Journal ArticleDOI
Interfacial damping characteristics of carbon nanotube-based composites
Reads0
Chats0
TLDR
In this paper, the structural damping characteristics of polymeric composites containing single-walled carbon nanotubes (SWNTs) were investigated, with a focus on analyzing the interfacial interaction between the CNT and the resin materials.About:
This article is published in Composites Science and Technology.The article was published on 2004-11-01. It has received 348 citations till now. The article focuses on the topics: Carbon nanotube & Nanotube.read more
Citations
More filters
Journal ArticleDOI
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review
TL;DR: In this paper, a review of the current understanding of carbon nanotubes and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT-based functionalization on the properties of polymers.
Journal ArticleDOI
Enhanced mechanical properties of nanocomposites at low graphene content.
TL;DR: Graphene platelets significantly out-perform carbon nanotube additives in terms of mechanical properties enhancement, and may be related to their high specific surface area, enhanced nanofiller-matrix adhesion/interlocking arising from their wrinkled (rough) surface, as well as the two-dimensional geometry of graphene platelets.
Journal ArticleDOI
Applications of nanotechnology in food packaging and food safety: Barrier materials, antimicrobials and sensors
TL;DR: Several applications of nanomaterials in food packaging and food safety are reviewed, including polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomMaterial-based assays for the detection of food-relevant analytes.
Journal ArticleDOI
Nanocomposites for food packaging applications
TL;DR: Nanoparticles have proportionally larger surface area than their microscale counterparts, which favors the filler-matrix interactions and the performance of the resulting material as mentioned in this paper, and they can have other functions when added to a polymer, such as antimicrobial activity, enzyme immobilization, biosensing, etc.
Journal ArticleDOI
A review of recent research on mechanics of multifunctional composite materials and structures
TL;DR: In this paper, the authors identify the topics that are most relevant to multifunctional composite materials and structures and review representative journal publications that are related to those topics and make suggestions regarding future research needs.
References
More filters
Journal ArticleDOI
Helical microtubules of graphitic carbon
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Journal ArticleDOI
Exceptionally high Young's modulus observed for individual carbon nanotubes
TL;DR: In this article, the amplitude of the intrinsic thermal vibrations of isolated carbon nanotubes was measured in the transmission electron microscopy (TEM) and it was shown that they have exceptionally high Young's moduli, in the terapascal (TPa) range.
Journal ArticleDOI
Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load
TL;DR: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope and a variety of structures were revealed, such as a nanotube ribbon, a wave pattern, and partial radial collapse.
Journal ArticleDOI
Advances in the science and technology of carbon nanotubes and their composites: a review
TL;DR: A review of recent advances in carbon nanotubes and their composites can be found in this article, where the authors examine the research work reported in the literature on the structure and processing of carbon Nanotubes.
Journal ArticleDOI
Nanobeam mechanics: Elasticity, strength, and toughness of nanorods and nanotubes
TL;DR: In this paper, the Young's modulus, strength, and toughness of nanostructures are evaluated using an atomic force microscopy (AFM) approach. And the results showed that the strength of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values.