scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Investigation on Convective Heat Transfer and Flow Features of Nanofluids

01 Feb 2003-Journal of Heat Transfer-transactions of The Asme (American Society of Mechanical Engineers)-Vol. 125, Iss: 1, pp 151-155
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI
TL;DR: In this article, a numerical study of natural convection flow and heat transfer of Copper (Cu)-water nanofluid inside an eccentric horizontal annulus is presented, where inner and outer cylinders are kept at constant temperatures as Th and Tc, respectively.

71 citations

Journal ArticleDOI
01 Jan 2020-Heliyon
TL;DR: This theoretical investigation deals with the utilization of bioconvection phenomenon in flow of tangent hyperbolic nanofluid over an accelerated moving surface and the implications of promising parameters on velocity profile, temperature profile, nanoparticles volume fraction and microorganisms profile are evaluated.

71 citations

Journal ArticleDOI
TL;DR: In this article, the thermal performance of alumina nano-fluids during the quenching process of a surface at the boiling condition was investigated, which can be a good answer to the controversial results available in the nanofluid related literature.
Abstract: This paper focuses on the thermal performance of alumina nano-fluids during the quenching process of a surface at the boiling condition, which can be a good answer to the controversial results available in the nano-fluid related literature. For this purpose, an experimental study is conducted to investigate the potential application of alumina/water nano-fluid for cooling a stainless steel rod under the flow boiling heat transfer mechanism. Nano-fluids are prepared by dispersing the 5, 50 and 80nm alumina nanoparticles into the deionized water. The experimental facility provides conditions to quantify the heat transfer coefficient in forced convection and nucleate boiling heat transfer domains at different operating conditions. In terms of operating time, the experiments are divided into two domains namely short time study and extended time study. For the short time study (0-60 minutes of study with neglecting the role of time on the deposition of nanoparticles) enhancement of heat transfer coefficient is reported for all nano-fluids, however for nano-fluid with smaller nanoparticle size, higher thermal performance is registered. In extended time study (60-1000 minutes) heat transfer coefficient is found to be considerably deteriorated for all nano-fluids. This work demonstrates that the reason for deterioration of heat transfer coefficient is referred to the surface roughness, nanoparticle size, static contact angle and thermal fouling resistance parameters. These four parameters are simultaneously determinative factors, which strongly control the thermal behaviour of nano-fluids over the extended time and are the exact reasons for the controversies raised in the literature.

71 citations


Cites background from "Investigation on Convective Heat Tr..."

  • ...Such fluids can be a promising way for improving the heat transfer rate and heat dissipation in heat exchanging media [2-9]....

    [...]

Journal ArticleDOI
TL;DR: In this paper, the forced convective heat transfer for flow of water and aqueous nanofluids inside a microchannel was studied experimentally for the constant wall temperature boundary condition.

71 citations

Journal ArticleDOI
TL;DR: In this paper, an experimental study was performed to investigate the operation characteristics of a cylindrical miniature grooved heat pipe using aqueous CuO nanofluid as the working fluid at some steady cooling conditions.

71 citations

References
More filters
Book
01 Jan 1985
TL;DR: In this article, the physical concepts and methodologies of heat and mass transfer are explained for advanced undergraduate engineering majors, using a systematic method for problem solving and discusses the relationship of heat transfer to many important practical applications through examples and problems.
Abstract: This book, designed for advanced undergraduate engineering majors, explains the physical concepts and methodologies of heat and mass transfer. It uses a systematic method for problem solving and discusses the relationship of heat and mass transfer to many important practical applications through examples and problems. A and significant contribution is the extensive use of the First Law of thermodynamics.

4,113 citations

Journal ArticleDOI
TL;DR: In this article, the authors used a Brookfield rotating viscometer to measure the viscosities of the dispersed fluids with γ-alumina (Al2O3) and titanium dioxide (TiO2) particles at a 10% volume concentration.
Abstract: Turbulent friction and heat transfer behaviors of dispersed fluids (i.e., uttrafine metallic oxide particles suspended in water) in a circular pipe were investigated experimentally. Viscosity measurements were also conducted using a Brookfield rotating viscometer. Two different metallic oxide particles, γ-alumina (Al2O3) and titanium dioxide (TiO2), with mean diameters of 13 and 27 nm, respectively, were used as suspended particles. The Reynolds and Prandtl numbers varied in the ranges l04-I05 and 6.5-12.3, respectively. The viscosities of the dispersed fluids with γ-Al2O3 and TiO2 particles at a 10% volume concentration were approximately 200 and 3 times greater than that of water, respectively. These viscosity results were significantly larger than the predictions from the classical theory of suspension rheology. Darcy friction factors for the dispersed fluids of the volume concentration ranging from 1% to 3% coincided well with Kays' correlation for turbulent flow of a single-phase fluid. The Nusselt n...

3,730 citations

Journal ArticleDOI

3,019 citations


"Investigation on Convective Heat Tr..." refers background in this paper

  • ...Hamilton and Crasser (1962) have developed a more elaborate model for the effective thermal conductivity of twocomponent mixtures as a function of the conductivity of the pure materials, the composition of the mixture, and the shape of the dispersed particles....

    [...]

Journal ArticleDOI
TL;DR: In this paper, a transient hot-wire method was used to measure the thermal conductivity of a small amount of nanoparticles and the experimental results showed that these nanoparticles have substantially higher thermal conductivities than the same liquids without nanoparticles.
Abstract: Oxide nanofluids were produced and their thermal conductivities were measured by a transient hot-wire method. The experimental results show that these nanofluids, containing a small amount of nanoparticles, have substantially higher thermal conductivities than the same liquids without nanoparticles. Comparisons between experiments and the Hamilton and Crosser model show that the model can predict the thermal conductivity of nanofluids containing large agglomerated Al{sub 2}O{sub 3} particles. However, the model appears to be inadequate for nanofluids containing CuO particles. This suggests that not only particle shape but size is considered to be dominant in enhancing the thermal conductivity of nanofluids.

2,811 citations

Journal ArticleDOI
TL;DR: In this article, the authors proposed two different approaches for deriving heat transfer correlation of the nanofluid, and investigated the mechanism of heat transfer enhancement of the nano-fluid.

2,355 citations