Microfibrillated cellulose and new nanocomposite materials: a review
TL;DR: In this article, a review summarizes progress in nanocellulose preparation with a particular focus on microfibrillated cellulose and also discusses recent developments in bio-nanocomposite fabrication based on nanocells.
Abstract: Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as promising candidates for bio-nanocomposite production. Such new high-value materials are the subject of continuing research and are commercially interesting in terms of new products from the pulp and paper industry and the agricultural sector. Cellulose nanofibers can be extracted from various plant sources and, although the mechanical separation of plant fibers into smaller elementary constituents has typically required high energy input, chemical and/or enzymatic fiber pre-treatments have been developed to overcome this problem. A challenge associated with using nanocellulose in composites is the lack of compatibility with hydrophobic polymers and various chemical modification methods have been explored in order to address this hurdle. This review summarizes progress in nanocellulose preparation with a particular focus on microfibrillated cellulose and also discusses recent developments in bio-nanocomposite fabrication based on nanocellulose.
Citations
More filters
TL;DR: This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them, and summarizes cellulOSE nanoparticles in terms of particle morphology, crystal structure, and properties.
Abstract: This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The methodology of composite processing and resulting properties are fully covered, with an emphasis on neat and high fraction cellulose composites. Additionally, advances in predictive modeling from molecular dynamic simulations of crystalline cellulose to the continuum modeling of composites made with such particles are reviewed (392 references).
4,920 citations
TL;DR: It is proposed to focus on the barrier properties of MFC used in films, in nanocomposites, or in paper coating to reduce the high energy consumption and produce new types of M FC materials on an industrial scale.
1,423 citations
TL;DR: In this article, a review of cellulose nanofibril based green composites research and application through examples is presented, where the authors discuss the processing, extraction, properties, chronological events and applications of celluloses and cellulosic-based nanocomposite materials.
1,267 citations
TL;DR: This review collocates current knowledge in the research and development of nanocelluloses and emphasizes more particularly on the chemical modification routes developed so far for their functionalization.
Abstract: Nanocelluloses, including nanocrystalline cellulose, nanofibrillated cellulose and bacterial cellulose nanofibers, have become fascinating building blocks for the design of new biomaterials. Derived from the must abundant and renewable biopolymer, they are drawing a tremendous level of attention, which certainly will continue to grow in the future driven by the sustainability trend. This growing interest is related to their unsurpassed quintessential physical and chemical properties. Yet, owing to their hydrophilic nature, their utilization is restricted to applications involving hydrophilic or polar media, which limits their exploitation. With the presence of a large number of chemical functionalities within their structure, these building blocks provide a unique platform for significant surface modification through various chemistries. These chemical modifications are prerequisite, sometimes unavoidable, to adapt the interfacial properties of nanocellulose substrates or adjust their hydrophilic–hydrophobic balance. Therefore, various chemistries have been developed aiming to surface-modify these nano-sized substrates in order to confer to them specific properties, extending therefore their use to highly sophisticated applications. This review collocates current knowledge in the research and development of nanocelluloses and emphasizes more particularly on the chemical modification routes developed so far for their functionalization.
1,179 citations
TL;DR: A review of cellulose nanofibrillated cellulose (CNF) is presented in this article, covering raw materials selection, structural and chemical aspects, conventional and novel mechanical disintegration techniques, as well as biological and chemical pretreatments aimed at facilitating Nanofibril isolation.
1,071 citations
References
More filters
TL;DR: In this article, a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites is presented, and the influence of such treatments by taking into account fibre content on the creep, quasi-static, cyclic dynamic and impact behaviour of natural fibre reinforced plastics are discussed in detail.
4,160 citations
TL;DR: This review summarizes the main advances published over the last 15 years, outlining the synthesis, biodegradability and biomedical applications ofBiodegradable synthetic and natural polymers.
3,801 citations
TL;DR: The structural aspects and properties of several biofibers and biodegradable polymers, recent developments of different biofiber and biocomposites are discussed in this paper.
Abstract: Recently the critical discussion about the preservation of natural resources and recycling has led to the renewed interest concerning biomaterials with the focus on renewable raw materials. Because of increasing environmental consciousness and demands of legislative authorities, use and removal of traditional composite structures, usually made of glass, carbon or aramid fibers being reinforced with epoxy, unsaturated polyester, or phenolics, are considered critically. Recent advances in natural fiber development, genetic engineering and composite science offer significant opportunities for improved materials from renewable resources with enhanced support for global sustainability. The important feature of composite materials is that they can be designed and tailored to meet different requirements. Since natural fibers are cheap and biodegradable, the biodegradable composites from biofibers and biodegradable polymers will render a contribution in the 21st century due to serious environmental problem. Biodegradable polymers have offered scientists a possible solution to waste-disposal problems associated with traditional petroleum-derived plastics. For scientists the real challenge lies in finding applications which would consume sufficiently large quantities of these materials to lead price reduction, allowing biodegradable polymers to compete economically in the market. Today's much better performance of traditional plastics are the outcome of continued RD however the existing biodegradable polymers came to public only few years back. Prices of biodegradable polymers can be reduced on mass scale production; and such mass scale production will be feasible through constant R&D efforts of scientists to improve the performance of biodegradable plastics. Manufacture of biodegradable composites from such biodegradable plastics will enhance the demand of such materials. The structural aspects and properties of several biofibers and biodegradable polymers, recent developments of different biodegradable polymers and biocomposites are discussed in this review article. Collaborative R&D efforts among material scientists and engineers as well as intensive co-operation and co-ordination among industries, research institutions and government are essential to find various commercial applications of biocomposites even beyond to our imagination.
2,612 citations
"Microfibrillated cellulose and new ..." refers background in this paper
...2005), which is higher than that generally recorded for macro-scale natural fibers (Mohanty et al. 2000) and is of the same order as the elastic modulus of glass fibers (70 GPa; Saheb and Jog 1999; Juntaro et al....
[...]
TL;DR: A review of natural fiber reinforced composites is presented in this paper with special reference to the type of fibers, matrix polymers, treatment of fibers and fiber-matrix interface.
Abstract: Natural fiber reinforced composites is an emerging area in polymer science. These natural fibers are low cost fibers with low density and high specific properties. These are biodegradable and non-abrasive. The natural fiber composites offer specific properties comparable to those of conventional fiber composites. However, in development of these composites, the incompatibility of the fibers and poor resistance to moisture often reduce the potential of natural fibers and these draw backs become critical issue. This review presents the reported work on natural fiber reinforced composites with special reference to the type of fibers, matrix polymers, treatment of fibers and fiber-matrix interface. © 1999 John Wiley & Sons, Inc. Adv in Polymer Techn 18: 351–363, 1999
2,210 citations
"Microfibrillated cellulose and new ..." refers background in this paper
...2000) and is of the same order as the elastic modulus of glass fibers (70 GPa; Saheb and Jog 1999; Juntaro et al. 2007)....
[...]
TL;DR: In this paper, natural fibres (sisal, kenaf, hemp, jute and coir) reinforced polypropylene composites were processed by compression molding using a film stacking method.
2,161 citations