Large-scale production of single-walled carbon nanotubes by the electric-arc technique
TL;DR: In this article, it was shown that the growth mechanism for SWNTs must be independent of the details of the technique used to make them, and that the ready availability of large amounts of SWNT can make them much more accessible for further study.
Abstract: Single-walled carbon nanotubes (SWNTs) offer the prospect of both new fundamental science and useful (nano)technological applications1. High yields (70–90%) of SWNTs close-packed in bundles can be produced by laser ablation of carbon targets2. The electric-arc technique used to generate fullerenes and multi-walled nanotubes is cheaper and easier to implement, but previously has led to only low yields of SWNTs3,4. Here we show that this technique can generate large quantities of SWNTs with similar characteristics to those obtained by laser ablation. This suggests that the (still unknown) growth mechanism for SWNTs must be independent of the details of the technique used to make them. The ready availability of large amounts of SWNTs, meanwhile, should make them much more accessible for further study.
Citations
More filters
TL;DR: A review of recent advances in carbon nanotubes and their composites can be found in this article, where the authors examine the research work reported in the literature on the structure and processing of carbon Nanotubes.
4,709 citations
Cites background or methods from "Large-scale production of single-wa..."
...Primary synthesis methods for single and multi-walled carbon nanotubes include arc-discharge [1,15], laser ablation [16], gas-phase catalytic growth from carbon monoxide [17], and chemical vapor deposition (CVD) from hydrocarbons [18–20] methods....
[...]
...The single walled nanotubes produced by laser ablation and arc-discharge techniques have a greater tendency to form ‘ropes’ or aligned bundles [15,23]....
[...]
...[15] Journet C, Maser WK, Bernier P, Loiseau A, de la Chapelle ML, Lefrant S, et al....
[...]
TL;DR: Arc-synthesized single-walled carbon nanotubes have been purified through preparative electrophoresis in agarose gel and glass bead matrixes and promise to be interesting nanomaterials in their own right.
Abstract: Arc-synthesized single-walled carbon nanotubes have been purified through preparative electrophoresis in agarose gel and glass bead matrixes. Two major impurities were isolated: fluorescent carbon and short tubular carbon. Analysis of these two classes of impurities was done. The methods described may be readily extended to the separation of other water-soluble nanoparticles. The separated fluorescent carbon and short tubule carbon species promise to be interesting nanomaterials in their own right.
3,357 citations
TL;DR: In this paper, a review of nitrogen-doped graphene is presented, including various synthesis methods to introduce N doping and various characterization techniques for the examination of various N bonding configurations.
Abstract: Nitrogen doping has been an effective way to tailor the properties of graphene and render its potential use for various applications. Three common bonding configurations are normally obtained when doping nitrogen into the graphene: pyridinic N, pyrrolic N, and graphitic N. This paper reviews nitrogen-doped graphene, including various synthesis methods to introduce N doping and various characterization techniques for the examination of various N bonding configurations. Potential applications of N-graphene are also reviewed on the basis of experimental and theoretical studies.
3,075 citations
3,052 citations
TL;DR: Large panels of aligned carbon nanotubes can be made under conditions that are suitable for device fabrication under plasma-enhanced hot filament chemical vapor deposition.
Abstract: Free-standing aligned carbon nanotubes have previously been grown above 700°C on mesoporous silica embedded with iron nanoparticles. Here, carbon nanotubes aligned over areas up to several square centimeters were grown on nickel-coated glass below 666°C by plasma-enhanced hot filament chemical vapor deposition. Acetylene gas was used as the carbon source and ammonia gas was used as a catalyst and dilution gas. Nanotubes with controllable diameters from 20 to 400 nanometers and lengths from 0.1 to 50 micrometers were obtained. Using this method, large panels of aligned carbon nanotubes can be made under conditions that are suitable for device fabrication.
2,530 citations
References
More filters
NEC1
TL;DR: In this article, the authors reported the synthesis of abundant single-shell tubes with diameters of about one nanometre, whereas the multi-shell nanotubes are formed on the carbon cathode.
Abstract: CARBON nanotubes1 are expected to have a wide variety of interesting properties. Capillarity in open tubes has already been demonstrated2–5, while predictions regarding their electronic structure6–8 and mechanical strength9 remain to be tested. To examine the properties of these structures, one needs tubes with well defined morphologies, length, thickness and a number of concentric shells; but the normal carbon-arc synthesis10,11 yields a range of tube types. In particular, most calculations have been concerned with single-shell tubes, whereas the carbon-arc synthesis produces almost entirely multi-shell tubes. Here we report the synthesis of abundant single-shell tubes with diameters of about one nanometre. Whereas the multi-shell nanotubes are formed on the carbon cathode, these single-shell tubes grow in the gas phase. Electron diffraction from a single tube allows us to confirm the helical arrangement of carbon hexagons deduced previously for multi-shell tubes1.
