Journal ArticleDOI
Machinability of nickel-base super alloys: a general review
Reads0
Chats0
TLDR
In this article, a general review of their material characteristics and properties together with their machinability assessment when using different cutting tools is presented, and the advantages and disadvantages of different tool materials with regard to the machining Inconel are highlighted.About:
This article is published in Journal of Materials Processing Technology.The article was published on 1998-05-01. It has received 536 citations till now. The article focuses on the topics: Machinability & Inconel.read more
Citations
More filters
Journal ArticleDOI
An overview of the machinability of aeroengine alloys
TL;DR: In this paper, the authors proposed a method for machining aeroengine alloys with improved hardness, such as cubic boron nitride (CBN) tools, for high speed continuous machining.
Journal ArticleDOI
State-of-the-art in surface integrity in machining of nickel-based super alloys
A. Thakur,S. Gangopadhyay +1 more
TL;DR: In this article, the state-of-the-art on various surface integrity characteristics during machining of nickel-based super alloys are presented, including surface roughness, defects (surface cavities, metal debris, plucking, smeared material, redeposited material, cracked carbide particles, feed marks, grooves and laps).
Journal ArticleDOI
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
TL;DR: In this paper, the minimum quantity cooling lubrication (MQCL) system which combines the advantages of the cryogenic air and MQL, can improve the machinability of Inconel 718.
Journal ArticleDOI
Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review
TL;DR: In this paper, the applicability of vegetable oil-based metalworking fluids in machining of ferrous metals has been investigated and its performances with respect to the cutting force, surface finish of work piece, tool wear and temperature at the cutting zone have been investigated.
Journal ArticleDOI
Thermally enhanced machining of hard-to-machine materials: a review
TL;DR: In this paper, the up-to-date progress and benefits of thermally enhanced machining (with a focus on laser and plasma assistance) of ceramics, metals and metal matrix composites are summarized.
References
More filters
Journal Article
Development of SiC-whisker-reinforced ceramics
G.C. Wei,P.F. Becher +1 more
TL;DR: In this paper, powder-whisker mixtures were hot-pressed to obtain densification behavior of the composites, which was influenced by the temperature, pressing pressure, and whisker content.
Journal ArticleDOI
High-speed Machining of Inconel 718 with Ceramic Tools
TL;DR: In this article, high speed machining for Inconel 718 was carried out with SiC whisker reinforced alumina, silicon nitride and TiC added alumina ceramic tools.
Journal ArticleDOI
Tool Wear by Solution: A Quantitative Understanding
B. M. Kramer,Nam P. Suh +1 more
Journal ArticleDOI
On Shear Instability in Machining a Nickel-Iron Base Superalloy
R. Komanduri,T. A. Schroeder +1 more
Journal ArticleDOI
Use of ceramic tools for machining nickel based alloys
N. Richards,David K. Aspinwall +1 more
TL;DR: In this paper, the authors present the results of detailed machinability tests, involving a cross-section of current nitride, superhard and whisker reinforced ceramic tooling products, comprehensively reviewing existing literature on the subject.