Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
18 Jul 2008-Science (American Association for the Advancement of Science)-Vol. 321, Iss: 5887, pp 385-388
TL;DR: Graphene is established as the strongest material ever measured, and atomically perfect nanoscale materials can be mechanically tested to deformations well beyond the linear regime.
Abstract: We measured the elastic properties and intrinsic breaking strength of free-standing monolayer graphene membranes by nanoindentation in an atomic force microscope. The force-displacement behavior is interpreted within a framework of nonlinear elastic stress-strain response, and yields second- and third-order elastic stiffnesses of 340 newtons per meter (N m(-1)) and -690 Nm(-1), respectively. The breaking strength is 42 N m(-1) and represents the intrinsic strength of a defect-free sheet. These quantities correspond to a Young's modulus of E = 1.0 terapascals, third-order elastic stiffness of D = -2.0 terapascals, and intrinsic strength of sigma(int) = 130 gigapascals for bulk graphite. These experiments establish graphene as the strongest material ever measured, and show that atomically perfect nanoscale materials can be mechanically tested to deformations well beyond the linear regime.
Citations
More filters
TL;DR: Be5C2 monolayer is a gapless semiconductor with a Dirac-like point in the band structure and also has an unusual negative Poisson's ratio and if synthesized, may find applications in electronics and mechanics.
Abstract: There is tremendous research into new materials with interesting topological properties. Here, the authors use density functional theory to design a two dimensional material pseudo-planar material in which each carbon atom is bonded to five beryllium atoms forming a quasi-planar pentacoordinate carbon moiety.
242 citations
TL;DR: The importance of surface properties in cell function is discussed, recent methods for surface modifications are systematically highlighted, and the impact of bulk material properties on the cellular responses is briefly reviewed.
Abstract: Surface interaction at the biomaterial–cell interface is essential for a variety of cellular functions, such as adhesion, proliferation, and differentiation. Nevertheless, changes in the biointerface enable to trigger specific cell signaling and result in different cellular responses. In order to manufacture biomaterials with higher functionality, biomaterials containing immobilized bioactive ligands have been widely introduced and employed for tissue engineering and regenerative medicine applications. Moreover, a number of physical and chemical strategies have been used to improve the functionality of biomaterials and specifically at the material interface. Here, the interactions between materials and cells at the interface levels are described. Then, the importance of surface properties in cell function is discussed and recent methods for surface modifications are systematically highlighted. Additionally, the impact of bulk material properties on the cellular responses is briefly reviewed.
242 citations
TL;DR: Graphene, reduced graphene oxide (rGO) and derived materials have emerged as promising solutions for applications in renewable energy storage/conversion devices as mentioned in this paper, which are known to simultaneously exhibit large specific surface area, high electrical conductivity, good chemical stability, high mechanical strength and flexibility.
242 citations
TL;DR: The overall recent progress made in developing MoS2 based flexible FETs, OLED displays, nonvolatile memory (NVM) devices, piezoelectric nanogenerators (PNGs), and sensors for wearable electronic and optoelectronic devices is discussed.
Abstract: Flexible, stretchable, and bendable materials, including inorganic semiconductors, organic polymers, graphene, and transition metal dichalcogenides (TMDs), are attracting great attention in such areas as wearable electronics, biomedical technologies, foldable displays, and wearable point-of-care biosensors for healthcare. Among a broad range of layered TMDs, atomically thin layered molybdenum disulfide (MoS2) has been of particular interest, due to its exceptional electronic properties, including tunable bandgap and charge carrier mobility. MoS2 atomic layers can be used as a channel or a gate dielectric for fabricating atomically thin field-effect transistors (FETs) for electronic and optoelectronic devices. This review briefly introduces the processing and spectroscopic characterization of large-area MoS2 atomically thin layers. The review summarizes the different strategies in enhancing the charge carrier mobility and switching speed of MoS2 FETs by integrating high-κ dielectrics, encapsulating layers, and other 2D van der Waals layered materials into flexible MoS2 device structures. The photoluminescence (PL) of MoS2 atomic layers has, after chemical treatment, been dramatically improved to near-unity quantum yield. Ultraflexible and wearable active-matrix organic light-emitting diode (AM-OLED) displays and wafer-scale flexible resistive random-access memory (RRAM) arrays have been assembled using flexible MoS2 transistors. The review discusses the overall recent progress made in developing MoS2 based flexible FETs, OLED displays, nonvolatile memory (NVM) devices, piezoelectric nanogenerators (PNGs), and sensors for wearable electronic and optoelectronic devices. Finally, it outlines the perspectives and tremendous opportunities offered by a large family of atomically thin-layered TMDs.
241 citations
TL;DR: A short, self-consistent vademecum which would be useful to researchers and engineers, since it focuses on the fundamentals of theory, materials, and readout-circuit design pertinent to the most recent developments in the field of piezoresistive sensors as mentioned in this paper.