8,018 citations
"Large-scale production of single-wa..." refers methods in this paper
...The electric-arc technique used to generate fullerenes and multi-walled nanotubes is cheaper and easier to implement, but previously has led to only low yields of SWNT...
[...]
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Abstract: The major part of this chapter has already appeared in [1], but because of the length restrictions (in Science), the discussion on why we think this form is given in only brief detail. This chapter goes into more depth to try to answer the questions of why the fullerenes form themselves. This is another example of the very special behavior of carbon. From a chemist’s standpoint, it is carbon’s ability to form multiple bonds that allows it to make these low dimensional forms rather than to produce tetrahedral forms. Carbon can readily accomplish this and it is in the mathematics and physics of the way this universe was put together, that carbon is given this property. One of the consequences of this property is that, if left to its own devices as carbon condenses from the vapor and if the temperature range is just right, above 1000°C, but lower than 1400°C, there is an efficient self-assembly process whose endpoint is C60.
5,215 citations
"Large-scale production of single-wa..." refers background in this paper
...High yields (70–90%) of SWNTs close-packed in bundles can be produced by laser ablation of carbon target...
[...]
Book•
01 Jan 1996
TL;DR: In this paper, the authors present a detailed overview of the properties of Fullerenes and their properties in surface science applications, such as scanning tunnel microscopy, growth and fragmentation studies, and chemical synthesis.
Abstract: Historical Introduction. Carbon Materials. Structure of Fullerenes. Symmetry Considerations. Growth and Fragmentation Studies. Crystalline Structure of Fullerenes. Synthesis of Fullerene Molecules and Solids. Doping of Fullerenes. Structure of Doped Fullerenes and Fullerene Compounds. Fullerene Chemistry. Vibrational Modes. Thermal Properties. Electronic Structure. Optical Properties. Electrical and Thermal Properties. Superconductivity. Nuclear Magnetic Resonance Studies. Electron Paramagnetic Resonance. Surface Science Techniques on Fullerenes. Magnetic Properties. Fullerene-Related Tubules and Spherules. Scanning Tunnel Microscopy. Applications.
4,008 citations
IBM1
TL;DR: In this paper, it was shown that covaporizing carbon and cobalt in an arc generator leads to the formation of carbon nanotubes which all have very small diameters (about 1.2 nm) and walls only a single atomic layer thick.
Abstract: CARBON exhibits a unique ability to form a wide range of structures. In an inert atmosphere it condenses to form hollow, spheroidal fullerenes. Carbon deposited on the hot tip of the cathode of the arc-discharge apparatus used for bulk fullerene synthesis will form nested graphitic tubes and polyhedral particles. Electron irradiation of these nanotubes and polyhedra transforms them into nearly spherical carbon 'onions'. We now report that covaporizing carbon and cobalt in an arc generator leads to the formation of carbon nanotubes which all have very small diameters (about 1.2 nm) and walls only a single atomic layer thick. The tubes form a web-like deposit woven through the fullerene-containing soot, giving it a rubbery texture. The uniformity and single-layer structure of these nanotubes should make it possible to test their properties against theoretical predictions.
3,758 citations
TL;DR: In this paper, the Raman spectra of single wall carbon nanotubes (SWNTs) were studied using laser excitation wavelengths in the range from 514.5 to 1320 nanometers.
Abstract: Single wall carbon nanotubes (SWNTs) that are found as close-packed arrays in crystalline ropes have been studied by using Raman scattering techniques with laser excitation wavelengths in the range from 514.5 to 1320 nanometers. Numerous Raman peaks were observed and identified with vibrational modes of armchair symmetry (n, n) SWNTs. The Raman spectra are in good agreement with lattice dynamics calculations based on C-C force constants used to fit the two-dimensional, experimental phonon dispersion of a single graphene sheet. Calculated intensities from a nonresonant, bond polarizability model optimized for sp2 carbon are also in qualitative agreement with the Raman data, although a resonant Raman scattering process is also taking place. This resonance results from the one-dimensional quantum confinement of the electrons in the nanotube.
1,882 citations