LTE-advanced: next-generation wireless broadband technology [Invited Paper]
TL;DR: An overview of the techniques being considered for LTE Release 10 (aka LTEAdvanced) is discussed, which includes bandwidth extension via carrier aggregation to support deployment bandwidths up to 100 MHz, downlink spatial multiplexing including single-cell multi-user multiple-input multiple-output transmission and coordinated multi point transmission, and heterogeneous networks with emphasis on Type 1 and Type 2 relays.
Abstract: LTE Release 8 is one of the primary broadband technologies based on OFDM, which is currently being commercialized. LTE Release 8, which is mainly deployed in a macro/microcell layout, provides improved system capacity and coverage, high peak data rates, low latency, reduced operating costs, multi-antenna support, flexible bandwidth operation and seamless integration with existing systems. LTE-Advanced (also known as LTE Release 10) significantly enhances the existing LTE Release 8 and supports much higher peak rates, higher throughput and coverage, and lower latencies, resulting in a better user experience. Additionally, LTE Release 10 will support heterogeneous deployments where low-power nodes comprising picocells, femtocells, relays, remote radio heads, and so on are placed in a macrocell layout. The LTE-Advanced features enable one to meet or exceed IMT-Advanced requirements. It may also be noted that LTE Release 9 provides some minor enhancement to LTE Release 8 with respect to the air interface, and includes features like dual-layer beamforming and time-difference- of-arrival-based location techniques. In this article an overview of the techniques being considered for LTE Release 10 (aka LTEAdvanced) is discussed. This includes bandwidth extension via carrier aggregation to support deployment bandwidths up to 100 MHz, downlink spatial multiplexing including single-cell multi-user multiple-input multiple-output transmission and coordinated multi point transmission, uplink spatial multiplexing including extension to four-layer MIMO, and heterogeneous networks with emphasis on Type 1 and Type 2 relays. Finally, the performance of LTEAdvanced using IMT-A scenarios is presented and compared against IMT-A targets for full buffer and bursty traffic model.
Citations
More filters
TL;DR: This article has implemented TBCC algorithm using Bit by Bit (BYB) and Look Up Table (LUT) approaches on Freescale StarCore SC140 based DSP platform and proposed an efficient algorithm implementation methodology by comparing the machine cycles and memory requirement.
Abstract: Fourth Generation (4G) mobile communication system uses Orthogonal Frequency Division Multiplexing (OFDM). With this technique, high data rate demands are achieved. Tail biting Convolution Coding (TBCC) avoids the data rate loss, hence it is widely used error control coding algorithm in OFDM and other various wireless communication technologies. But, OFDM has increased Peak to Average Power Ratio (PAPR). High PAPR signal consumes more power and makes system power inefficient. To gain supercomputing performance in terms of Speed, Memory and Power on mobile devices, an efficient implementation of algorithms on Digital Signal Processing (DSP) processor is an essential requirement. This requirement becomes more stringent for Fifth Generation (5G) mobile devices. For this, wide scope of knowledge as well as skills are required to understand the algorithm, DSP architecture, instruction set, optimization and performance measurement. In this article, we have implemented TBCC algorithm using Bit by Bit (BYB) and Look Up Table (LUT) approaches on Freescale StarCore SC140 based DSP platform and proposed an efficient algorithm implementation methodology by comparing the machine cycles and memory requirement. We have used coding rate (R) = 1/2, 1/3, 1/4 and constraint length (K) = 5 and K = 9 for implementation of TBCC. Using our proposed LUT approach, we have achieved average 45.82% Computational Complexity Reduction Ratio (CCRR) in machine cycles compared to BYB approach. Proposed LUT approach increases the TBCC execution speed. Our developed fixed point routines can be used for any K ≤ 9. TBCC is also analyzed for PAPR to get an overall profiling results and three dimensional optimization of TBCC algorithm in terms of Speed, Memory and Power.
2 citations
Dissertation•
01 Jan 2014
TL;DR: The overhead in implementing cooperation, particularly the overhead to estimate the channels, select the relay(s), and coordinate the transmissions, is investigated, and the spectral and energy efficiencies of several different relaying schemes are studied.
Abstract: Cooperative communications has been shown to be effective in combating fading in wireless channels. In order to realize the potential benefits promised by cooperative communications in practical wireless networks, careful cross-layer design is essential. In particular, investigations of the interactions among the physical, link, and network layers are critical in developing cooperation-enabled MAC or routing protocols. Recently, cross-layer design for cooperative networks has become a very active research area; many efficient and elegant cooperative networking techniques that provide significant performance gains have been proposed. Cooperation, however, also introduces new challenges, including increased overhead and interference, that must be addressed in order to efficiently implement cooperative networks. Although cooperation is promising in improving performance, it requires much more overhead to implement compared with conventional point-topoint communications. In addition, with cooperation, the interference environment will change; this means that new interference management techniques are required. In this dissertation, we focus on the overhead-performance trade-off and interference management for wireless cooperative networks. The overhead in implementing cooperation, particularly the overhead to estimate the channels, select the relay(s), and coordinate the transmissions, is investigated. Taking into account the overhead, the spectral and energy efficiencies of several different relaying schemes are studied. Through analyses and simulations, we demonstrate the impact of the overhead on these efficiencies, and provide guidelines for determining the appropriate cooperative scheme for specific applications.
