scispace - formally typeset
Open AccessJournal ArticleDOI

Influence of Jog Concentration on the Conservative Motion of Dislocations in Copper

Pierre Petroff, +1 more
- 01 Dec 1966 - 
- Vol. 37, Iss: 13, pp 4987-4990
Reads0
Chats0
TLDR
In this article, the critical resolved shear stress necessary to move circular prismatic edge-dislocation loops along their glide cylinders was compared to the range of stresses within which various segments of the three-dimensional network began to move.
Abstract
In an annealed crystal of low dislocation density, the critical resolved shear stress necessary to move circular prismatic edge‐dislocation loops along their glide cylinders was compared to the range of stresses within which various segments of the three‐dimensional network began to move. Etch‐pit observations showed that the first segments of the network moved at 2 g/mm2 but that only 60% had moved when the maximum resolved shear stress had reached 38 g/mm2.Circular prismatic loops, which because of their shape have a high jog concentration, were found to move at a critical resolved shear stress greater than 50 g/mm2. It was suggested that jog concentration should be expected to vary from one segment to another of the three‐dimensional network in an annealed crystal, and that this is probably one important reason for the widely different stresses at which individual segments begin to move.

read more

Content maybe subject to copyright    Report

Lawrence Berkeley National Laboratory
Recent Work
Title
INFLUENCE OF JOG CONCENTRATION ON THE CONSERVATIVE MOTION OF DISLOCATIONS
IN COPPER
Permalink
https://escholarship.org/uc/item/7kx7v9jp
Authors
Petroff, Pierre
Washburn, Jack.
Publication Date
1966-05-01
eScholarship.org Powered by the California Digital Library
University of California

TWO-WEEK LOAN COPY
This
is a LIbrary Circulating Copy
whIch may be borrowed for two weeks.
For a personal retentIon copy,call
Tech. Info. DivIsIon, Ext. 5545

DISCLAIMER
This document was prepared as an account of work sponsored by the United States
Government. While this document is believed to contain correct information, neither the
United States Government nor any agency thereof, nor the Regents of the University of
California, nor any of their employees, makes any warranty, express or implied, or
assumes any legal responsibility for the accuracy, completeness, or usefulness of any
information, apparatus, product, or process disclosed, or represents that its use would not
infringe privately owned rights. Reference herein to any specific commercial product,
process, or service by its trade name, trademark, manufacturer, or otherwise, does not
necessarily constitute or imply its endorsement, recommendation, or favoring by the
United States Government or any agency thereof, or the Regents of the University of
California. The views and opinions of authors expressed herein do not necessarily state or
reflect those of the United States Government or any agency thereof or the Regents of the
University of California.
14

Jourm*1 of Applied Physics
UCRI-
1.6859
Preprint
P
.
UIflVERSITY OF CALIFORNIA
Lawrence Radiation Laboratory
Berkeley, California
ARC Contract No. W-71405.-eng-48

INFLUENCE OF JOG CONCENTRATION ON THE CONSERVATIVE
MOTION OF DISLOCATIONS IN COPPER
Pierre Petroff and Jack Washburn
• Inorganic Materials Research Division, Lawrence Radiation Laboratory,
and Department of Mineral Technology, College of Engineering,
University of California, Berkeley, California
May1966
ABSTRACT
In an annealed crystal of low dislocation density the critical
resolved shear stress necessary t'o move circular prismatic edge dislocation
loops along their glide cylinders was ccnpared to the range of stresses
within which various segments of the three dimensional network began to move.
Etch-pit observations showed that the first segments ofthe network moved
at 2g/mm
2
but that only 60% had moved when the maximum resolved shear
stress had reached 38g/mm 2
Circular prismatic loops, which because of their shape have a
high log concentration, were found to move at a critical resolved shear
stress greater than
509/rxmi
2
.
It was suggested that jog concentration
should be expected to vary from one segment to another of the three
dimensional network in an annealed crystal and that this is probabiy
one important reason for the widely differenttresses at which individual
segments begin to move.
-
-
-
-

Citations
More filters
Journal ArticleDOI

Etch pit study of dislocation breakaway in pre‐yield deformation of copper single crystals

TL;DR: In this paper, three-point bending tests on Cu single crystals of low dislocation density and double etching are performed to study the stress dependence of breakaway of grown-in dislocations in the pre-yield region.
Journal Article

Yielding Mechanism of Highly Perfect Copper Single Crystals

TL;DR: In this article, the behavior of dislocation multiplication was investigated using etch pit techniques for high-quality copper crystals with few sub-grain boundaries and low initial dislocation densities from 3.4x10 to 8.3x10 cm.
References
More filters
Journal ArticleDOI

Etch Pits at Dislocations in Copper

TL;DR: A modification of an etch discovered by Lovell and Wernick has been shown to be a reliable means of revealing dislocations as etch pits on (111) faces of copper crystals as mentioned in this paper.
Journal ArticleDOI

The spacing of prismatic dislocation loops

TL;DR: In this paper, the stresses round a circular prismatic dislocation loop are determined and used to calculate the spacings between such loops in a row generated from a source of internal stress.
Journal ArticleDOI

Elastic‐Plastic Transition in Copper Crystals as Determined by an Etch‐Pit Technique

TL;DR: In this paper, the authors used pure bending moment (Pfister's moment) to stress a set of coarse-grained copper (99.999%) crystals with a dislocation density of 50/mm2 and found that the resolved stress necessary to move grown-in dislocations was about 4 g/mm 2.
Journal ArticleDOI

Stress-generated prismatic dislocation loops in quenched copper

R.S Barnes, +1 more
- 01 Apr 1963 - 
TL;DR: In this paper, a number of prismatic dislocation loops have been observed in thin films obtained from copper foils which have been water quenched from 1055°C. The spacing of the loops is consistent with the theory of Bullough and Newman, which enables a value of the critical resolved shear stress to be estimated.
Journal ArticleDOI

The initiation of plastic flow in copper

TL;DR: In this paper, the continuous shear stress shear strain behavior for tubular polycrystalline specimens of copper and its dilute alloys deformed in torsion at room temperature was studied using a strain resolution of the order of 10−9.