Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800
15 Nov 2000-Materials Science and Engineering A-structural Materials Properties Microstructure and Processing (Elsevier)-Vol. 292, Iss: 1, pp 74-82
TL;DR: In this article, the weld fusion zones and the interfaces with the base materials were characterised in detail using light and transmission electron microscopy, showing that the stainless steel weld metals solidified dendritically, while the 16-8-2 (16%Cr-8%Ni-2%Mo) weld metal showed a predominantly cellular substructure.
Abstract: For joining type 316LN austenitic stainless steel to modified 9Cr–1Mo steel for power plant application, a trimetallic configuration using an insert piece (such as alloy 800) of intermediate thermal coefficient of expansion (CTE) has been sometimes suggested for bridging the wide gap in CTE between the two steels. Two joints are thus involved and this paper is concerned with the weld between 316LN and alloy 800. These welds were produced using three types of filler materials: austenitic stainless steels corresponding to 316, 16Cr–8Ni–2Mo, and the nickel-base Inconel 182 1 . The weld fusion zones and the interfaces with the base materials were characterised in detail using light and transmission electron microscopy. The 316 and Inconel 182 weld metals solidified dendritically, while the 16–8–2 (16%Cr–8%Ni–2%Mo) weld metal showed a predominantly cellular substructure. The Inconel weld metal contained a large number of inclusions when deposited from flux-coated electrodes, but was relatively inclusion-free under inert gas-shielded welding. Long-term elevated-temperature aging of the weld metals resulted in embrittling sigma phase precipitation in the austenitic stainless steel weld metals, but the nickel-base welds showed no visible precipitation, demonstrating their superior metallurgical stability for high-temperature service.
Citations
More filters
TL;DR: In this article, the microstructural features of the dissimilar weldments involving Ni based superalloy Inconel 718 and martensitic stainless steel, AISI 416 that is difficult to weld were analyzed using optical and scanning electron microscopy.
40 citations
TL;DR: In this paper, the thermal properties of transition joints between 9Cr-1Mo steel and Alloy 800 steels are investigated for high-temperature components of power plant power plants, and the results show that the tendency for carbon to diffuse from the ferritic steel into the weld metal is much less pronounced than when 2.25Cr- 1Mo steel is used as the ferrite part.
Abstract: Transition joints between ferritic steel and austenitic stainless steel are commonly encountered in high-temperature components of power plants. Service failures in these are known to occur as a result, mainly, of thermal stresses due to expansion coefficient differentials. In order to mitigate the problem, a trimetallic configuration involving an intermediate piece of a material such as Alloy 800 between the ferritic and austenitic steels has been suggested. In our work, modified 9Cr-1Mo steel and 316LN stainless steel are used as the ferritic and austenitic components and the thermal behavior of the joints between modified 9Cr-1Mo steel and Alloy 800 is described in this article. The joints, made using the nickel-base filler material INCONEL 82/182 (INCONEL 82 for the root pass by gas-tungsten arc welding and INCONEL 182 for the filler passes by shielded-metal arc welding), were aged at 625 °C for periods up to 5000 hours. The microstructural changes occurring in the weld metal as well as at the interfaces with the two parent materials are characterized in detail. Results of across-the-weld hardness surveys and cross-weld tension tests and weld metal Charpy impact tests are correlated with the structural changes observed. Principally, the results show that (1) the tendency for carbon to diffuse from the ferritic steel into the weld metal is much less pronounced than when 2.25Cr-1Mo steel is used as the ferritic part; and (2) intermetallic precipitation occurs in the weld metal for aging durations longer than 2000 hours, but the weld metal toughness still remains adequate in terms of the relevant specification.
39 citations
TL;DR: In this paper, the pattern of microstructure development and the related mechanical behavior in dissimilar welded joints through a systematic approach was addressed, while impact energy was seen to be a function of austenite in-grain misorientation and δ-ferrite percentage.
38 citations
TL;DR: In this article, a comparative study on Incoloy 825 Ni-based alloy and SAF 2507 super duplex stainless steel dissimilar joints was conducted by optical microscopy, scanning electron microscopy equipped with an energy dispersive spectroscopy and X-ray diffraction.
38 citations
TL;DR: In this paper, the wear performance of uncoated tool inserts and PVD coated tool inserts was evaluated by comparison during up and down face milling Inconel 182 with different MQL nozzle positions.
Abstract: Minimum quantity lubrication (MQL) is one of the promising Green Manufacturing Technology to meet the challenge of machining difficult-to-cut material Inconel 182 which is deposited by Shield Metal Arc Welding (SMAW). Unlike the flood lubrication, in MQL, only a small amount of non-toxic biodegradable oil are directly sprayed to the cutting zone by compressed air, which can reduce friction coefficient and temperature. Wear performance of uncoated tool inserts and Physical Vapor Deposition (PVD) coated tool inserts are evaluated by comparison during up and down face milling Inconel 182 with different MQL nozzle positions. Results indicate that uncoated tool inserts are not suitable for face milling Inconel 182 in all lubrication conditions due to the severe flank wear and the catastrophic breakage. On the contrary, PVD coated tool inserts have longer tool life compared to uncoated ones in all lubrication conditions. MQL nozzle positioned at tool cut into workpiece and positioned at tool cut out of workpiece in down milling as well as MQL nozzle positioned at tool cut out of workpiece in up milling can effectively prolong tool life of PVD coated tool inserts, which can be selected as the optimal lubrication solution for face milling Inconel 182.
