Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: A Minimum-Delay relaying scheme is proposed, and by leveraging stochastic geometry, a tractable analytical framework is presented to investigate the signal-to-interference-plus-noise-ratio (SINR) distribution of devices at each-tier, thereby computing the expected delay and delay outage probabilities using Lagrange optimization.
Abstract: For future wireless networks, applications such as Industrial Internet of Things are strictly delay-sensitive. Meanwhile, millimeter-wave (mmWave) communication is a promising means to provide ultra-high data rate and ultra-low latency services to massive number of devices. In order to minimize uplink end-to-end delay in such machine-to-machine (M2M) mmWave communications, we investigate buffer-aided multi-hop relaying networks and formulate the problem as a multi-tier queueing system. We propose a Minimum-Delay relaying scheme, and by leveraging stochastic geometry, we present a tractable analytical framework to investigate the signal-to-interference-plus-noise-ratio (SINR) distribution of devices at each-tier, thereby computing the expected delay and delay outage probabilities using Lagrange optimization. A state-of-art max-SINR relaying scheme is analyzed for comparison, and the performance of Minimum-Delay relaying in 3-tier architecture is further analyzed. The derived average delay and delay outage probability are validated through simulations based on multiple cells in a dense urban scenario. Numerical results show that the proposed Minimum-Delay relaying scheme achieves significant lower average end-to-end delay than direct association or the max-SINR relaying scheme. Furthermore, results for Jain’s fairness and spectral efficiency reveal that the Minimum-Delay relaying scheme has even greater performance improvement under high traffic loads.
10 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...Wireless communications in mmWave bands (from 30 GHz to 300 GHz) have attracted much attention from academic community and industry for its potential to fulfil multi-gigabits per second (Gbps) transmissions in future mobile broadband access [3], [4]....
[...]
TL;DR: A new index is proposed based on a new index that quantifies the ability of any interference model in correctly predicting harmful interference events, that is, link outages, and makes it possible to adopt the simplest interference model of adequate accuracy for every wireless network.
Abstract: In wireless communication networks, interference models are routinely used for tasks, such as performance analysis, optimization, and protocol design. These tasks are heavily affected by the accuracy and tractability of the interference models. Yet, quantifying the accuracy of these models remains a major challenge. In this paper, we propose a new index for assessing the accuracy of any interference model under any network scenario. Specifically, it is based on a new index that quantifies the ability of any interference model in correctly predicting harmful interference events, that is, link outages. We consider specific wireless scenario of both conventional sub-6 GHz and millimeter-wave networks and demonstrate how our index yields insights into the possibility of simplifying the set of dominant interferers, replacing a Nakagami or Rayleigh random fading by an equivalent deterministic channel, and ignoring antenna sidelobes. Our analysis reveals that in highly directional antenna settings with obstructions, even simple interference models (such as the classical protocol model) are accurate, while with omnidirectional antennas, more sophisticated and complex interference models (such as the classical physical model) are necessary. Our new approach makes it possible to adopt the simplest interference model of adequate accuracy for every wireless network.
10 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
..., 20–35 dB due to the human body [38]) justifies the impenetrable obstacle assumption....
[...]
31 Mar 2022
TL;DR: It is envisage that the use of 60 GHz communication and smart antenna systems are crucial for modern industrial communication so that URLLC in Industry 4.0 and beyond could soar to its full potential.
Abstract: Industry 4.0 is a new paradigm of digitalization and automation that demands high data rates and real-time ultra-reliable agile communication. Industrial communication at sub-6 GHz industrial, scientific, and medical (ISM) bands has some serious impediments, such as interference, spectral congestion, and limited bandwidth. These limitations hinder the high throughput and reliability requirements of modern industrial applications and mission-critical scenarios. In this paper, we critically assess the potential of the 60 GHz millimeter-wave (mmWave) ISM band as an enabler for ultra-reliable low-latency communication (URLLC) in smart manufacturing, smart factories, and mission-critical operations in Industry 4.0 and beyond. A holistic overview of 60 GHz wireless standards and key performance indicators are discussed. Then the review of 60 GHz smart antenna systems facilitating agile communication for Industry 4.0 and beyond is presented. We envisage that the use of 60 GHz communication and smart antenna systems are crucial for modern industrial communication so that URLLC in Industry 4.0 and beyond could soar to its full potential.
10 citations
TL;DR: Numerical results show that the proposed beam-switching based spatial modulation is superior to transmission over the strongest propagation path and is able to yield a satisfactory error performance in mmWave MIMO uplink.
Abstract: Spatial modulation is an efficient transmission scheme for RF-chain limited MIMO systems. In this paper, we design a beam-switching based spatial modulation for mmWave MIMO uplink systems. At user side, a power iteration based algorithm is proposed to generate spatial symbols under the constant modulus constraint. With the generated spatial codebook, the optimal transmission mode is determined. At base station side, a round-robin path selection algorithm is proposed to select paths that are separated in angle of arrival. Inter-user interference is then suppressed by constraining the power of the received spatial symbols over selected paths only. Finally, ordered successive interference cancelation is applied to further reduce interference among users. Numerical results show that the proposed beam-switching based spatial modulation is superior to transmission over the strongest propagation path and is able to yield a satisfactory error performance in mmWave MIMO uplink.
10 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
..., mmWave band [1]–[3], [5], beamforming gain becomes essential to mitigate the severe propagation path loss of new frequency band....
[...]
TL;DR: A novel learning-based DAPS HO technology named intelligent DAPS (I-DAPS) HO is proposed to avoid sudden radio link failure (RLF) while providing a high data rate.
Abstract: The recently proposed dual active protocol stack (DAPS) handover (HO) is one of the mobility enhancements that can effectively reduce the handover interruption time (HIT) in 5G networks. By using a DAPS solution, users can be connected to both the source cell and target cell during the HO execution phase, and thereby 0 ms of HIT becomes possible. However, the DAPS HO procedure may fail in 5G networks due to the channel characteristics of millimeter-wave (mmWave) signals. Since mmWave links are vulnerable to blockages, the received signal quality may degrade suddenly, which gives rise to an abrupt outage before DAPS HO can be completed. In this paper, a novel learning-based DAPS HO technology named intelligent DAPS (I-DAPS) HO is proposed to avoid sudden radio link failure (RLF) while providing a high data rate. The proposed I-DAPS HO uses a double deep Q-network (DDQN) deep reinforcement learning (DRL) framework, where blockage predictions are made based on past received signal data such that RLFs can be actively avoided. The performance evaluation demonstrates that the proposed I-DAPS HO scheme can effectively avoid RLF and improve the throughput performance compared to advanced 5G HO schemes.
10 citations
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]