Investigation on Convective Heat Transfer and Flow Features of Nanofluids
01 Feb 2003-Journal of Heat Transfer-transactions of The Asme (American Society of Mechanical Engineers)-Vol. 125, Iss: 1, pp 151-155
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
Citations
More filters
TL;DR: In this paper, the authors used an alumina and titania nano-coolant (NC) to enhance the heat dissipation performance of an air-cooled radiator.
108 citations
TL;DR: In this paper, the properties, preparation and stability of hybrid nanofluids (HNFs) are investigated, and some models and correlations for predicting HNFs properties are presented.
Abstract: These days, the importance of energy consumption has led scientists to optimize thermal devices. One of the solutions proposed for this purpose is using solid nanoparticles to amend the thermal properties of conventional fluids. Adding the nanoparticles into the foundation fluids results in an improvement in the fluid properties (thermal conductivity, viscosity, etc.). Nanofluid (NF) has been drawing attention in various engineering applications in the past decade due to its superior heat transfer characteristics than the conventional working fluid. In recent years, the researchers have focused on adding two or more nanoparticles into foundation fluids, known as hybrid nanoparticles. Hybrid nanofluids (HNFs) suggest a more appropriate heat transfer performance and thermophysical features than the conventional heat transfer fluids (ethylene glycol, water and oil) and even NFs with single nanoparticles. It was proven that HNF can be an alternative to the single NF, since it can provide more heat transfer enhancement, particularly in the context of the solar energy, electromechanical, HVAC, electromechanical and automobile. In the current research, the properties, preparation and stability of HNFs are investigated. Also, some models and correlations for predicting HNFs properties are presented.
108 citations
TL;DR: In this paper, an experimental study was carried out to investigate the effects of aqueous CuO nanofluids on thermal performance of a horizontal mesh heat pipe working at steady sub-atmospheric pressures.
108 citations
TL;DR: In this paper, the effect of oxidized multi-walled carbon nanotubes on transformer oil thermophysical properties was experimentally investigated, and the maximum amount of carbon nanotsubes was chosen up to 0.01% to assure the maximum purity of transformer oil.
Abstract: Power transformers play a key role in power and electrical industries and thus boosting their efficiency is necessary. In this study, the effect of oxidized multi-walled carbon nanotubes on transformer oil thermophysical properties was experimentally investigated. The maximum amount of carbon nanotubes was chosen up to 0.01 mass% to assure the maximum purity of transformer oil. Heat transfer characteristics of transformer oil and nanofluids in two cases of free and forced convection were studied. Breakdown voltage, flash point, pour point, density, electrical and thermal conductivities, viscosity and shear stress, as eight important quality parameters, were determined. According to the experimental results, the Breakdown voltage decreased through concentration increasing. Electrical conductivity is not changed considerable with increasing concentration and temperature. Thermal conductivity of nanofluids and transformer oil changed with increasing temperature and concentration. Furthermore, at all concentrations and temperatures, the viscosity of the nanofluids was lower than that of transformer oil.
108 citations
TL;DR: In this article, the effect of doping eutectic binary salt solvent with Al2O3 nanoparticles on its specific heat capacity was investigated, using both differential scanning calorimetry measurements and molecular dynamics simulations.
107 citations
References
More filters
Book•
01 Jan 1985
TL;DR: In this article, the physical concepts and methodologies of heat and mass transfer are explained for advanced undergraduate engineering majors, using a systematic method for problem solving and discusses the relationship of heat transfer to many important practical applications through examples and problems.
Abstract: This book, designed for advanced undergraduate engineering majors, explains the physical concepts and methodologies of heat and mass transfer. It uses a systematic method for problem solving and discusses the relationship of heat and mass transfer to many important practical applications through examples and problems. A and significant contribution is the extensive use of the First Law of thermodynamics.
4,113 citations
TL;DR: In this article, the authors used a Brookfield rotating viscometer to measure the viscosities of the dispersed fluids with γ-alumina (Al2O3) and titanium dioxide (TiO2) particles at a 10% volume concentration.
Abstract: Turbulent friction and heat transfer behaviors of dispersed fluids (i.e., uttrafine metallic oxide particles suspended in water) in a circular pipe were investigated experimentally. Viscosity measurements were also conducted using a Brookfield rotating viscometer. Two different metallic oxide particles, γ-alumina (Al2O3) and titanium dioxide (TiO2), with mean diameters of 13 and 27 nm, respectively, were used as suspended particles. The Reynolds and Prandtl numbers varied in the ranges l04-I05 and 6.5-12.3, respectively. The viscosities of the dispersed fluids with γ-Al2O3 and TiO2 particles at a 10% volume concentration were approximately 200 and 3 times greater than that of water, respectively. These viscosity results were significantly larger than the predictions from the classical theory of suspension rheology. Darcy friction factors for the dispersed fluids of the volume concentration ranging from 1% to 3% coincided well with Kays' correlation for turbulent flow of a single-phase fluid. The Nusselt n...
3,730 citations
3,019 citations
"Investigation on Convective Heat Tr..." refers background in this paper
...Hamilton and Crasser (1962) have developed a more elaborate model for the effective thermal conductivity of twocomponent mixtures as a function of the conductivity of the pure materials, the composition of the mixture, and the shape of the dispersed particles....
[...]
TL;DR: In this paper, a transient hot-wire method was used to measure the thermal conductivity of a small amount of nanoparticles and the experimental results showed that these nanoparticles have substantially higher thermal conductivities than the same liquids without nanoparticles.
Abstract: Oxide nanofluids were produced and their thermal conductivities were measured by a transient hot-wire method. The experimental results show that these nanofluids, containing a small amount of nanoparticles, have substantially higher thermal conductivities than the same liquids without nanoparticles. Comparisons between experiments and the Hamilton and Crosser model show that the model can predict the thermal conductivity of nanofluids containing large agglomerated Al{sub 2}O{sub 3} particles. However, the model appears to be inadequate for nanofluids containing CuO particles. This suggests that not only particle shape but size is considered to be dominant in enhancing the thermal conductivity of nanofluids.
2,811 citations
TL;DR: In this article, the authors proposed two different approaches for deriving heat transfer correlation of the nanofluid, and investigated the mechanism of heat transfer enhancement of the nano-fluid.
2,355 citations