Inorganic nanotubes reinforced polyvinylidene fluoride composites as low-cost electromagnetic interference shielding materials
TL;DR: Electromagnetic interference shielding effectiveness (EMI SE) was measured with vector network analyzer using waveguide sample holder in X-band frequency range and the potential use of the present MNT/f-MWCNT/PVDF composite as low-cost EMI shielding materials inX-band region is indicated.
Abstract: Novel polymer nanocomposites comprising of MnO2 nanotubes (MNTs), functionalized multiwalled carbon nanotubes (f-MWCNTs), and polyvinylidene fluoride (PVDF) were synthesized. Homogeneous distribution of f-MWCNTs and MNTs in PVDF matrix were confirmed by field emission scanning electron microscopy. Electrical conductivity measurements were performed on these polymer composites using four probe technique. The addition of 2 wt.% of MNTs (2 wt.%, f-MWCNTs) to PVDF matrix results in an increase in the electrical conductivity from 10-16S/m to 4.5 × 10-5S/m (3.2 × 10-1S/m). Electromagnetic interference shielding effectiveness (EMI SE) was measured with vector network analyzer using waveguide sample holder in X-band frequency range. EMI SE of approximately 20 dB has been obtained with the addition of 5 wt.% MNTs-1 wt.% f-MWCNTs to PVDF in comparison with EMI SE of approximately 18 dB for 7 wt.% of f-MWCNTs indicating the potential use of the present MNT/f-MWCNT/PVDF composite as low-cost EMI shielding materials in X-band region.
Citations
More filters
TL;DR: A review of the state-of-the-art research in the design and characterization of polymer/carbon based composites as EMI shielding materials can be found in this paper.
Abstract: The extensive development of electronic systems and telecommunications has lead to major concerns regarding electromagnetic pollution. Motivated by environmental questions and by a wide variety of applications, the quest for materials with high efficiency to mitigate electromagnetic interferences (EMI) pollution has become a mainstream field of research. This paper reviews the state-of-the-art research in the design and characterization of polymer/carbon based composites as EMI shielding materials. After a brief introduction, in Section 1, the electromagnetic theory will be briefly discussed in Section 2 setting the foundations of the strategies to be employed to design efficient EMI shielding materials. These materials will be classified in the next section by the type of carbon fillers, involving carbon black, carbon fiber, carbon nanotubes and graphene. The importance of the dispersion method into the polymer matrix (melt-blending, solution processing, etc.) on the final material properties will be discussed. The combination of carbon fillers with other constituents such as metallic nanoparticles or conductive polymers will be the topic of Section 4. The final section will address advanced complex architectures that are currently studied to improve the performances of EMI materials and, in some cases, to impart additional properties such as thermal management and mechanical resistance. In all these studies, we will discuss the efficiency of the composites/devices to absorb and/or reflect the EMI radiation.
949 citations
TL;DR: In this paper, the EMI shielding effectiveness of flexible polymer composites comprising of metals and various forms of carbon nanofillers such as carbon black, carbon nano-frillers, carbon nanotubes, graphite, graphene, graphene oxide, graphene nanosheets and graphene nanoribbons has been deeply reviewed.
Abstract: The rapid proliferation and elevated usage of electronic devices have led to a meteoritic rise in electronic pollutions such as electronic noise, electromagnetic interference (EMI) and radiofrequency interference (RFI) which leads to improper functioning of electronic devices. Metals and their alloys can serve as the best EMI shielding materials but their heavy weight, high cost and low corrosion resistance have limited their applications in EMI shielding. The emergence of flexible polymer composites have substituted the metal and metal alloy based EMI shielding materials due to their unique features such as light weight, excellent corrosion resistance, superior electrical, dielectric, thermal, mechanical and magnetic properties that are highly useful for suppressing the electromagnetic noises. In this review article, the EMI shielding effectiveness of flexible polymer composites comprising of metals and various forms of carbon nanofillers such as carbon black, carbon nanofibers, carbon nanotubes, graphite, graphene, graphene oxide, graphene nanosheets, graphene nanoribbons and graphene nanoplatelets have been deeply reviewed.
466 citations
TL;DR: In this article, a real-time strain response of functionalized graphene-polyvinylidene fluoride (f-G-PVDF) nanocomposite films was demonstrated under tensile loads.
Abstract: Functionalized graphene–polyvinylidene fluoride (f-G–PVDF) nanocomposite films were synthesized using a simple solvent casting technique. The investigation demonstrates the real time strain response of f-G–PVDF nanocomposites on the macro-scale under tensile loads and the use of this nanocomposite as strain sensor. This is ascribed to the variation of electrical properties of graphene–polymer upon mechanical deformation at the nanoscale.
178 citations
TL;DR: The composites show typical hydroxyapatite bioactivity, good cell adhesion and spreading at the scaffolds surface, indicating that the produced 3D, three-phase, scaffolds are promising materials in the field of bone regenerative medicine.
