Investigation on Convective Heat Transfer and Flow Features of Nanofluids
01 Feb 2003-Journal of Heat Transfer-transactions of The Asme (American Society of Mechanical Engineers)-Vol. 125, Iss: 1, pp 151-155
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
Citations
More filters
TL;DR: In this article, the authors used thermal conductivity and viscosity data that consider temperature property dependence and nanoparticle size to evaluate the effect of increasing the volume fraction of nanoparticles on the average Nusselt number.
Abstract: Heat transfer enhancement in horizontal annuli using variable thermal conductivity and variable viscosity of CuO-water nanofluid is investigated numerically. The base case of simulation used thermal conductivity and viscosity data that consider temperature property dependence and nanoparticle size. It was observed that for Ra≥ 10 4 , the average Nusselt number was deteriorated by increasing the volume fraction of nanoparticles. However, for Ra =10 3 , the average Nusselt number enhancement depends on aspect ratio of the annulus as well as volume fraction of nanoparticles. Also, for Ra = 10 3 , the average Nusselt number was less sensitive to volume fraction of nanoparticles at high aspect ratio and the average Nusselt number increased by increasing the volume fraction of nanoaprticles for aspect ratios ≤0.4. For Ra≥ 10 4 , the Nusselt number was deteriorated everywhere around the cylinder surface especially at high aspect ratio. However, this reduction is only restricted to certain regions around the cylinder surface for Ra = 10 3 . For Ra ≥ 10 4 , the Maxwell―Garnett and the Chon et al. conductivity models demonstrated similar results. But, there was a deviation in the prediction at Ra = 10 3 and this deviation becomes more significant at high volume fraction of nanoparticles. The Nguyen et al. data and the Brinkman model give completely different predictions,for Ra≥10 4 , where the difference in prediction of the Nusselt number reached 50%. However, this difference was less than 10% at Ra =10 3 .
95 citations
TL;DR: In this paper, the laminar axisymmetric flow of nanofluid over a non-linearly stretching sheet is reported, which contains the simultaneous effects of Brownian motion and thermophoretic diffusion of nanoparticles.
Abstract: This article reports the laminar axisymmetric flow of nanofluid over a non-linearly stretching sheet. The model used for nanofluid contains the simultaneous effects of Brownian motion and thermophoretic diffusion of nanoparticles. The recently proposed boundary condition is considered which requires the mass flux of nanoparticles at the wall to be zero. Analytic solutions of the arising boundary value problem are obtained by optimal homotopy analysis method. Moreover the numerical solutions are computed by Keller–Box method. Both the solutions are found in excellent agreement. The behavior of Brownian motion on the fluid temperature and wall heat transfer rate is insignificant. Further the nanoparticle volume fraction distribution is found to be negative near the vicinity of the stretching sheet.
95 citations
TL;DR: In this paper, the effects of the inner to outer diameter ratio, thermal boundary conditions on the fully developed Nusselt number have been investigated and anomalous heat transfer enhancement has been captured for the case of the heated outer wall with the inner wall insulated.
95 citations
TL;DR: In this article, the effect of magnetic parameters and Biot number on the temperature and nanoparticles in the presence of a constant applied magnetic field was investigated. And the resulting nonlinear system has been solved for the velocities, temperature and particle concentration distributions.
95 citations
TL;DR: In this article, an experimental study was carried out to investigate heat transfer and friction factor characteristics of γ-Al 2 O 3 /water nanofluid through circular tube with twisted tape inserts with various thicknesses at constant heat flux.
94 citations
References
More filters
Book•
01 Jan 1985
TL;DR: In this article, the physical concepts and methodologies of heat and mass transfer are explained for advanced undergraduate engineering majors, using a systematic method for problem solving and discusses the relationship of heat transfer to many important practical applications through examples and problems.
Abstract: This book, designed for advanced undergraduate engineering majors, explains the physical concepts and methodologies of heat and mass transfer. It uses a systematic method for problem solving and discusses the relationship of heat and mass transfer to many important practical applications through examples and problems. A and significant contribution is the extensive use of the First Law of thermodynamics.
4,113 citations
TL;DR: In this article, the authors used a Brookfield rotating viscometer to measure the viscosities of the dispersed fluids with γ-alumina (Al2O3) and titanium dioxide (TiO2) particles at a 10% volume concentration.
Abstract: Turbulent friction and heat transfer behaviors of dispersed fluids (i.e., uttrafine metallic oxide particles suspended in water) in a circular pipe were investigated experimentally. Viscosity measurements were also conducted using a Brookfield rotating viscometer. Two different metallic oxide particles, γ-alumina (Al2O3) and titanium dioxide (TiO2), with mean diameters of 13 and 27 nm, respectively, were used as suspended particles. The Reynolds and Prandtl numbers varied in the ranges l04-I05 and 6.5-12.3, respectively. The viscosities of the dispersed fluids with γ-Al2O3 and TiO2 particles at a 10% volume concentration were approximately 200 and 3 times greater than that of water, respectively. These viscosity results were significantly larger than the predictions from the classical theory of suspension rheology. Darcy friction factors for the dispersed fluids of the volume concentration ranging from 1% to 3% coincided well with Kays' correlation for turbulent flow of a single-phase fluid. The Nusselt n...
3,730 citations
3,019 citations
"Investigation on Convective Heat Tr..." refers background in this paper
...Hamilton and Crasser (1962) have developed a more elaborate model for the effective thermal conductivity of twocomponent mixtures as a function of the conductivity of the pure materials, the composition of the mixture, and the shape of the dispersed particles....
[...]
TL;DR: In this paper, a transient hot-wire method was used to measure the thermal conductivity of a small amount of nanoparticles and the experimental results showed that these nanoparticles have substantially higher thermal conductivities than the same liquids without nanoparticles.
Abstract: Oxide nanofluids were produced and their thermal conductivities were measured by a transient hot-wire method. The experimental results show that these nanofluids, containing a small amount of nanoparticles, have substantially higher thermal conductivities than the same liquids without nanoparticles. Comparisons between experiments and the Hamilton and Crosser model show that the model can predict the thermal conductivity of nanofluids containing large agglomerated Al{sub 2}O{sub 3} particles. However, the model appears to be inadequate for nanofluids containing CuO particles. This suggests that not only particle shape but size is considered to be dominant in enhancing the thermal conductivity of nanofluids.
2,811 citations
TL;DR: In this article, the authors proposed two different approaches for deriving heat transfer correlation of the nanofluid, and investigated the mechanism of heat transfer enhancement of the nano-fluid.
2,355 citations