Investigation on Convective Heat Transfer and Flow Features of Nanofluids
01 Feb 2003-Journal of Heat Transfer-transactions of The Asme (American Society of Mechanical Engineers)-Vol. 125, Iss: 1, pp 151-155
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
Citations
More filters
TL;DR: In this paper, a numerical investigation of mixed convection flows through a copper-water nanofluid in a square cavity with inlet and outlet ports has been executed, where the governing equations have been solved using the finite volume approach, using SIMPLE algorithm on the collocated arrangement.
123 citations
TL;DR: In this article, an analytical and numerical study of natural convection in a shallow rectangular cavity filled with nanofluids is presented, where analytical solutions for the stream function and temperature are obtained using a parallel flow approximation in the core region of the cavity and an integral form of the energy equation.
122 citations
TL;DR: In this article, the steady general three-dimensional stagnation-point flow of an aqueous titania-copper hybrid nanofluid past a circular cylinder that has a sinusoidal radius variation was investigated.
Abstract: Purpose
The purpose of this paper is to investigate analytically the steady general three-dimensional stagnation-point flow of an aqueous titania-copper hybrid nanofluid past a circular cylinder that has a sinusoidal radius variation.
Design/methodology/approach
First, the analytic modeling of hybrid nanofluid is presented, and using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved by the well-known function bvp4c from MATLAB.
Findings
The current solution demonstrates good agreement with those of the previously published studies in the special cases of regular fluid and nanofluids. Graphical results are presented to investigate the influences of the titania and copper nanoparticle volume fractions and also the nodal/saddle indicative parameter on flow and heat transfer characteristics. Here, the thermal characteristics of hybrid nanofluid are found to be higher in comparison to the base fluid and fluid containing single nanoparticles. An important point to note is that the developed model can be used with great confidence to study the flow and heat transfer of hybrid nanofluids.
Originality/value
Analytic modeling of hybrid nanofluid is the important originality of present study. Hybrid nanofluids are potential fluids that offer better heat transfer performance and thermophysical properties than convectional heat transfer fluids (oil, water and ethylene glycol) and nanofluids with single nanoparticles. In this investigation, titania (TiO2, 50 nm), copper (Cu, 20 nm) and the hybrid of these two are separately dispersed into the water as the base fluid and analyzed.
122 citations
TL;DR: In this paper, three kinds of nanofluids were prepared by dispersing γ-Al2O3, CuO, and TiO2 nanoparticles in an aqueous solution of carboxymethyl cellulose (CMC).
122 citations
TL;DR: In this paper, the effect of the solid volume fraction parameter φ of the nanofluids was investigated for forced convection boundary layer flow and heat transfer past a semi-infinite static flat plate (Blasius problem) and past a moving Semi-Infinite Flat Plate (Sakiadis problem), and the similarity equations were solved numerically for three types of metallic or nonmetallic nanoparticles such as copper (Cu), alumina (Al2O3), and titania (TiO2) in the base fluid of water with the Prand
Abstract: The classical problems of forced convection boundary layer flow and heat transfer past a semi-infinite static flat plate (Blasius problem) and past a moving semi-infinite flat plate (Sakiadis problem) using nanofluids are theoretically studied. The similarity equations are solved numerically for three types of metallic or nonmetallic nanoparticles such as copper (Cu), alumina (Al2O3), and titania (TiO2) in the base fluid of water with the Prandtl number Pr = 6.2 to investigate the effect of the solid volume fraction parameter φ of the nanofluids. Also, the case of conventional or regular fluid (φ = 0) with Pr = 0.7 is considered for comparison with known results from the open literature. The comparison shows excellent agreement. The skin friction coefficient, Nusselt number, and the velocity and temperature profiles are presented and discussed in detail. It is found that the solid volume fraction affects the fluid flow and heat transfer characteristics.
122 citations
References
More filters
Book•
01 Jan 1985
TL;DR: In this article, the physical concepts and methodologies of heat and mass transfer are explained for advanced undergraduate engineering majors, using a systematic method for problem solving and discusses the relationship of heat transfer to many important practical applications through examples and problems.
Abstract: This book, designed for advanced undergraduate engineering majors, explains the physical concepts and methodologies of heat and mass transfer. It uses a systematic method for problem solving and discusses the relationship of heat and mass transfer to many important practical applications through examples and problems. A and significant contribution is the extensive use of the First Law of thermodynamics.
4,113 citations
TL;DR: In this article, the authors used a Brookfield rotating viscometer to measure the viscosities of the dispersed fluids with γ-alumina (Al2O3) and titanium dioxide (TiO2) particles at a 10% volume concentration.
Abstract: Turbulent friction and heat transfer behaviors of dispersed fluids (i.e., uttrafine metallic oxide particles suspended in water) in a circular pipe were investigated experimentally. Viscosity measurements were also conducted using a Brookfield rotating viscometer. Two different metallic oxide particles, γ-alumina (Al2O3) and titanium dioxide (TiO2), with mean diameters of 13 and 27 nm, respectively, were used as suspended particles. The Reynolds and Prandtl numbers varied in the ranges l04-I05 and 6.5-12.3, respectively. The viscosities of the dispersed fluids with γ-Al2O3 and TiO2 particles at a 10% volume concentration were approximately 200 and 3 times greater than that of water, respectively. These viscosity results were significantly larger than the predictions from the classical theory of suspension rheology. Darcy friction factors for the dispersed fluids of the volume concentration ranging from 1% to 3% coincided well with Kays' correlation for turbulent flow of a single-phase fluid. The Nusselt n...
3,730 citations
3,019 citations
"Investigation on Convective Heat Tr..." refers background in this paper
...Hamilton and Crasser (1962) have developed a more elaborate model for the effective thermal conductivity of twocomponent mixtures as a function of the conductivity of the pure materials, the composition of the mixture, and the shape of the dispersed particles....
[...]
TL;DR: In this paper, a transient hot-wire method was used to measure the thermal conductivity of a small amount of nanoparticles and the experimental results showed that these nanoparticles have substantially higher thermal conductivities than the same liquids without nanoparticles.
Abstract: Oxide nanofluids were produced and their thermal conductivities were measured by a transient hot-wire method. The experimental results show that these nanofluids, containing a small amount of nanoparticles, have substantially higher thermal conductivities than the same liquids without nanoparticles. Comparisons between experiments and the Hamilton and Crosser model show that the model can predict the thermal conductivity of nanofluids containing large agglomerated Al{sub 2}O{sub 3} particles. However, the model appears to be inadequate for nanofluids containing CuO particles. This suggests that not only particle shape but size is considered to be dominant in enhancing the thermal conductivity of nanofluids.
2,811 citations
TL;DR: In this article, the authors proposed two different approaches for deriving heat transfer correlation of the nanofluid, and investigated the mechanism of heat transfer enhancement of the nano-fluid.
2,355 citations