Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: In this paper, an extrinsic information transfer (EXIT) chart assisted approach is used for the convergence analysis of $m$ -sequences using recursive soft sequence estimation (RSSE) in the context of Nakagami-m fading channels.
Abstract: A delay of less than one millisecond is required by low-latency 5G wireless communication systems for supporting the “tactile” Internet. Hence, conventional initial synchronisation cannot be readily employed because of its potentially excessive delay. In this paper, an extrinsic information transfer (EXIT) chart assisted approach is used for the convergence analysis of $m$ -sequences using recursive soft sequence estimation (RSSE) in the context of Nakagami-m fading channels. Explicitly, the novelty of our work is based on employing a new type of EXIT charts operating without using interleavers. This is a challenge, because the original EXIT charts rely on the employment of long, high-delay interleavers for ensuring that the inputs to the decoders become uncorrelated. We then evaluate the performance of various classes of $m$ -sequences with the aid of the proposed EXIT charts and demonstrate that the $m$ -sequences generated by the lower order polynomials maximize the mutual information more promptly with the aid of our RSSE scheme than those that belong to a higher order polynomial.
5 citations
01 Jan 2019
TL;DR: In this article, the influence of impurities and defects on charge transport, the limitations of the saturation velocity, and the effect of velocity saturation and self-heating on the transit frequency (fT) and the maximum frequency of oscillation (fmax) of graphene field effect transistor (GFETs) are analyzed.
Abstract: New device technologies and materials are continuously investigated, in order to increase the bandwidth of high-speed electronics, thereby extending data rate and range of applications. The 2D-material graphene, with its intrinsically extremely high charge carrier velocity, is considered as a promising new channel material for advanced high frequency field-effect transistors. However, most fabrication processes introduce impurities and defects at the interface between graphene and adjacent materials, which degrade the device performance. In addition, at high drain fields, required for high transistor gain, the close proximity of the adjacent materials limits the saturation velocity, and there is a significant increase in the channel temperature caused by self-heating. In this thesis, the influence of impurities and defects on charge transport, the limitations of the saturation velocity, and the effect of velocity saturation and self-heating on the transit frequency (fT) and the maximum frequency of oscillation (fmax) of graphene field effect transistor (GFETs) are analysed. In addition, GFETs with state-of-the-art extrinsic fT =34 GHz and fmax =37 GHz, and an integrated 200-GHz GFET based receiver are presented. Also, through the development of a fabrication process of GFETs with a buried gate configuration, this work contributed to the direct nanoscopic observation of plasma waves in the GFET channel during terahertz illumination. The study was conducted by (i) setting up a model describing the influence of impurities and defects on capacitance and transfer characteristics at low electric fields, (ii) by developing a method for studying the limiting mechanisms of the charge carrier velocity in the graphene channel at high electric fields and answering the question whether velocity saturation improves fmax, (iii) by developing a method to study the channel temperature and its effect on fT and fmax. It was found that scattering by remote optical phonons limits the saturation velocity and charge carriers emitted from interface states at high fields are preventing the current to saturate and, hence, limiting fT and fmax. Additionally, the study shows that the channel temperature in GFETs can increase significantly causing degradation of the high frequency performance due to the decrease of charge carrier mobility and velocity. In summary, this work shows that it is necessary to develop a GFET design and fabrication process providing clean and defect-free interfaces, to minimise parasitic effects, and to use materials with higher optical phonon energies and higher thermal conductivities than those used today. This will allow for realisation of GFETs with extrinsic fT and fmax in the sub-terahertz range.
5 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...This allows for utilisation of THz radiation in security imaging systems [5], in diagnostic tools in medicine and life sciences [6] and in high-speed communication networks [7]....
[...]
16 Aug 2019
TL;DR: DBmmWave is proposed, as the first chance-constrained stochastic programming (CCSP) framework for joint AP, and the effectiveness of CCSP in handling the trade-off between the number of APs and the network coverage is demonstrated.
Abstract: At millimeter wave (mmWave) frequencies, high attenuation in propagation and severe blockage by obstacles lead to high uncertainty in the availability of links between access points (APs) and mobile devices. Considering this uncertainty in combination with the inherent user location uncertainty, we propose DBmmWave, as the first chance-constrained stochastic programming (CCSP) framework for joint AP ${d}$ eployment and ${b}$ eam steering in mmWave networks. Extensive results are generated to quantify the impact of channel conditions and user distribution on the network coverage and the required number of mmWave APs. Our results demonstrate the effectiveness of CCSP in handling the trade-off between the number of APs and the network coverage.
5 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...propagation and severe blockage of mmWave links with obstacles [3], [4]....
[...]
TL;DR: In this article, a performance evaluation of selective mapping localised single carrier frequency division multiple access (SLM LSC-FDMA) is presented over channel measured at 30 GHz, where measurements were taken between three buildings under non-line-of-sight (NLOS) for a propagation path length of 183 m.
Abstract: A performance evaluation of selective mapping localised single carrier frequency division multiple access technique (SLM LSC-FDMA) is presented over channel measured at 30 GHz. These measurements were taken between three buildings under non-line-of-sight (NLOS) for a propagation path length of 183 m. Simulation results present a peak-to-average power ratio gain of 3.78 dB for the proposed scheme over localised orthogonal frequency division multiple access system and an acceptable bit error rate with and without high power amplifier compared with LSC-FDMA. These results show an improvement of the transmission efficiency under NLOS outdoor scenario at 30 GHz. Hence, these results suggest the use of SLM LSC-FDMA wave form for fifth generation mobile communication at 30 GHz.
5 citations
Posted Content•
TL;DR: This paper studies the maximum throughput achievable with optimal scheduling in multi-hop mmWave picocellular networks with Multi-user Multiple-Input Multiple-Output (MU-MIMO) radios and makes MU- MIMO MBP scheduling tractable by assuming fixed power allocation, so the optimal scheduler is the Maximum Weighted DBSG.
Abstract: This paper studies the maximum throughput achievable with optimal scheduling in multi-hop mmWave picocellular networks with Multi-user Multiple-Input Multiple-Output (MU-MIMO) radios. MU-MIMO enables simultaneous transmission to multiple receivers (Space Division Multiplexing) and simultaneous reception from multiple transmitters (Space Division Multiple Access). The main contribution is the extension to MU-MIMO of the Network Utility Maximization (NUM) scheduling framework for multi-hop networks. We generalize to MU-MIMO the classic proof that Maximum Back Pressure (MBP) scheduling is NUM optimal. MBP requires the solution of an optimization that becomes harder with MU-MIMO radios. In prior models with one-to-one transmission and reception, each valid schedule was a matching over a graph. However, with MU-MIMO each valid schedule is, instead, a Directed Bipartite SubGraph (DBSG). In the general case this prevents finding efficient algorithms to solve the scheduler. We make MU-MIMO MBP scheduling tractable by assuming fixed power allocation, so the optimal scheduler is the Maximum Weighted DBSG. The MWDBSG problem can be solved using standard Mixed Integer Linear Programing. We simulate multi-hop mmWave picocellular networks and show that a MU-MIMO MBP scheduler enables a 160% increase in network throughput versus the classic one-to-one MBP scheduler, while fair rate allocation mechanisms are used in both cases.
5 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...M ILLIMETER wave (mmWave) frequency bands (30-300 GHz) have been proposed as a candidate to satisfy the spectrum demands of fifth generation (5G) cellular wireless networks [2], [3]....
[...]
...MmWave propagation is studied in [2], [3], [18]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]