Laminated magnetic graphene with enhanced electromagnetic wave absorption properties
01 Jan 2013-Journal of Materials Chemistry C (The Royal Society of Chemistry)-Vol. 1, Iss: 4, pp 765-777
TL;DR: In this paper, the authors reported a facile solvothermal route to synthesize laminated magnetic graphene and showed that there have significant changes in the electromagnetic properties of magnetic graphene when compared with pure graphene.
Abstract: Graphene is highly desirable as an electromagnetic wave absorber because of its high dielectric loss and low density. Nevertheless, pure graphene is found to be non-magnetic and contributes to microwave energy absorption mostly because of its dielectric loss, and the electromagnetic parameters of pure graphene, which are out of balance, result in a bad impedance matching characteristic. In this paper, we report a facile solvothermal route to synthesize laminated magnetic graphene. The results show that there have been significant changes in the electromagnetic properties of magnetic graphene when compared with pure graphene. Especially the dielectric Cole–Cole semicircle suggests that there are Debye relaxation processes in the laminated magnetic graphene, which prove beneficial to enhance the dielectric loss. We also proposed an electromagnetic complementary theory to explain how laminated magnetic graphene, with the combined advantages of graphene and magnetic particles, helps to improve the standard of impedance matching for electromagnetic wave absorbing materials. Besides, microwave absorption properties indicate that the reflection loss of the as-prepared composite is below −10 dB (90% absorption) at 10.4–13.2 GHz with a coating layer thickness of 2.0 mm. This further confirms that the nanoscale surface modification of magnetic particles on graphene makes graphene-based composites have a certain research value in electromagnetic wave absorption.
Citations
More filters
TL;DR: A review of the state-of-the-art research in the design and characterization of polymer/carbon based composites as EMI shielding materials can be found in this paper.
Abstract: The extensive development of electronic systems and telecommunications has lead to major concerns regarding electromagnetic pollution. Motivated by environmental questions and by a wide variety of applications, the quest for materials with high efficiency to mitigate electromagnetic interferences (EMI) pollution has become a mainstream field of research. This paper reviews the state-of-the-art research in the design and characterization of polymer/carbon based composites as EMI shielding materials. After a brief introduction, in Section 1, the electromagnetic theory will be briefly discussed in Section 2 setting the foundations of the strategies to be employed to design efficient EMI shielding materials. These materials will be classified in the next section by the type of carbon fillers, involving carbon black, carbon fiber, carbon nanotubes and graphene. The importance of the dispersion method into the polymer matrix (melt-blending, solution processing, etc.) on the final material properties will be discussed. The combination of carbon fillers with other constituents such as metallic nanoparticles or conductive polymers will be the topic of Section 4. The final section will address advanced complex architectures that are currently studied to improve the performances of EMI materials and, in some cases, to impart additional properties such as thermal management and mechanical resistance. In all these studies, we will discuss the efficiency of the composites/devices to absorb and/or reflect the EMI radiation.
949 citations
TL;DR: The results indicated that the RGO/MnFe2O4/PVDF composites show the most excellent wave absorption properties, and the wave absorbing mechanism can be attributed to the dielectric loss, magnetic loss and the synergetic effect between RGO+Mn Fe 2O4, RGO-PV DF and MnFe2 O4+PvDF.
Abstract: MnFe2O4 nanoparticles have been synthesized on a large scale by a simple hydrothermal process in a wild condition, and the RGO/MnFe2O4 nanocomposites were also prepared under ultrasonic treatment based on the synthesized nanoparticles. The absorption properties of MnFe2O4/wax, RGO/MnFe2O4/wax and the RGO/MnFe2O4/PVDF (polyvinylidene fluoride) composites were studied; the results indicated that the RGO/MnFe2O4/PVDF composites show the most excellent wave absorption properties. The minimum reflection loss of RGO/MnFe2O4/PVDF composites with filler content of 5 wt % can reach −29.0 dB at 9.2 GHz, and the bandwidth of frequency less than −10 dB is from 8.00 to 12.88 GHz. The wave absorbing mechanism can be attributed to the dielectric loss, magnetic loss and the synergetic effect between RGO+MnFe2O4, RGO+PVDF and MnFe2O4+PVDF.
653 citations
TL;DR: In this article, the authors introduce the theory of microwave absorption and summarize recent advances in the fabrication of graphene-based MAMs, including rational design of the microstructure of pure graphene and tunable chemical integrations with polymers, magnetic metals, ferrites, ceramics, and multicomponents composites.
Abstract: With the rapid arising of information technology, microwave absorbing materials (MAMs) are playing an increasingly significant role in electronic reliability, healthcare, and national defense security. Hence, development of high performance MAMs with thin thickness, low density, wide bandwidth, and strong absorption has attracted great interests. Recently, taking graphene as MAMs for high-performance electromagnetic (EM) wave attenuation has grabbed considerable attention, owing to their low density, high specific surface area, strong dielectric loss, and high electronic conductivity. Furthermore, in order to address the interfacial impedance mismatching of the sole graphene materials, incorporation of other lossy materials has been widely studied as the imperative solution to improve its MA performance. In this review, we introduce the theory of microwave absorption and summarize recent advances in the fabrication of graphene-based MAMs, including rational design of the microstructure of pure graphene and tunable chemical integrations with polymers, magnetic metals, ferrites, ceramics, and multicomponents composites. The key point of enhancing MA in graphene-based MAMs is to regulate their EM properties, improve of impedance matching, and create diversified loss mechanisms. Furthermore, the shortcomings, challenges, and prospects of graphene-based MAMs are also put forward, which will be helpful to people working in the related fields.
