Large-scale and low-cost synthesis of single-walled carbon nanotubes by the catalytic pyrolysis of hydrocarbons
TL;DR: In this article, a large scale and low-cost method for the synthesis of single-walled carbon nanotubes (SWNTs) using an improved floating catalyst method was proposed.
Abstract: Rope-like bundles of single-walled carbon nanotubes (SWNTs) similar to those obtained by laser vaporization and electric-are techniques were synthesized on a relatively large scale and at low cost by the catalytic decomposition of hydrocarbons at a temperature of about 1200 degrees C using an improved floating catalyst method. The SWNTs thus obtained have larger diameters and are self-organized into ropes. The addition of thiophene was found to be effective in promoting the growth of SWNTs and in increasing the yield of either SWNTs or multiwalled carbon nanotubes under different growth conditions. (C) 1998 American Institute of Physics. [S0003-6951(98)01125-5].
Citations
More filters
TL;DR: In this paper, single-walled carbon nanotubes (SWNTs) have been produced in a gas-phase catalytic process, where catalysts for SWNT growth form in situ by thermal decomposition of iron pentacarbonyl in a heated flow of carbon monoxide at pressures of 1-10 atm and temperatures of 800-1200°C.
1,812 citations
TL;DR: In this paper, the authors focus on the important role and challenges of high-k polymer-matrix composites (PMC) in new technologies and discuss potential applications of highk PMC.
1,412 citations
TL;DR: Carbon nanotubes have been shown to be useful for miniaturized electronic, mechanical, electromechanical, chemical and scanning probe devices and materials for macroscopic composites.
1,256 citations
Cites methods from "Large-scale and low-cost synthesis ..."
...Cheng and coworkers reported a method that employs benzene as the carbon feedstock, hydrogen as the carrier gas, and ferrocene as the catalyst precursor for SWNT growth [25]....
[...]
TL;DR: In this paper, a patterned layer of randomly oriented or partially aligned carbon nanotubes, such as one or more interconnected SWNT networks, is used to provide a semiconductor channel exhibiting improved electronic properties relative to conventional nanotube-based electronic systems.
Abstract: The present invention provides device components geometries and fabrication strategies for enhancing the electronic performance of electronic devices based on thin films of randomly oriented or partially aligned semiconducting nanotubes. In certain aspects, devices and methods of the present invention incorporate a patterned layer of randomly oriented or partially aligned carbon nanotubes, such as one or more interconnected SWNT networks, providing a semiconductor channel exhibiting improved electronic properties relative to conventional nanotubes-based electronic systems.
1,081 citations
TL;DR: In this article, the synthesis of high quality single-walled carbon nanotubes (SWNTs) is accomplished by optimizing the chemical compositions and textural properties of the catalyst material used in the chemical vapor deposition (CVD) of methane.
Abstract: The synthesis of bulk amounts of high quality single-walled carbon nanotubes (SWNTs) is accomplished by optimizing the chemical compositions and textural properties of the catalyst material used in the chemical vapor deposition (CVD) of methane A series of catalysts are derived by systematically varying the catalytic metal compounds and support materials The optimized catalysts consist of Fe/Mo bimetallic species supported on a novel silica−alumina multicomponent material The high SWNT yielding catalyst exhibits high surface-area and large mesopore volume at elevated temperatures Gram quantities of SWNT materials have been synthesized in ∼05 h using the optimized catalyst material The nanotube material consists of individual and bundled SWNTs that are free of defects and amorphous carbon coating This work represents a step forward toward obtaining kilogram scale perfect SWNT materials via simple CVD routes
1,046 citations
References
More filters
NEC1
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Abstract: THE synthesis of molecular carbon structures in the form of C60 and other fullerenes1 has stimulated intense interest in the structures accessible to graphitic carbon sheets. Here I report the preparation of a new type of finite carbon structure consisting of needle-like tubes. Produced using an arc-discharge evaporation method similar to that used for fullerene synthesis, the needles grow at the negative end of the electrode used for the arc discharge. Electron microscopy reveals that each needle comprises coaxial tubes of graphitic sheets, ranging in number from 2 up to about 50. On each tube the carbon-atom hexagons are arranged in a helical fashion about the needle axis. The helical pitch varies from needle to needle and from tube to tube within a single needle. It appears that this helical structure may aid the growth process. The formation of these needles, ranging from a few to a few tens of nanometres in diameter, suggests that engineering of carbon structures should be possible on scales considerably greater than those relevant to the fullerenes. On 7 November 1991, Sumio Iijima announced in Nature the preparation of nanometre-size, needle-like tubes of carbon — now familiar as 'nanotubes'. Used in microelectronic circuitry and microscopy, and as a tool to test quantum mechanics and model biological systems, nanotubes seem to have unlimited potential.
