Journal ArticleDOI
Mechanical properties of blends of polycarbonate with unmodified and maleic anhydride grafted ABS
Reads0
Chats0
TLDR
Blends of polycarbonate/acrylonitrile-butadiene-styrene terpolymer (PC/ABS) and poly carbonate/maleic anhydride grafted ABS (PC andMABS) were prepared over the whole range of compositions using a single-screw extruder Tensile, flexural, notched Izod impact properties, and the heat deflection temperature of these blends were determined as mentioned in this paper.Abstract:
Blends of polycarbonate/acrylonitrile–butadiene–styrene terpolymer (PC/ABS) and polycarbonate/maleic anhydride grafted ABS (PC/MABS) were prepared over the whole range of compositions using a single-screw extruder Tensile, flexural, notched Izod impact properties, and the heat deflection temperature of these blends were determined Mechanical properties of PC/MABS blends are nearly equal to or higher than, those predicted by the rule of mixtures, whilst those of PC/ABS blends show nearly equal, or negative deviation, from the rule of mixtures The notched impact strength of PC/MABS blends shows a positive blending effect and proportionate increase from 25wt% PC to 75wt% PC Scanning electron micrographs were taken of etched surfaces of selective blends © 1998 SCIread more
Citations
More filters
Journal ArticleDOI
Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process
Vijay Tambrallimath,Ramaiah Keshavamurthy,D. Saravanabavan,Praveennath G. Koppad,G.S. Pradeep Kumar +4 more
TL;DR: In this article, a mixture of polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was used as filler material to increase the Young's modulus.
Journal ArticleDOI
Studies of ABS-graft-maleic anhydride/clay nanocomposites: Morphologies, thermal stability and flammability properties
TL;DR: ABS- g -MAH (maleic anhydride) with different grafting degree, ABS/OMT (organo montmorillonite) and ABS- g-MAH/OMTs were prepared via melt blending as mentioned in this paper.
Journal ArticleDOI
Effects of ABS-g-MAH on mechanical properties and compatibility of ABS/PC alloy
TL;DR: In this article, the effects of a compatibilizer, namely, an acrylonitrile-butadiene-styrene copolymer (ABS) grafted with maleic anhydrade (MAH), on the mechanical properties and morphology of an ABS/polycarbonate (PC) alloy were studied, and the results showed that a small quantity of ABS-g-MAH has a very good influence on the notched Izod impact strength of the ABS/PC alloy without compromising other properties such as the tensile strength, flexural strength, and
Journal ArticleDOI
Rheological and morphological behaviour of blends of polycarbonate with unmodified and maleic anhydride grafted ABS
TL;DR: In this article, a mixture of polycarbonate (PC) and maleic anhydride grafted ABS (MABS) was prepared by melt blending, using a single-screw extruder with a special mixing head over the whole range of compositions.
Journal ArticleDOI
Blends of recycled polycarbonate and acrylonitrile–butadiene–styrene: comparing the effect of reactive compatibilizers on mechanical and morphological properties
TL;DR: In this paper, a co-rotating twin-screw extruder was used for blending of recycled polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS) and some mechanical and morphological properties were investigated.
Related Papers (5)
Rheological and morphological behaviour of blends of polycarbonate with unmodified and maleic anhydride grafted ABS
Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends
Sie Chin Tjong,Yuezhong Meng +1 more