Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
03 Apr 2016
TL;DR: This paper elaborates on some 5G key research areas such as: identification of the most compelling use-cases and Key Performance Indicators for future 5G systems, advantages and challenges of millimeter-wave (mmWave) technologies, channel measurements and channel modeling, network architecture; and the design of a new mobile radio interface including multi-node and multi-antenna transceiver architecture.
Abstract: mmMAGIC (Millimetre-Wave Based Mobile Radio Access Network for Fifth Generation Integrated Communications) is an EU funded 5G-PPP project, whose overall objective is to design and pre-develop a mobile radio access technology (RAT) operating in the 6–100 GHz range, capable of impacting standards and other relevant fora. The focus of the project is on extreme Mobile Broadband, which is expected to drive the 5G requirements for massive increase in capacity and data-rates. This paper elaborates on some 5G key research areas such as: identification of the most compelling use-cases and Key Performance Indicators (KPIs) for future 5G systems, advantages and challenges of millimeter-wave (mmWave) technologies, channel measurements and channel modeling, network architecture; and the design of a new mobile radio interface including multi-node and multi-antenna transceiver architecture.
20 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...Second, as observed in recent measurement campaigns [19][20], the number of path clusters as well as the angular spread of each cluster can be small....
[...]
...[20] Rangan, S....
[...]
TL;DR: In this paper, a thorough analysis of the performance of planar arrays with a regular periodic lattice is carried out and applied to massive multiple-input-multiple-output (MIMO) systems operating within 5G NR n257 and n258 frequency band.
Abstract: A thorough analysis of the performance of planar arrays with a regular periodic lattice is carried out and applied to massive multiple-input-multiple-output (MIMO) systems operating within 5G NR n257 and n258 frequency band. It is shown that, among different arrangements with uniform spacing, a triangular lattice guarantees the reduction of the Average Side Lobe Level (ASLL), a better angular scan resolution of the main beam within a predefined angular sector and a lower mutual coupling level among elements. Moreover, single beam and multibeam application scenarios are considered for the performance comparison and both cases assess the remarkable features offered by a triangular arrangement. Particular attention is paid to illustrate, for different propagation channel scenarios, the effects of the array lattice on overall system performance including average gain as well as Signal-to-Interference plus Noise Ratio (SINR) and Sum Spectral Efficiency (SSE). The obtained results prove that a regular and periodic triangular lattice is appealing for arrays to be adopted in massive MIMO 5G systems.
20 citations
TL;DR: This paper discusses eavesdropper attack strategies for 802.11ad mmWave systems and provides the first analytical model to characterize the success possibility of eavesdropping in both opportunistic stationary attacks and active nomadic attacks.
Abstract: Next generation wireless communication networks utilizing 60 GHz millimeter wave (mmWave) frequency bands are expected to achieve multi-gigabit throughput with the use of highly directional phased-array antennas. These directional signal beams provide enhanced security to the legitimate networks due to the increased difficulties of eavesdropping. However, there still exists significant possibility of eavesdropping since 1) the reflections of the signal beam from ambient reflectors enables opportunistic stationary eavesdropping attacks, and; 2) carefully designed beam exploration strategy enables active nomadic eavesdropping attack. This paper discusses eavesdropper attack strategies for 802.11ad mmWave systems and provides the first analytical model to characterize the success possibility of eavesdropping in both opportunistic stationary attacks and active nomadic attacks. We derive the success probability of eavesdropping considering the ambient reflectors in the environment and errors introduced in the beam exploration strategies of the proposed eavesdropping attacker models. We study the success probability for both opportunistic stationary attack scenario and active nomadic attack scenario through numerical simulations. In addition to numerical simulations, we also evaluate the proposed attacker models using an 802.11ad test bed consisting of commercially available off-the-shelf devices.
20 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...11ad mmWave networks are characterized by highly directional transmission enabled by beamforming [1]....
[...]
...At mmWave frequencies, the signal experiences high attenuation due to propagation and penetration losses [1]....
[...]
TL;DR: Results suggest that the considered ray tracing model can be reliable enough to reproduce the general performance trends of different beamforming schemes and to assist the beam-searching phase, therefore potentially reducing the related time delay and computational overhead.
Abstract: This study concerns the evaluation of beamforming techniques in multi-user indoor environment at the mm-wave frequency band of 70 GHz using both measurements and ray tracing simulations carried out in a furnished small-office environment. The goal of the work is twofold: 1) to evaluate ray tracing as a reliable directional channel model for beamforming assessment and for real-time assistance in the beam-searching phase and 2) to evaluate simple beamforming schemes as means to enforce spatial division in a small-indoor environment. Results suggest that the considered ray tracing model can be reliable enough to reproduce the general performance trends of different beamforming schemes and to assist the beam-searching phase, therefore potentially reducing the related time delay and computational overhead.
20 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...forthcoming 5G wireless systems, BF must be adaptive [7],...
[...]
TL;DR: An isometric constellation design is proposed to find constellations that enable non-coherent reception with multiple users, and reduce SER simultaneously, and numerical simulations are carried out to highlight the effectiveness of the proposed scheme.
Abstract: In this paper, a joint multi-user constellation is proposed for energy detection-based non-coherent massive multiple-input multiple-output system. This is motivated by the simple design and high energy efficiency it entails for both the transmitter and receiver. First, the orthogonal codes is employed to suppress the multi-user interference. However, this comes at the price of consuming more communications resources. In this study, the key to reduce code redundancy is the design of a joint constellation since it makes energy detection applicable when multiple users employ the same orthogonal codes. Although it is unsolvable initially, our analysis indicates that through minimizing the symbol-error rate (SER), the joint constellation design becomes feasible. Concretely, two analytical expressions of SER based on Gamma and Gaussian distributions are derived. Via minimizing the error probability, an important result that the joint constellation should satisfy is obtained. Accordingly, an isometric constellation design is proposed to find constellations that enable non-coherent reception with multiple users, and reduce SER simultaneously. In addition, decoding regions of symbol decision are optimized to further improve the error performance. In the end, numerical simulations are carried out to highlight the effectiveness of our proposed scheme.
20 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...In addition, given the massive radio frequency (RF) chains, channel estimation would greatly increase complexity, energy consumption and demands on the front-haul infrastructure [4], [5]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]