Abstract: A three-phase [nanocrystalline hydroxyapatite (HA), carbon nanotubes (CNT), mixed in a polymeric matrix of polycaprolactone (PCL)] composite scaffold produced by 3D printing is presented. The CNT content varied between 0 and 10 wt % in a 50 wt % PCL matrix, with HA being the balance. With the combination of three well-known materials, these scaffolds aimed at bringing together the properties of all into a unique material to be used in tissue engineering as support for cell growth. The 3D printing technique allows producing composite scaffolds having an interconnected network of square pores in the range of 450-700 μm. The 2 wt % CNT scaffold offers the best combination of mechanical behaviour and electrical conductivity. Its compressive strength of ∼4 MPa is compatible with the trabecular bone. The composites show typical hydroxyapatite bioactivity, good cell adhesion and spreading at the scaffolds surface, this combination of properties indicating that the produced 3D, three-phase, scaffolds are promising materials in the field of bone regenerative medicine. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1210-1219, 2016.
172 citations
Cites background from "Inorganic nanotubes reinforced poly..."
...As a means of evaluating the effect of the CNT content on the mechanical properties of the scaffolds, the stress at the yield at the first inflexion point can be considered the compressive yield strength, or the load-bearing capacity of the composite materials.(36) The yield stress is graphically presented as a function of CNT content in the chart of Figure 8C....
[...]
TL;DR: Soft conducting composites designed with doped multiwalled carbon nanotubes and a three-dimensional cross-linked graphene oxide (GO) framework doped with ferrite nanoparticles produce a very high electromagnetic shielding efficiency (SE) of -37 dB at 18 GHz, dominated by absorption-driven shielding.
Abstract: To minimize electromagnetic (EM) pollution, two key parameters, namely, intrinsic wave impedance matching and intense absorption of incoming EM radiation, must satisfy the utmost requirements. To target these requirements, soft conducting composites consisting of binary blends of polycarbonate (PC) and poly(vinylidene fluoride) (PVDF) were designed with doped multiwalled carbon nanotubes (MWCNTs) and a three-dimensional cross-linked graphene oxide (GO) framework doped with ferrite nanoparticles. The doping of α-MnO2 onto the MWCNTs ensured intrinsic wave impedance matching in addition to providing conducting pathways, and the ferrite-doped cross-linked GO facilitated the enhanced attenuation of the incoming EM radiation. This unique combination of magnetodielectric coupling led to a very high electromagnetic shielding efficiency (SE) of −37 dB at 18 GHz, dominated by absorption-driven shielding. The promising results from the composites further motivated us to rationally stack individual composites into a...
167 citations
References
More filters
NEC1
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Abstract: THE synthesis of molecular carbon structures in the form of C60 and other fullerenes1 has stimulated intense interest in the structures accessible to graphitic carbon sheets. Here I report the preparation of a new type of finite carbon structure consisting of needle-like tubes. Produced using an arc-discharge evaporation method similar to that used for fullerene synthesis, the needles grow at the negative end of the electrode used for the arc discharge. Electron microscopy reveals that each needle comprises coaxial tubes of graphitic sheets, ranging in number from 2 up to about 50. On each tube the carbon-atom hexagons are arranged in a helical fashion about the needle axis. The helical pitch varies from needle to needle and from tube to tube within a single needle. It appears that this helical structure may aid the growth process. The formation of these needles, ranging from a few to a few tens of nanometres in diameter, suggests that engineering of carbon structures should be possible on scales considerably greater than those relevant to the fullerenes. On 7 November 1991, Sumio Iijima announced in Nature the preparation of nanometre-size, needle-like tubes of carbon — now familiar as 'nanotubes'. Used in microelectronic circuitry and microscopy, and as a tool to test quantum mechanics and model biological systems, nanotubes seem to have unlimited potential.
39,086 citations
"Inorganic nanotubes reinforced poly..." refers background in this paper
...Ever since the discovery by Ijima [8], carbon nanotubes (CNT) have attracted considerable research interest owing to their unique physical and chemical properties [9,10]....
[...]
TL;DR: In this article, a review of the progress to date in the field of mechanical reinforcement of polymers using nanotubes is presented, and the most promising processing methods for mechanical reinforcement are discussed.
Abstract: The superlative mechanical properties of carbon nanotubes make them the filler material of choice for composite reinforcement. In this paper we review the progress to date in the field of mechanical reinforcement of polymers using nanotubes. Initially, the basics of fibre reinforced composites are introduced and the prerequisites for successful reinforcement discussed. The effectiveness of different processing methods is compared and the state of the art demonstrated. In addition we discuss the levels of reinforcement that have actually been achieved. While the focus will be on enhancement of Young’s modulus we will also discuss enhancement of strength and toughness. Finally we compare and tabulate these results. This leads to a discussion of the most promising processing methods for mechanical reinforcement and the outlook for the future.
