencing data that enables investigators to determine the sequence types of their isolates on the basis of WGS data.
Abstract: Accurate strain identification is essential for anyone working with bacteria. For many species, multilocus sequence typing (MLST) is considered the “gold standard” of typing, but it is traditionally performed in an expensive and time-consuming manner. As the costs of whole-genome sequencing (WGS) continue to decline, it becomes increasingly available to scientists and routine diagnostic laboratories. Currently, the cost is below that of traditional MLST. The new challenges will be how to extract the relevant information from the large amount of data so as to allow for comparison over time and between laboratories. Ideally, this information should also allow for comparison to historical data. We developed a Web-based method for MLST of 66 bacterial species based on WGS data. As input, the method uses short sequence reads from four sequencing platforms or preassembled genomes. Updates from the MLST databases are downloaded monthly, and the best-matching MLST alleles of the specified MLST scheme are found using a BLAST-based ranking method. The sequence type is then determined by the combination of alleles identified. The method was tested on preassembled genomes from 336 isolates covering 56 MLST schemes, on short sequence reads from 387 isolates covering 10 schemes, and on a small test set of short sequence reads from 29 isolates for which the sequence type had been determined by traditional methods. The method presented here enables investigators to determine the sequence types of their isolates on the basis of WGS data. This method is publicly available at www.cbs.dtu.dk/services/MLST.

1,620 citations


"In Silico Detection and Typing of P..." refers methods in this paper

  • ...If raw sequence reads are uploaded, they are first assembled (after the sequencing platform is given by the user) as described previously (16)....

    [...]