35 citations
References
More filters
Book•
01 Oct 1988
TL;DR: In this article, the importance of the Constitution diagram for the understanding of Welding Phenomena is discussed, and a detailed description of the Welding and post-weld surface treatment of Fabrications and Welded Components made from Austenitic Stainless Steels is given.
Abstract: Contents: Significance of Constitution Diagrams for the Understanding of Welding Phenomena * Metallurgical Processes During Solidification and Cooling in Stainless Steel Weld Metal * Metallurgical Phenomena in Secondary Crystallization of Stainless Steels and Weld Metals * Precipitation Phenomena in Stainless Steel and Weld Metals * Hot Cracking Resistance During the Welding of Austenitic Stainless Steels * Welding Metallurgy of Ferritic Stainless Chromium Steels with Carbon Contents Below 0.15 per cent * Welding Metallurgy of Low Carbon Chromium-Nickel Martensitic Stainless Steels (Soft Martensitic Steels) * Welding Metallurgy of Duplex Austenitic-Ferritic Stainless Steels * Welding Metallurgy of Austenitic Stainless Steels * General Instructions for the Welding and Post-Weld Surface Treatments of Fabrications and Welded Components Made from Austenitic Stainless Steel * Welding Metallurgy of Heat Resisting Steels * Welding Metallurgy of Austenitic-Ferritic Dissimilar Joints * Appendix: Abbreviations and Short Designations * References * Author Index * Subject Index.
394 citations
TL;DR: In this article, a trimetallic joint involving modified 9Cr-1Mo steel and 316LN austenitic stainless steel as the base materials and Alloy 800 as the intermediate piece was investigated.
150 citations
TL;DR: In this paper, a wide range of fundamental knowledge of solidification processes is applied to the study of fusion-weld solidification, including inoculants, stimulated surface nucleation, dynamic grain refinement, and arc modulation.
Abstract: To an increasing extent the wide range of fundamental knowledge of solidification processes is being applied to the study of fusion-weld solidification. Initially this fundamental knowledge is surveyed concisely and those areas of particular importance to weld-pool solidification are indentified. This is followed by an examination of phenomenological studies of the solidification behaviour of fusion welds in which particular attention is given to factors influencing the development of the fusion-zone structure. Then, the ways in which the metallurgical structure of the fusion zone influences the mechanical properties of the weldment are reviewed. Attention is then given to methods of controlling the fusion-zone structure by using inoculants, stimulated surface nucleation, dynamic grain refinement, and arc modulation. The gains and advantages which accrue from the way in which structure control affects properties are then considered. The review concludes with a discussion of likely future developme...
119 citations
TL;DR: In this paper, a ternary system composed of a pure iron substrate and a 70Ni-30Cu filler metal was used to determine the nature and evolution of boundaries and structure in dissimilar metal welds.
Abstract: Cracking, or disbonding, along the fusion boundary in dissimilar metal welds has been a persistent problem, particularly in applications where austenitic alloys are clad on to structural steels for corrosion protection. Many failures in dissimilar metal welds occur as a result of cracking along a boundary that runs parallel to the fusion boundary in the adjacent weld metal. A preliminary investigation was undertaken to determine the nature and evolution of boundaries and structure in dissimilar metal welds using a simple ternary system composed of a pure iron substrate and a 70Ni–30Cu (Monel) filler metal. Changes in base metal dilution were found to alter the evolution of boundaries and structures near the fusion boundary dramatically. Optical metallography and electron microanalysis reveal that the resulting weld microstructures and boundaries are similar to those observed in engineering materials used for cladding and corrosion resistant overlay. Transmission electron diffraction analysis revea...
63 citations
TL;DR: In this article, a series of laser and gas tungsten arc welds traversing stainless steels of different chemical compositions has been studied, to elucidate the role of austenite or ferrite nucleation and cooling rate on solidification behaviour.
Abstract: A series of laser and gas tungsten arc welds traversing stainless steels of different chemical compositions has been studied, to elucidate the role of austenite or ferrite nucleation and cooling rate on solidification behaviour. It has been found that a steel with a high CrEQ/NiEQ ratio can be induced to solidify as metastable austenite by initiating the weld in a steel with a lower CrEQ/NiEQ ratio in which the thermodynamically stable solidification mode is austenitic. The austenite dendrites are then found to continue growth across the weld junction into the undiluted regions of the high CrEQ/NiEQ ratio material. By providing austenite particles in this way, nucleation is rendered unnecessary and it is found that solidification to metastable austenite can be induced at cooling rates significantly lower than previously encountered. The results of these and other experiments in which the welding speed was changed during the experiment are interpreted to yield new information about the mechanisms o...
37 citations