Journal ArticleDOI
Machinability studies on boron carbide and graphite reinforced aluminium hybrid composites
Reads0
Chats0
TLDR
In this article, the effect of machining parameters on the thrust force, torque and burr height while drilling Al 2618, Al2618 with 10% boron carbide (B4C) and 5% graphite (Gr) hybrid composites is addressed.About:
This article is published in Materials Today: Proceedings.The article was published on 2021-01-01. It has received 8 citations till now. The article focuses on the topics: Machinability & Boron carbide.read more
Citations
More filters
Journal ArticleDOI
Experimental Investigation of the Friction Stir Weldability of AA8006 with Zirconia Particle Reinforcement and Optimized Process Parameters.
T. Sathish,Abdul Razak Kaladgi,Vinayagam Mohanavel,K. Arul,Asif Afzal,Abdul Aabid,Muneer Baig,B. Saleh +7 more
TL;DR: In this paper, the level of process parameters for the friction stir welding of AA8006 to reduce the variability by the trial-and-error experimental method, thereby reducing the number of samples needing to be characterized to optimize the process parameters.
Journal ArticleDOI
Nano TiC-Graphene-Cu composites fabrication by a modified ball-milling method followed by reactive sintering: Effects of reinforcements content on microstructure, consolidation, and mechanical properties
TL;DR: In this paper, a two-step mechanical milling followed by a reactive sintering process was used to synthesize Nano TiC-Graphene-Cu composites from a mixture of Cu, Ti, and Graphene powders in four different compositions, and effects of reinforcements content on the microstructure and mechanical properties were studied.
Journal ArticleDOI
Nano TiC-Graphene-Cu composites fabrication by a modified ball-milling method followed by reactive sintering: Effects of reinforcements content on microstructure, consolidation, and mechanical properties
TL;DR: In this paper , a two-step mechanical milling followed by a reactive sintering process was used to synthesize Nano TiC-Graphene-Cu composites from a mixture of Cu, Ti, and Graphene powders in four different compositions, and effects of reinforcements content on the microstructure and mechanical properties were studied.
Journal ArticleDOI
Microstructure, Mechanical and Tribological Properties of Al7075/SiC/Graphite Hybrid Metal Matrix Composites
Journal ArticleDOI
Microstructure, mechanical properties and wear behavior of Ni-coated continuous carbon fiber-reinforced A356 aluminum matrix composites fabricated by squeeze casting
TL;DR: In this article , aluminum matrix composites reinforced with continuous carbon fibers (CFs) were fabricated using A356 aluminum alloy and PAN-based CFs by squeeze casting and microstructure and mechanical properties were examined.
References
More filters
Journal ArticleDOI
Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC
TL;DR: In this paper, the effect of machining parameters, e.g., cutting speed, feed rate and depth of cut on tool wear and surface roughness was studied, and it was observed that increase of reinforcement element addition produced better mechanical properties such as impact toughness and hardness, but tensile strength showed different trend.
Journal ArticleDOI
A novel battery thermal management system using nano-enhanced phase change materials
TL;DR: In this article, the authors presented a novel modified battery module configuration employing two-layer nanoparticle enhanced phase change materials (nePCM), and compared the cooling performance of proposed battery thermal management systems (BTMS) at an ambient temperature ranging from 30°C to 40°C with external natural convection conditions.
Journal ArticleDOI
Graphene Reinforced Metal Matrix Composite (GRMMC): A Review
TL;DR: In this article, a wide-ranging overview on the state of the dispersion of graphene in composites, including materials already synthesized and characterization, is given, focusing on different dispersion methods, mechanism of strengthening, composites synthesized using graphene and its applications.
Journal ArticleDOI
The effect of ethanol–diesel–biodiesel blends on combustion, performance and emissions of a direct injection diesel engine
TL;DR: In this article, the authors examined the influence of the ethanol and RME addition to diesel fuel on start of injection, autoignition delay, combustion and maximum heat release rate, engine performance efficiency and emissions of the exhaust when operating over a wide range of loads and speeds.
Journal ArticleDOI
Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics
Manzoore Elahi M. Soudagar,M.A. Mujtaba,Mohammad Reza Safaei,Mohammad Reza Safaei,Mohammad Reza Safaei,Asif Afzal,Dhana Raju,Waqar Ahmed,Nagaraj R. Banapurmath,Nazia Hossain,Shahid Bashir,Irfan Anjum Badruddin,Irfan Anjum Badruddin,Marjan Goodarzi,Kiran Shahapurkar,Syed Noeman Taqui +15 more
TL;DR: In this paper, the performance and emission characteristics of a modified common rail direct injection (CRDI) diesel engine fueled by Ricinus communis biodiesel (RCME20), diesel (80%), and their blends with strontium-zinc oxide (Sr@ZnO) nanoparticle additives were evaluated.