scispace - formally typeset
Open AccessJournal ArticleDOI

Measurement of resistance curves in the longitudinal failure of composites using digital image correlation

Giuseppe Catalanotti, +4 more
- 15 Nov 2010 - 
- Vol. 70, Iss: 13, pp 1986-1993
Reads0
Chats0
TLDR
In this paper, the authors presented a new methodology to measure the crack resistance curves associated with fiberdominated failure modes in polymer-matrix composites, which is based on the identification of the crack tip location using Digital Image Correlation and the calculation of the J-integral directly from the test data using a simple expression derived for cross-ply composite laminates.
About: 
This article is published in Composites Science and Technology.The article was published on 2010-11-15 and is currently open access. It has received 175 citations till now. The article focuses on the topics: Digital image correlation & Composite laminates.

read more

Figures
Citations
More filters
Journal ArticleDOI

Measurement of the fracture toughness associated with the longitudinal fibre compressive failure mode of laminated composites

M.J. Laffan, +5 more
- 01 Nov 2012 - 
TL;DR: In this paper, the fracture toughness associated with the fiber compressive failure was obtained from testing notched unidirectional carbon/epoxy four-point-bend specimens and it was concluded that the most probable cause of the damage morphology was compression-induced shear failure of the composite.
Journal ArticleDOI

On the relation between the mode I fracture toughness of a composite laminate and that of a 0° ply: Analytical model and experimental validation

Pedro P. Camanho, +1 more
- 01 Aug 2011 - 
TL;DR: In this paper, a simple model was proposed to predict the fracture toughness of multidirectional carbon-epoxy composite laminates using the fracture-toughness of the 0° ply.
Journal ArticleDOI

Simulating drop-weight impact and compression after impact tests on composite laminates using conventional shell finite elements

E.V. González, +6 more
- 01 Jul 2018 - 
TL;DR: In this paper, a finite element modeling strategy is presented for simulating low-velocity impact and compression after impact tests on composite laminates using Abaqus/Explicit software.
Proceedings ArticleDOI

Continuum Damage Mechanics Models for the Analysis of Progressive Failure in Open-Hole Tension Laminates

Kyonchan Song, +2 more
TL;DR: In this article, an aligned mesh is proposed for analysis of the open-hole tension specimens consisting of different meshes within the individual plies, such that the element edges are aligned with the ply fiber direction.
Journal ArticleDOI

Experimental study on fracture and fatigue crack propagation processes in concrete based on DIC technology

Dongyang Li, +6 more
- 01 Aug 2020 - 
TL;DR: In this paper, a method to determine crack tip position and fracture process zone (FPZ) in concrete was proposed based on Bažant Crack Band Model (CBM) and digital image correlation (DIC) technique.
References
More filters
Journal ArticleDOI

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

James R. Rice
- 01 May 1967 - 
TL;DR: In this paper, an integral is exhibited which has the same value for all paths surrounding a class of notches in two-dimensional deformation fields of linear or non-linear elastic materials.
Journal ArticleDOI

Failure analysis of frp laminates by means of physically based phenomenological models

A. Puck, +1 more
- 01 Jul 1998 - 
TL;DR: In this article, the authors proposed fracture analysis of structural members made of FRP composites and derived the fracture angle which is the key for this evaluation, which is derived in the present paper.
Journal ArticleDOI

A damage model for the simulation of delamination in advanced composites under variable-mode loading

Albert Turon, +3 more
- 01 Nov 2006 - 
TL;DR: In this paper, a thermodynamically consistent damage model is proposed for the simulation of progressive delamination in composite materials under variable-mode ratio, and a constitutive equation is developed to model the initiation and propagation of delamination.
Journal ArticleDOI

Progressive damage modeling in fiber-reinforced materials

Ireneusz Lapczyk, +1 more
- 01 Nov 2007 - 
TL;DR: In this article, an anisotropic damage model suitable for predicting failure and post-failure behavior in fiber-reinforced materials is presented, which is intended to predict behavior of elastic-brittle materials that show no significant plastic deformation before failure.
Journal ArticleDOI

A continuum damage model for composite laminates: Part I - Constitutive model

Pere Maimí, +3 more
- 01 Oct 2007 - 
TL;DR: A continuum damage model for the prediction of the onset and evolution of intralaminar failure mechanisms and the collapse of structures manufactured in fiber-reinforced plastic laminates is proposed in this article.
Related Papers (5)

Fracture toughness of the tensile and compressive fibre failure modes in laminated composites

Silvestre T. Pinho, +2 more
- 01 Oct 2006 - 

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

James R. Rice
- 01 May 1967 - 

A continuum damage model for composite laminates: Part I - Constitutive model

Pere Maimí, +3 more
- 01 Oct 2007 - 

Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus

Malk Benzeggagh, +1 more
- 01 Jan 1996 - 

Crack band theory for fracture of concrete

Zdeněk P. Bažant, +1 more
Frequently Asked Questions (1)
Q1. What are the contributions in "Measurement of resistance curves in the longitudinal failure of composites using digital image correlation" ?

This paper presents a new methodology to measure the crack resistance curves associated with fiberdominated failure modes in polymer–matrix composites.