Investigation on Convective Heat Transfer and Flow Features of Nanofluids
01 Feb 2003-Journal of Heat Transfer-transactions of The Asme (American Society of Mechanical Engineers)-Vol. 125, Iss: 1, pp 151-155
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
Citations
More filters
TL;DR: In this article, a numerical study is conducted to investigate the transport mechanism of mixed convection in a lid-driven enclosure filled with nanofluids, where two vertical walls of the enclosure are insulated while the horizontal walls are kept at constant temperatures with the top surface moving at a constant speed.
236 citations
TL;DR: In this paper, the effect of the use of a nanofluid in a miniature plate heat exchanger (PHE) with modulated surface has been studied both experimentally and numerically.
235 citations
TL;DR: It was demonstrated that the viscosity of water-based nanofluids can be significantly decreased by pH of the suspension independently from the thermal conductivity, and optimum directions in nan ofluid development are suggested.
Abstract: The effect of average particle sizes on basic macroscopic properties and heat transfer performance of alpha-SiC/water nanofluids was investigated. The average particle sizes, calculated from the specific surface area of nanoparticles, were varied from 16 to 90 nm. Nanofluids with larger particles of the same material and volume concentration provide higher thermal conductivity and lower viscosity increases than those with smaller particles because of the smaller solid/liquid interfacial area of larger particles. It was also demonstrated that the viscosity of water-based nanofluids can be significantly decreased by pH of the suspension independently from the thermal conductivity. Heat transfer coefficients were measured and compared to the performance of base fluids as well as to nanofluids reported in the literature. Criteria for evaluation of the heat transfer performance of nanofluids are discussed and optimum directions in nanofluid development are suggested.
234 citations
TL;DR: In this paper, the steady mixed convection boundary layer flow past a vertical flat plate embedded in a porous medium filled with nanofluids is studied using different types of nanoparticles as Cu (cuprom), Al2O3 (aluminium), and TiO2 (titanium)
234 citations
TL;DR: In this paper, the authors show that the presence of nanoparticles enhances thermal conduction under macroscopically static conditions mainly due to nanoparticle structuring / networking, while the natural convective heat transfer coefficient decreases systematically with increasing nanoparticle concentration, and the deterioration is partially attributed to the high viscosity of nanofluids.
Abstract: This paper summarises some of our recent work on the heat transfer of nanofluids (dilute liquid suspensions of nanoparticles). It covers heat conduction, convective heat transfer under both natural and forced flow conditions, and boiling heat transfer in the nucleate regime. The results show that, despite considerable data scattering, the presence of nanoparticles enhances thermal conduction under macroscopically static conditions mainly due to nanoparticle structuring / networking. The natural convective heat transfer coefficient is observed to decrease systematically with increasing nanoparticle concentration, and the deterioration is partially attributed to the high viscosity of nanofluids. However, either enhancement or deterioration of convective heat transfer is observed under the forced flow conditions and particle migration is suggested to be an important mechanism. The results also show that the boiling heat transfer is enhanced in the nucleate regime for both alumina and titania nanofluids, and the enhancement is more sensitive to the concentration change for TiO(2) nanofluids. It is concluded that there is still some way to go before we can tailor-make nanofluids for any targeted applications.
233 citations
Cites background from "Investigation on Convective Heat Tr..."
...Most of the reported studies show the enhancement of convective heat transfer by using nanofluids (Lee and Choi 1996; Xuan and Roetzel 2000; Li and Xuan 2002; Xuan and Li 2003; Jang and Choi 2006; Heris 2007)....
[...]
References
More filters
Book•
01 Jan 1985
TL;DR: In this article, the physical concepts and methodologies of heat and mass transfer are explained for advanced undergraduate engineering majors, using a systematic method for problem solving and discusses the relationship of heat transfer to many important practical applications through examples and problems.
Abstract: This book, designed for advanced undergraduate engineering majors, explains the physical concepts and methodologies of heat and mass transfer. It uses a systematic method for problem solving and discusses the relationship of heat and mass transfer to many important practical applications through examples and problems. A and significant contribution is the extensive use of the First Law of thermodynamics.
4,113 citations
TL;DR: In this article, the authors used a Brookfield rotating viscometer to measure the viscosities of the dispersed fluids with γ-alumina (Al2O3) and titanium dioxide (TiO2) particles at a 10% volume concentration.
Abstract: Turbulent friction and heat transfer behaviors of dispersed fluids (i.e., uttrafine metallic oxide particles suspended in water) in a circular pipe were investigated experimentally. Viscosity measurements were also conducted using a Brookfield rotating viscometer. Two different metallic oxide particles, γ-alumina (Al2O3) and titanium dioxide (TiO2), with mean diameters of 13 and 27 nm, respectively, were used as suspended particles. The Reynolds and Prandtl numbers varied in the ranges l04-I05 and 6.5-12.3, respectively. The viscosities of the dispersed fluids with γ-Al2O3 and TiO2 particles at a 10% volume concentration were approximately 200 and 3 times greater than that of water, respectively. These viscosity results were significantly larger than the predictions from the classical theory of suspension rheology. Darcy friction factors for the dispersed fluids of the volume concentration ranging from 1% to 3% coincided well with Kays' correlation for turbulent flow of a single-phase fluid. The Nusselt n...
3,730 citations
3,019 citations
"Investigation on Convective Heat Tr..." refers background in this paper
...Hamilton and Crasser (1962) have developed a more elaborate model for the effective thermal conductivity of twocomponent mixtures as a function of the conductivity of the pure materials, the composition of the mixture, and the shape of the dispersed particles....
[...]
TL;DR: In this paper, a transient hot-wire method was used to measure the thermal conductivity of a small amount of nanoparticles and the experimental results showed that these nanoparticles have substantially higher thermal conductivities than the same liquids without nanoparticles.
Abstract: Oxide nanofluids were produced and their thermal conductivities were measured by a transient hot-wire method. The experimental results show that these nanofluids, containing a small amount of nanoparticles, have substantially higher thermal conductivities than the same liquids without nanoparticles. Comparisons between experiments and the Hamilton and Crosser model show that the model can predict the thermal conductivity of nanofluids containing large agglomerated Al{sub 2}O{sub 3} particles. However, the model appears to be inadequate for nanofluids containing CuO particles. This suggests that not only particle shape but size is considered to be dominant in enhancing the thermal conductivity of nanofluids.
2,811 citations
TL;DR: In this article, the authors proposed two different approaches for deriving heat transfer correlation of the nanofluid, and investigated the mechanism of heat transfer enhancement of the nano-fluid.
2,355 citations