535 citations
TL;DR: This technique is fast, highly reproducible, and scalable, which may facilitate the commercialization of such composite foams and generalize the use of them as EMI shielding materials in the fields of spacecraft and aircraft.
Abstract: Novel high-performance polyetherimide (PEI)/graphene@Fe3O4 (G@Fe3O4) composite foams with flexible character and low density of about 0.28–0.4 g/cm3 have been developed by using a phase separation method. The obtained PEI/G@Fe3O4 foam with G@Fe3O4 loading of 10 wt % exhibited excellent specific EMI shielding effectiveness (EMI SE) of ∼41.5 dB/(g/cm3) at 8–12 GHz. Moreover, most the applied microwave was verified to be absorbed rather than being reflected back, resulting from the improved impedance matching, electromagnetic wave attenuation, as well as multiple reflections. Meanwhile, the resulting foams also possessed a superparamagnetic behavior and low thermal conductiviy of 0.042–0.071 W/(m K). This technique is fast, highly reproducible, and scalable, which may facilitate the commercialization of such composite foams and generalize the use of them as EMI shielding materials in the fields of spacecraft and aircraft.
525 citations
References
More filters
26,456 citations
TL;DR: Raman spectra are reported from single crystals of graphite and other graphite materials as mentioned in this paper, and the Raman intensity of this band is inversely proportional to the crystallite size and is caused by a breakdown of the k-selection rule.
Abstract: Raman spectra are reported from single crystals of graphite and other graphite materials. Single crystals of graphite show one single line at 1575 cm−1. For the other materials like stress‐annealed pyrolitic graphite, commercial graphites, activated charcoal, lampblack, and vitreous carbon another line is detected at 1355 cm−1. The Raman intensity of this band is inversely proportional to the crystallite size and is caused by a breakdown of the k‐selection rule. The intensity of this band allows an estimate of the crystallite size in the surface layer of any carbon sample. Two in‐plane force constants are calculated from the frequencies.
9,373 citations
TL;DR: In this paper, it was shown that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphene's surface.
Abstract: The ultimate aim of any detection method is to achieve such a level of sensitivity that individual quanta of a measured entity can be resolved. In the case of chemical sensors, the quantum is one atom or molecule. Such resolution has so far been beyond the reach of any detection technique, including solid-state gas sensors hailed for their exceptional sensitivity1, 2, 3, 4. The fundamental reason limiting the resolution of such sensors is fluctuations due to thermal motion of charges and defects5, which lead to intrinsic noise exceeding the sought-after signal from individual molecules, usually by many orders of magnitude. Here, we show that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphene's surface. The adsorbed molecules change the local carrier concentration in graphene one by one electron, which leads to step-like changes in resistance. The achieved sensitivity is due to the fact that graphene is an exceptionally low-noise material electronically, which makes it a promising candidate not only for chemical detectors but also for other applications where local probes sensitive to external charge, magnetic field or mechanical strain are required.
7,318 citations
TL;DR: Monodisperse samples of silver nanocubes were synthesized in large quantities by reducing silver nitrate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP), characterized by a slightly truncated shape bounded by {100, {110}, and {111} facets.
Abstract: Monodisperse samples of silver nanocubes were synthesized in large quantities by reducing silver nitrate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP). These cubes were single crystals and were characterized by a slightly truncated shape bounded by {100}, {110}, and {111} facets. The presence of PVP and its molar ratio (in terms of repeating unit) relative to silver nitrate both played important roles in determining the geometric shape and size of the product. The silver cubes could serve as sacrificial templates to generate single-crystalline nanoboxes of gold: hollow polyhedra bounded by six {100} and eight {111} facets. Controlling the size, shape, and structure of metal nanoparticles is technologically important because of the strong correlation between these parameters and optical, electrical, and catalytic properties.
5,992 citations
TL;DR: In this paper, it was shown that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphenes surface.
Abstract: The ultimate aspiration of any detection method is to achieve such a level of sensitivity that individual quanta of a measured value can be resolved. In the case of chemical sensors, the quantum is one atom or molecule. Such resolution has so far been beyond the reach of any detection technique, including solid-state gas sensors hailed for their exceptional sensitivity. The fundamental reason limiting the resolution of such sensors is fluctuations due to thermal motion of charges and defects which lead to intrinsic noise exceeding the sought-after signal from individual molecules, usually by many orders of magnitude. Here we show that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphenes surface. The adsorbed molecules change the local carrier concentration in graphene one by one electron, which leads to step-like changes in resistance. The achieved sensitivity is due to the fact that graphene is an exceptionally low-noise material electronically, which makes it a promising candidate not only for chemical detectors but also for other applications where local probes sensitive to external charge, magnetic field or mechanical strain are required.
5,510 citations