3,770 citations
TL;DR: Carbon materials for electromagnetic interference (EMI) shielding are reviewed in this article, including composite materials, colloidal graphite and flexible graphite, and they include carbon filaments of submicron diameter.
Abstract: Carbon materials for electromagnetic interference (EMI) shielding are reviewed. They include composite materials, colloidal graphite and flexible graphite. Carbon filaments of submicron diameter are effective for use in composite materials, especially after electroplating with nickel. Flexible graphite is attractive for EMI gaskets.
1,676 citations
"Inorganic nanotubes reinforced poly..." refers background in this paper
...EMI shielding refers to the reflection or absorption or multiple reflection of the electromagnetic radiation by a shielding material which thereby acts as a shield against the penetration of the radiation through it [2]....
[...]
Book•
03 May 2006
TL;DR: In this paper, the authors discuss the development of single-walled carbon nanotubes as AFM probes and the application of nanotube probe tips in AFM imaging.
Abstract: The Element Carbon Frank Hennrich, Valerie Moore, Marco Rolandi, and Mike O'Connell Allotropes of Carbon History Structure Progress of Single-Walled Carbon Nanotube Research toward Application References Synthesis of Carbon Nanotubes David Mann Introduction CNT Synthesis Methods Overview Specifics of CVD Growth Method Recent Advances in SWCNT Growth Control Conclusion References Carbon Nanotube Peapod Materials Satishkumar B. Chikkannanavar, Brian W. Smith, and David E. Luzzi Introduction and Historical Perspective C60@SWNT Beyond C60: Other Hierarchical Nanotube Materials Ordered Phases of Fullerenes in Larger Nanotubes Double-Wall Carbon Nanotubes Conclusions and Future Prospects Acknowledgments References Carbon Nanotube Electronics and Devices Marcus Freitag Metallic Carbon Nanotubes Semiconducting Carbon Nanotubes Outlook and Challenges References Magnetic Properties Junichiro Kono and Stephan Roche Introduction Theoretical Perspectives Experimental Results Acknowledgments References Raman Spectroscopy of Single-Walled Carbon Nanotubes: Probing Electronic and Chemical Behavior Stephen K. Doorn, Daniel Heller, Monica Usrey, Paul Barone, and Michael S. Strano Introduction Resonance Raman Studies of Carbon Nanotubes Raman Characterization of Nanotube Samples and Nanotube Reactivity Conclusions References Electromechanical Properties and Applications of Carbon Nanotubes Randal J. Grow Introduction Piezoresistance Theory of Strain-Induced Band-Gap Changes in Carbon Nanotubes Electrical Measurements of Strain-Induced Band-Gap Changes in Suspended Tubes Electrical Measurements of Strain-Induced Band-Gap Changes in Tubes on a Surface Conclusion of Piezoresistance of Nanotubes Electrostatic actuation Nanoelectromechanical systems Conclusion References Carbon Nanotube-Enabled Materials Han Gi Chae, Jing Liu, and Satish Kumar Introduction Dispersion and Processing Issues Characterization of Polymer/CNT Composites CNT Films and Fibers Polymer/CNT Composite Films and Fibers Crystallization, Wrapping, Interaction, and Intercalation Concluding Remarks Acknowledgment References Functionalized Carbon Nanotubes in Composites Christopher A. Dyke and James M. Tour Introduction SWNT Preparation and Characterization Functionalized SWNTs Carbon Nanotube-Modified Composites Conclusions Acknowledgments References Carbon Nanotube Tips for Scanning Probe Microscopy C. Patrick Collier Carbon nanotubes as AFM probes Fabrication of nanotube probe tips AFM imaging with nanotube probes Applications of carbon nanotube probes Future directions Acknowledgments References Index
1,416 citations
TL;DR: In this article, the electromagnetic interference (EMI) shielding mechanisms of multi-walled carbon nanotube (MWCNT)/polymer composites were analyzed experimentally and theoretically.
Abstract: The electromagnetic interference (EMI) shielding mechanisms of multi-walled carbon nanotube (MWCNT)/polymer composites were analyzed experimentally and theoretically. For the experimental analysis, EMI shielding effectiveness (SE) of MWCNT/polypropylene (PP) composite plates made in three different thicknesses and at four different concentrations were studied. A model based on the shielding of electromagnetic plane wave was used to theoretically study the EMI shielding mechanisms. The experimental results showed that absorption is the major shielding mechanism and reflection is the secondary shielding mechanism. The modeling results demonstrated that multiple-reflection within MWCNT internal surfaces and between MWCNT external surfaces decrease the overall EMI SE. The EMI SE of MWCNT/PP composites increased with increase in MWCNT content and shielding plate thickness.
1,222 citations
"Inorganic nanotubes reinforced poly..." refers background in this paper
...reinforcing materials possessing excellent electrical and mechanical properties and their unique one-dimensional structure [16,17] make them ideal for creating overlapping conductive network for high-performance EMI shielding at low loadings [18-21]....
[...]