2 citations
Cites background from "LTE-advanced: next-generation wirel..."
...2 Efficient Heterogeneous Cooperative Networks To accommodate the rapidly growing data traffic in cellular networks, heterogeneous cellular networks have been introduced as a key feature of the LTE-Advanced standard [129], providing the next performance and capacity leap....
[...]
2 citations
TL;DR: Simulation results are presented to validate the performance of the proposed algorithm where the results are compared with the existing works in literature as well as with a sub-optimal power optimization solution.
Abstract: In this paper, we consider an orthogonal frequency division multiplexing based device to device network. The communication between source and destination is facilitated by a dual-hop transmission under amplify and forward relaying protocol. The sum throughput of the system is maximized with joint optimization over power allocation at each transmitting node and sub-carrier pairing over two hops. A dual decomposition based solution is proposed subject to separate transmit power constraint at each node. Simulation results are presented to validate the performance of the proposed algorithm where the results are compared with the existing works in literature as well as with a sub-optimal power optimization solution.
2 citations
TL;DR: An efficient downlink radio resource management scheme is proposed in this paper by combining the coordinated multipoint transmission and reception technique along with carrier aggregation technique to achieve higher throughput for the cell-edge user and better overall performance.
Abstract: Long Term Evolution-Advanced (LTE-A) offers several new technologies to improve the performance of the user. However, poor received signal and interference from adjacent cells in the cell-edge area can reduce the efficiency of using individual technology. Therefore, the cell-edge users have lower throughput compared to the other users in the cell and LTE-A standard. An efficient downlink radio resource management scheme is proposed in this paper by combining the coordinated multipoint transmission and reception technique along with carrier aggregation technique to achieve higher throughput for the cell-edge user and better overall performance. The proposed method jointly transmits multiple component carriers to the cell-edge user from different cells to increase the bandwidth, strengthen the received signal, and reduce the interference while it satisfies several constraints. Modified largest weighted delay first packet scheduling algorithm is deployed for resource allocation, which takes into account the delay parameters, the probability of packet loss, and data rates of the user. The obtained system-level simulation results show that the proposed method significantly enhances the throughput performances, spectral efficiency, and fairness index, compared with the existing conventional methods.
2 citations
References
More filters
01 Sep 2006
TL;DR: A preliminary look at the air interface for Evolved UTRA (E-UTRA) and associated key technologies required to reach its design objectives are provided.
Abstract: With the emergence of packet-based wireless broadband systems such as 802.16e, it is evident that a comprehensive evolution of the universal mobile telecommunications system specifications is required to remain competitive. As a result, work has begun on long term evolution (LTE) of the UMTS terrestrial radio access and radio access network aimed for commercial deployment in 2010. Goals for the evolved system include support for improved system capacity and coverage, high peak data rates, low latency, reduced operating costs, multi-antenna support, flexible bandwidth operations and seamless integration with existing systems. To reach these goals, a new design for the air interface is envisioned. This paper provides a preliminary look at the air interface for Evolved UTRA (E-UTRA) and associated key technologies required to reach its design objectives. Initial E-UTRA system performance results show a 2 to 3x improvement over a reference Rel-6 UMTS system configuration [1, 2] for both uplink and downlink.
30 citations
24 Oct 2008
TL;DR: The proposed channel estimation technique is shown to have significant gains in performance compared to other well known channel estimation techniques such as the maximum-likelihood (ML) and the inverse fast Fourier transform (IFFT) channel estimation methods.
Abstract: The performance of the uplink physical channel of the 3GPP LTE system is considered in this paper. Assuming a single user spatial division multiple access transmission scheme, where users' signals are transmitted over different subcarriers, a low complexity channel estimation technique is proposed for the physical uplink shared channel (PUSCH). The proposed channel estimation technique is shown to have significant gains in performance compared to other well known channel estimation techniques such as the maximum-likelihood (ML) and the inverse fast Fourier transform (IFFT) channel estimation methods [5]. Simulation results for different channel models and modulation and coding schemes (MCS) using incremental redundancy (IR) based hybrid automatic repeat request (HARQ) operation are also shown. Finally, a robust detection scheme is proposed for the physical uplink control channel (PUCCH) and simulation results are summarized.
10 citations
"LTE-advanced: next-generation wirel..." refers methods in this paper
...The DFT precoding operation is performed to reduce the cubic metric (CM) of the signal, leading to higher maximum transmit power [2]....
[...]