Investigation on Convective Heat Transfer and Flow Features of Nanofluids
01 Feb 2003-Journal of Heat Transfer-transactions of The Asme (American Society of Mechanical Engineers)-Vol. 125, Iss: 1, pp 151-155
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
Citations
More filters
TL;DR: In this article, the authors designed a serpentine-channel cold plate as cooling unit of fluid battery thermal management system (BTMS), and a parameterized U-tube representing a part of serpentine channel in cold plate was created.
78 citations
18 Sep 2012
TL;DR: In this paper, a non-linear regression equation for the estimation of thermal conductivity and viscosity of water-based nanofluids is proposed. And the results show that the equation is able to predict the thermal conductivities and visco-sensitivity of different types of nanofl fluids of different particle diameters closely.
Abstract: The thermo-physical properties of nanofluids such as thermal conductivity, viscosity, density and specific heat of nanofluids are required for the analysis of convection heat transfer coefficients. The density and specific heat of nanofluids can be estimated with the mixture relations in literature. Information regarding the properties at different volume concentration and temperature is required for the estimation of heat transfer coefficient. The two most fundamental properties which are, experimentally, determined, are viscosity and thermal conductivity. Investigators have been determining the properties of nanofluids at different temperatures and base liquids. The present work is an attempt to analyze the available data to develop a non-linear regression equation for the estimation of thermal conductivity and viscosity of water based nanofluids. In the present study, nanofluids are considered as a homogenous medium and the parameters influencing the thermo physical properties identified. Equations are developed for the analysis of thermo-physical properties of nanofluids as a function of parameters viz., material, concentration, temperature and particle size useful for designer. The opposing nature of thermal conductivity rise and viscosity decrease with temperature; dependence of nanofluid thermal conductivity on material properties alters the range of applicability of nanofluids for heat transfer applications. The thermal conductivity and viscosity of Al2O3, ZnO and TiO2 dispersed in water are measured to validate the proposed equations. The result shows that the equations are able to predict the thermal conductivity and viscosity of different types of nanofluids of different particle diameters closely.
78 citations
TL;DR: In this paper, the effects of viscous dissipation and thermophoresis were reduced into the system of nonlinear ordinary differential equations and the existence of dual solutions for various pertinent parameters in certain domain with the critical value of suction (0, s c s ) and stretching/shrinking parameter ( χ c χ ).
78 citations
TL;DR: In this article, the thermal performance of a cylindrical copper mesh wick heat pipe using water-based CuO nanofluids was analyzed and the results showed that the deposition of CuO nanoparticles creates a thin coating layer on the wick surfaces in the evaporator section.
78 citations
TL;DR: In this article, Tiron was used as a dispersant to enhance the thermal conductivity of non-spherical CuO nanoparticles at 28°C and 55°C respectively.
78 citations
References
More filters
Book•
01 Jan 1985
TL;DR: In this article, the physical concepts and methodologies of heat and mass transfer are explained for advanced undergraduate engineering majors, using a systematic method for problem solving and discusses the relationship of heat transfer to many important practical applications through examples and problems.
Abstract: This book, designed for advanced undergraduate engineering majors, explains the physical concepts and methodologies of heat and mass transfer. It uses a systematic method for problem solving and discusses the relationship of heat and mass transfer to many important practical applications through examples and problems. A and significant contribution is the extensive use of the First Law of thermodynamics.
4,113 citations
TL;DR: In this article, the authors used a Brookfield rotating viscometer to measure the viscosities of the dispersed fluids with γ-alumina (Al2O3) and titanium dioxide (TiO2) particles at a 10% volume concentration.
Abstract: Turbulent friction and heat transfer behaviors of dispersed fluids (i.e., uttrafine metallic oxide particles suspended in water) in a circular pipe were investigated experimentally. Viscosity measurements were also conducted using a Brookfield rotating viscometer. Two different metallic oxide particles, γ-alumina (Al2O3) and titanium dioxide (TiO2), with mean diameters of 13 and 27 nm, respectively, were used as suspended particles. The Reynolds and Prandtl numbers varied in the ranges l04-I05 and 6.5-12.3, respectively. The viscosities of the dispersed fluids with γ-Al2O3 and TiO2 particles at a 10% volume concentration were approximately 200 and 3 times greater than that of water, respectively. These viscosity results were significantly larger than the predictions from the classical theory of suspension rheology. Darcy friction factors for the dispersed fluids of the volume concentration ranging from 1% to 3% coincided well with Kays' correlation for turbulent flow of a single-phase fluid. The Nusselt n...
3,730 citations
3,019 citations
"Investigation on Convective Heat Tr..." refers background in this paper
...Hamilton and Crasser (1962) have developed a more elaborate model for the effective thermal conductivity of twocomponent mixtures as a function of the conductivity of the pure materials, the composition of the mixture, and the shape of the dispersed particles....
[...]
TL;DR: In this paper, a transient hot-wire method was used to measure the thermal conductivity of a small amount of nanoparticles and the experimental results showed that these nanoparticles have substantially higher thermal conductivities than the same liquids without nanoparticles.
Abstract: Oxide nanofluids were produced and their thermal conductivities were measured by a transient hot-wire method. The experimental results show that these nanofluids, containing a small amount of nanoparticles, have substantially higher thermal conductivities than the same liquids without nanoparticles. Comparisons between experiments and the Hamilton and Crosser model show that the model can predict the thermal conductivity of nanofluids containing large agglomerated Al{sub 2}O{sub 3} particles. However, the model appears to be inadequate for nanofluids containing CuO particles. This suggests that not only particle shape but size is considered to be dominant in enhancing the thermal conductivity of nanofluids.
2,811 citations
TL;DR: In this article, the authors proposed two different approaches for deriving heat transfer correlation of the nanofluid, and investigated the mechanism of heat transfer enhancement of the nano-fluid.
2,355 citations