Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: In this article , a joint relay selection and power allocation (JRP) method is developed where the destination and source aim for jamming the reception of both the untrusted relays and passive Eves.
Abstract: The physical layer security (PLS) of millimeter wave (mmWave) communication systems is investigated, where the secure source-to-destination communication is assisted by an untrusted relay selected from a group of them and there are also several passive eavesdroppers (Eves) in the network. In the considered system model, while the distributions of the untrusted relays and Eves follow a homogeneous Poisson Point Process (PPP). To maximize the instantaneous secrecy rate, a novel joint relay selection and power allocation (JRP) method is developed where the destination and source aim for jamming the reception of both the untrusted relays and passive Eves. New expressions of the optimal power allocation (OPA) are derived for both non-colluding Eves (NCE) and colluding Eves (CE). Subsequently, by considering the impact of potential blockages, new closed-form equations are derived for analyzing the system’s ergodic secrecy rate (ESR) and secrecy outage probability (SOP) for transmission over fading mmWave channels. Finally, numerical examples are provided for demonstrating the superiority of our proposed JRP method over the relevant benchmarks found in the literature. Interestingly, the ESR increases with the density of untrusted relays for both the NCE and CE scenarios, which is a benefit of the improved probability of selecting a relay with a stronger second-hop channel. Furthermore, in the low transmit power regime, employing relatively low mmWave frequencies achieves better ESR, while in the high transmit power regime, high mmWave frequencies provide higher ESR.
14 citations
Posted Content•
TL;DR: It is shown that, over mmWave links, AQM mitigates the latency but cannot deliver high throughput, and the dynamic receive window approach is more responsive and therefore supports higher channel utilization while mitigating the delay, thus representing a viable solution.
Abstract: Due to massive available spectrum in the millimeter wave (mmWave) bands, cellular systems in these frequencies may provides orders of magnitude greater capacity than networks in conventional lower frequency bands. However, due to high susceptibility to blocking, mmWave links can be extremely intermittent in quality. This combination of high peak throughputs and intermittency can cause significant challenges in end-to-end transport-layer mechanisms such as TCP. This paper studies the particularly challenging problem of bufferbloat. Specifically, with current buffering and congestion control mechanisms, high throughput-high variable links can lead to excessive buffers incurring long latency. In this paper, we capture the performance trends obtained while adopting two potential solutions that have been proposed in the literature: Active queue management (AQM) and dynamic receive window. We show that, over mmWave links, AQM mitigates the latency but cannot deliver high throughput. The main reason relies on the fact that the current congestion control was not designed to cope with high data rates with sudden change. Conversely, the dynamic receive window approach is more responsive and therefore supports higher channel utilization while mitigating the delay, thus representing a viable solution.
14 citations
TL;DR: The results show that regarding SINR coverage probability, the SS strategy outperforms the CS strategy in the environment with dense blockages, and it is demonstrated that the moderate fractional power control (FPC) factors should be used at the low SinR thresholds, while full FPC is optimal for the high SInR thresholds.
Abstract: The upcoming wireless cellular networks will make use of higher segments of the frequency spectrum, i.e., millimeter wave (MMW) bands, for enabling extremely high data rates to support content-rich applications. In this paper, we investigate the uplink performance of MMW cellular networks with clustered users. By modeling the locations of users as a Poisson Cluster Process (PCP), we derive tractable expressions to evaluate the signal-to-interference-and-noise-ratio (SINR) coverage probability for two user association strategies, i.e., the closest selection (CS) strategy, where the nearest LoS BS serves the user and the strongest-selection (SS) strategy, where the user communicates with the BS that provides the most significant received signal among all BSs. Numerical results are provided to validate the accuracy of the analytical model under various system parameters. The results show that regarding SINR coverage probability, the SS strategy outperforms the CS strategy in the environment with dense blockages. The results also demonstrate that the moderate fractional power control (FPC) factors should be used at the low SINR thresholds, while full FPC is optimal for the high SINR thresholds.
14 citations
Cites methods from "Millimeter-Wave Cellular Wireless N..."
...One approach for the performance evaluation has been to use simulation by incorporating insights from the extensive measurements [3], [4]....
[...]
01 Dec 2014
TL;DR: Investigation of the mmW heterogeneous network (HetNet) capacity operating at 28GHz and 73GHz by system simulations, in both the 3GPP scenario and Munich urban city finds that in both scenarios the capacity gain is 7~10-fold under the same user-pico association.
Abstract: Current communication technologies at the microwave band are insufficient to meet the exponential increase in wireless data demands, essentially due to scarcity in bandwidth. Millimeter wave (mmW) offers a potential means to fulfill such soaring demands with wide bandwidth and beamforming capabilities. In this paper we investigate the mmW heterogeneous network (HetNet) capacity operating at 28GHz and 73GHz by system simulations, in both the 3GPP scenario and Munich urban city. Two types of control channel modes for pico cell coverage are analyzed. Simulation results show that control signaling at microwave band provides better coverage, while data communications at the mmW band enable up to multi-Tbps/km2 system capacity, which is also dependent on the pico-user association. It is found that in both scenarios the capacity gain of 73GHz over 28GHz is in the range of 7∼10-fold under the same user-pico association.
14 citations
01 Aug 2017
TL;DR: This paper proposes a novel frequency diverse array (FDA) beamforming approach to differentiating the LU and Eve, and identifies some cases where the SRM problem can be optimally solved in closed form.
Abstract: The conventional physical-layer (PHY) security approaches, e.g., transmit beamforming and artificial noise (AN)-based design, may fail when the channels of legitimate user (LU) and eavesdropper (Eve) are close correlated. Due to the highly directional transmission feature of millimeter-wave (mmWave), this may occur in mmWave transmissions as the transmitter, Eve and LU are aligned in the same direction exactly. To handle the PHY security problem with directionally-aligned LU and Eve, we propose a novel frequency diverse array (FDA) beamforming approach to differentiating the LU and Eve. By intentionally introducing some frequency offsets across the antennas, the FDA beamforming generates an angle-range dependent beampattern. As a consequence, it can degrade the Eve's reception and thus achieve PHY security. In this paper, we maximize the secrecy rate by jointly optimizing the frequency offsets and the beamformer. This secrecy rate maximization (SRM) problem is hard to solve due to the tightly coupled variables. Nevertheless, we show that it can be reformulated into a form depending only on the frequency offsets. Building upon this reformulation, we identify some cases where the SRM problem can be optimally solved in closed form. Numerical results demonstrate the efficacy of FDA beamforming in achieving PHY security, even for aligned LU and Eve.
14 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...One important feature of mmWave communications is the highly directional transmission, especially in line-of-sight (LOS) scenarios [9]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]