39,086 citations
NEC1
TL;DR: In this article, the authors reported the synthesis of abundant single-shell tubes with diameters of about one nanometre, whereas the multi-shell nanotubes are formed on the carbon cathode.
Abstract: CARBON nanotubes1 are expected to have a wide variety of interesting properties. Capillarity in open tubes has already been demonstrated2–5, while predictions regarding their electronic structure6–8 and mechanical strength9 remain to be tested. To examine the properties of these structures, one needs tubes with well defined morphologies, length, thickness and a number of concentric shells; but the normal carbon-arc synthesis10,11 yields a range of tube types. In particular, most calculations have been concerned with single-shell tubes, whereas the carbon-arc synthesis produces almost entirely multi-shell tubes. Here we report the synthesis of abundant single-shell tubes with diameters of about one nanometre. Whereas the multi-shell nanotubes are formed on the carbon cathode, these single-shell tubes grow in the gas phase. Electron diffraction from a single tube allows us to confirm the helical arrangement of carbon hexagons deduced previously for multi-shell tubes1.
8,018 citations
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Abstract: The major part of this chapter has already appeared in [1], but because of the length restrictions (in Science), the discussion on why we think this form is given in only brief detail. This chapter goes into more depth to try to answer the questions of why the fullerenes form themselves. This is another example of the very special behavior of carbon. From a chemist’s standpoint, it is carbon’s ability to form multiple bonds that allows it to make these low dimensional forms rather than to produce tetrahedral forms. Carbon can readily accomplish this and it is in the mathematics and physics of the way this universe was put together, that carbon is given this property. One of the consequences of this property is that, if left to its own devices as carbon condenses from the vapor and if the temperature range is just right, above 1000°C, but lower than 1400°C, there is an efficient self-assembly process whose endpoint is C60.
5,215 citations
Book•
01 Jan 1996
TL;DR: In this paper, the authors present a detailed overview of the properties of Fullerenes and their properties in surface science applications, such as scanning tunnel microscopy, growth and fragmentation studies, and chemical synthesis.
Abstract: Historical Introduction. Carbon Materials. Structure of Fullerenes. Symmetry Considerations. Growth and Fragmentation Studies. Crystalline Structure of Fullerenes. Synthesis of Fullerene Molecules and Solids. Doping of Fullerenes. Structure of Doped Fullerenes and Fullerene Compounds. Fullerene Chemistry. Vibrational Modes. Thermal Properties. Electronic Structure. Optical Properties. Electrical and Thermal Properties. Superconductivity. Nuclear Magnetic Resonance Studies. Electron Paramagnetic Resonance. Surface Science Techniques on Fullerenes. Magnetic Properties. Fullerene-Related Tubules and Spherules. Scanning Tunnel Microscopy. Applications.
4,008 citations
IBM1
TL;DR: In this paper, it was shown that covaporizing carbon and cobalt in an arc generator leads to the formation of carbon nanotubes which all have very small diameters (about 1.2 nm) and walls only a single atomic layer thick.
Abstract: CARBON exhibits a unique ability to form a wide range of structures. In an inert atmosphere it condenses to form hollow, spheroidal fullerenes. Carbon deposited on the hot tip of the cathode of the arc-discharge apparatus used for bulk fullerene synthesis will form nested graphitic tubes and polyhedral particles. Electron irradiation of these nanotubes and polyhedra transforms them into nearly spherical carbon 'onions'. We now report that covaporizing carbon and cobalt in an arc generator leads to the formation of carbon nanotubes which all have very small diameters (about 1.2 nm) and walls only a single atomic layer thick. The tubes form a web-like deposit woven through the fullerene-containing soot, giving it a rubbery texture. The uniformity and single-layer structure of these nanotubes should make it possible to test their properties against theoretical predictions.
3,758 citations