Introduction to Surface Roughness and Scattering
01 Jan 1991-Precision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology-Vol. 13, Iss: 1, pp 62
About: This article is published in Precision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology.The article was published on 1991-01-01. It has received 369 citations till now. The article focuses on the topics: Surface roughness & Scattering.
Citations
More filters
Journal Article•
TL;DR: The aim of the present study was to suggest standards for topographic evaluation of oral implants in terms of measuring equipment, filtering process, and selection of parameters.
Abstract: The bone anchorage components of commercially available oral implant systems differ in surface roughness by at least sixfold. Correct reporting of the surface roughness of implant systems is important, since one cannot exclude the possibility that surface roughness will influence clinical results. However, many confusing statements are found in the literature when the surface topography of implants is described. Different measuring instruments and techniques strongly influence the outcome of a topographic characterization. Furthermore, a screw-type design introduces problems for most measuring instruments. Without a standard procedure, it is generally impossible to compare values from one study with another. The aim of the present study was to suggest standards for topographic evaluation of oral implants in terms of measuring equipment, filtering process, and selection of parameters. It is suggested that the measuring instrument be able to measure all parts of a threaded implant if the investigation relates to such a design. Preferably, 3-dimensional measurements should be performed. On screw-type implants, tops, valleys, and flanks should be evaluated. At least 3 samples in a batch should be evaluated, filter size must be specified, and at least one of each height, spatial, and hybrid parameter should be presented.
446 citations
TL;DR: Two-dimensional power spectral density functions were calculated from the digitized measurement data, and roughnesses were obtained by integrating areas under the PSD curves between fixed upper and lower band limits.
Abstract: Surface topography and light scattering were measured on 15 samples ranging from those having smooth surfaces to others with ground surfaces. The measurement techniques included an atomic force microscope, mechanical and optical profilers, confocal laser scanning microscope, angle-resolved scattering, and total scattering. The samples included polished and ground fused silica, silicon carbide, sapphire, electroplated gold, and diamond-turned brass. The measurement instruments and techniques had different surface spatial wavelength band limits, so the measured roughnesses were not directly comparable. Two-dimensional power spectral density (PSD) functions were calculated from the digitized measurement data, and we obtained rms roughnesses by integrating areas under the PSD curves between fixed upper and lower band limits. In this way, roughnesses measured with different instruments and techniques could be directly compared. Although smaller differences between measurement techniques remained in the calculated roughnesses, these could be explained mostly by surface topographical features such as isolated particles that affected the instruments in different ways.
377 citations
TL;DR: In this paper, the Mauna Kea Observatories Near-Infrared (MKO-NIR) filter set is designed to reduce background noise, improve photometric transformations from observatory to observatory, provide greater accuracy in extrapolating to zero air mass, and reduce the color dependence in the extinction coefficient.
Abstract: We present a description of a new 1--5 $\mu$m filter set similar to the long-used JHKLM filter set derived from that of Johnson. The new Mauna Kea Observatories Near-Infrared (MKO-NIR) filter set is designed to reduce background noise, improve photometric transformations from observatory to observatory, provide greater accuracy in extrapolating to zero air mass, and reduce the color dependence in the extinction coefficient in photometric reductions. We have also taken into account the requirements of adaptive optics in setting the flatness specification of the filters. A complete technical description is presented to facilitate the production of similar filters in the future.
327 citations
28 Nov 2005
TL;DR: In this article, the authors investigated the distribution and characteristics of surface cracking formed during standard grinding processes on fused silica glass and found that only a small fraction of the abrasive particles are being mechanically loaded and causing fracture, and it is likely the larger particles in the abrasives particle size distribution that bear the higher loads.
Abstract: The distribution and characteristics of surface cracking (i.e. sub-surface damage or SSD) formed during standard grinding processes has been investigated on fused silica glass. The SSD distributions of the ground surfaces were determined by: (1) creating a shallow (18-108 {micro}m) wedge/taper on the surface by magneto-rheological finishing; (2) exposing the SSD by HF acid etching; and (3) performing image analysis of the observed cracks from optical micrographs taken along the surface taper. The observed surface cracks are characterized as near-surface lateral and deeper trailing indent type fractures (i.e., chatter marks). The SSD depth distributions are typically described by a single exponential distribution followed by an asymptotic cutoff in depth (c{sub max}). The length of the trailing indent is strongly correlated with a given process. Using established fracture indentation relationships, it is shown that only a small fraction of the abrasive particles are being mechanically loaded and causing fracture, and it is likely the larger particles in the abrasive particle size distribution that bear the higher loads. The SSD depth was observed to increase with load and with a small amount of larger contaminant particles. Using a simple brittle fracture model for grinding, the SSD depth distribution has been related tomore » the SSD length distribution to gain insight into ''effective'' size distribution of particles participating in the fracture. Both the average crack length and the surface roughness were found to scale linearly with the maximum SSD depth (c{sub max}). These relationships can serve as useful rules-of-thumb for nondestructively estimating SSD depth and to identify the process that caused the SSD. In certain applications such as high intensity lasers, SSD on the glass optics can serve as a reservoir for minute amounts of impurities that absorb the high intensity laser light and lead to subsequent laser-induced surface damage. Hence a more scientific understanding of SSD formation can provide a means to establish recipes to fabricate SSD-free, laser damage resistant optical surfaces.« less
237 citations
TL;DR: In this article, the authors calculate the band-limited relevant roughness from surface metrology data, then present parametric plots of the TIS for optical surfaces with arbitrary roughness, surface correlation widths, and incident angles.
Abstract: Surface scatter effects from residual optical fabrication errors can severely degrade optical performance. The total integrated scatter (TIS) from a given mirror surface is determined by the ratio of the spatial frequency band-limited "relevant" root-mean-square surface roughness to the wavelength of light. For short-wavelength (extreme-ultraviolet/x-ray) applications, even state-of-the-art optical surfaces can scatter a significant fraction of the total reflected light. In this paper we first discuss how to calculate the band-limited relevant roughness from surface metrology data, then present parametric plots of the TIS for optical surfaces with arbitrary roughness, surface correlation widths, and incident angles. Surfaces with both Gaussian and ABC or K-correlation power spectral density functions have been modeled. These parametric TIS predictions provide insight that is useful in determining realistic optical fabrication tolerances necessary to satisfy specific optical performance requirements.
173 citations