Abstract: Sensors based on the detection of small resistance variations are universally recognized as piezoresistive. Being one of the simplest, most common and most investigated classes of sensors, continuous efforts are focused on creating improved devices with higher performance that can be used in many commercial and non–commercial applications (e.g. evaluation of strain, pressure, acceleration, force etc.). Consequently, despite the fact that more than 150 years have passed since the discovery of the piezoresistive effect in some classes of metals and semiconductors, the development of such sensors remains interesting and topical. Moreover, with the advent of second–generation robotics, research on piezoresistive sensors has undergone a massive increase. This paper aims to be a short, self–consistent vademecum which would be useful to researchers and engineers, since it focuses on the fundamentals of theory, materials, and readout–circuit design pertinent to the most recent developments in the field of piezoresistive sensors.
241 citations
References
More filters
TL;DR: This work shows that graphene's electronic structure is captured in its Raman spectrum that clearly evolves with the number of layers, and allows unambiguous, high-throughput, nondestructive identification of graphene layers, which is critically lacking in this emerging research area.
Abstract: Graphene is the two-dimensional building block for carbon allotropes of every other dimensionality We show that its electronic structure is captured in its Raman spectrum that clearly evolves with the number of layers The D peak second order changes in shape, width, and position for an increasing number of layers, reflecting the change in the electron bands via a double resonant Raman process The G peak slightly down-shifts This allows unambiguous, high-throughput, nondestructive identification of graphene layers, which is critically lacking in this emerging research area
13,474 citations
TL;DR: By using micromechanical cleavage, a variety of 2D crystals including single layers of boron nitride, graphite, several dichalcogenides, and complex oxides are prepared and studied.
Abstract: We report free-standing atomic crystals that are strictly 2D and can be viewed as individual atomic planes pulled out of bulk crystals or as unrolled single-wall nanotubes. By using micromechanical cleavage, we have prepared and studied a variety of 2D crystals including single layers of boron nitride, graphite, several dichalcogenides, and complex oxides. These atomically thin sheets (essentially gigantic 2D molecules unprotected from the immediate environment) are stable under ambient conditions, exhibit high crystal quality, and are continuous on a macroscopic scale.
10,586 citations
TL;DR: In this article, the authors investigated the effect of surface scratches on the mechanical strength of solids, and some general conclusions were reached which appear to have a direct bearing on the problem of rupture, from an engineering standpoint, and also on the larger question of the nature of intermolecular cohesion.
Abstract: In the course of an investigation of the effect of surface scratches on the mechanical strength of solids, some general conclusions were reached which appear to have a direct bearing on the problem of rupture, from an engineering standpoint, and also on the larger question of the nature of intermolecular cohesion. The original object of the work, which was carried out at the Royal Aircraft Establishment, was the discovery of the effect of surface treatment—such as, for instance, filing, grinding or polishing—on the strength of metallic machine parts subjected to alternating or repeated loads. In the case of steel, and some other metals in common use, the results of fatigue tests indicated that the range of alternating stress which could be permanently sustained by the material was smaller than the range within which it was sensibly elastic, after being subjected to a great number of reversals. Hence it was inferred that the safe range of loading of a part, having a scratched or grooved surface of a given type, should be capable of estimation with the help of one of the two hypotheses of rupture commonly used for solids which are elastic to fracture. According to these hypotheses rupture may be expected if (a) the maximum tensile stress, ( b ) the maximum extension, exceeds a certain critical value. Moreover, as the behaviour of the materials under consideration, within the safe range of alternating stress, shows very little departure from Hooke’s law, it was thought that the necessary stress and strain calculations could be performed by means of the mathematical theory of elasticity.
10,162 citations
Book•
01 Jan 1985
TL;DR: In this paper, the physical properties of crystals systematically in tensor notation are presented, presenting tensor properties in terms of their common mathematical basis and the thermodynamic relations between them.
Abstract: First published in 1957, this classic study has been reissued in a paperback version that includes an additional chapter bringing the material up to date. The author formulates the physical properties of crystals systematically in tensor notation, presenting tensor properties in terms of their common mathematical basis and the thermodynamic relations between them. The mathematical groundwork is laid in a discussion of tensors of the first and second ranks. Tensors of higher ranks and matrix methods are then introduced as natural developments of the theory. A similar pattern is followed in discussing thermodynamic and optical aspects.
8,520 citations
TL;DR: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope and a variety of structures were revealed, such as a nanotube ribbon, a wave pattern, and partial radial collapse.
Abstract: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a “nanostressing stage” located within a scanning electron microscope. The tensile-loading experiment was prepared and observed entirely within the microscope and was recorded on video. The MWCNTs broke in the outermost layer (“sword-in-sheath” failure), and the tensile strength of this layer ranged from 11 to 63 gigapascals for the set of 19 MWCNTs that were loaded. Analysis of the stress-strain curves for individual MWCNTs indicated that the Young's modulus E of the outermost layer varied from 270 to 950 gigapascals. Transmission electron microscopic examination of the broken nanotube fragments revealed a variety of structures, such as a nanotube ribbon, a wave pattern, and partial radial collapse.
5,011 citations