Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: In this paper , a compact and low-profile filtering antenna featuring simultaneously bilateral high selectivity and 5G band notch functionality is presented, which is achieved by using innovative ground etches instead of microstrips on the top layer.
Abstract: This paper presents a compact and low-profile filtering antenna featuring simultaneously bilateral high selectivity and 5G band notch functionality. The bilateral high selectivity of this quasi-Yagi antenna is achieved by using innovative ground etches instead of microstrips on the top layer. Independent U-shaped split ring on the top layer endows the filtering antenna with an additional property, namely the band notch functionality. By modifying the arm length of split ring, the notched band can completely cover 5G sub-6 GHz (3.4–3.8 GHz). Moreover, the gain of end-fire filtering antennas mostly varies around 4.5 dBi within operational band. The radiation patterns of the proposed antenna ensure a desired antenna performance at different frequencies. The results of the measurements of the S-parameter as well as the gain and the radiation pattern of filtering antenna are consistent with respective simulation results.
2 citations
01 Jan 2022
TL;DR: In this article , the authors conduct a survey of state-of-the-art retransmission protocols, both automatic repeat request (ARQ) and hybrid ARQ, for various FSO communication scenarios, including point-to-point terrestrial, cooperative, multi-hop relaying, hybrid FSO/RF, satellite/aerial, and deep-space systems.
Abstract: Free space optical (FSO) communication has established a reputation for itself capable of delivering high-speed data services over long distances without exhausting radio frequency (RF) resources. FSO communication can be considered in different network scenarios, including inter-satellite/deep-space links, ground-station/vehicles, satellite/aerial links, and terrestrial links. It is expected to be one of the key enabling technologies for the next generation of 6G wireless networks. Nevertheless, despite the great potential of FSO communications, its performance suffers from various limitations and challenges: atmospheric turbulence, clouds, weather conditions, and pointing misalignment. The error-control solutions, including physical layer (PHY) and link-layer methods, aim to mitigate the transmission errors caused by such adverse issues. While the existing surveys on error-control solutions in FSO systems primarily focussed on the PHY methods, we instead provide a review of link-layer solutions. In particular, we conduct an extensive literature survey of state-of-the-art retransmission protocols, both automatic repeat request (ARQ) and hybrid ARQ (HARQ), for various FSO communication scenarios, including point-to-point terrestrial, cooperative, multi-hop relaying, hybrid FSO/RF, satellite/aerial, and deep-space systems. Furthermore, we provide a survey of recent literature and insightful discussion on the cross-layer design frameworks related to link-layer retransmission protocols in FSO communication networks. Finally, the lessons learned, design guidelines, related open issues, and future research directions are exposed.
2 citations
01 Sep 2016
TL;DR: A mapping mechanism between the physical layer and the mmWave propagation environment is suggested, whose inputs are the propagation environment parameters and the outputs are the key performance metrics of mmWave cellular networks, such as the signal-to-noise-and-interference ratio (SINR), data rate, etc.
Abstract: Millimeter wave (mmWave) is one of the key technologies in the fifth-generation (5G) wireless system, providing abundant spectrum resources to meet the ever-increasing wireless connections and a huge volume of data traffic. Nowadays, many experts and scholars in this field are focusing on the relationship between channel modeling and system performances of mmWave cellular networks. In this paper, we first present a brief review on the state-of-the-art mmWave cellular networks. Then, after summarizing the elements of mmWave channel modeling and methods of system performance analysis, we suggest a mapping mechanism between the physical layer and the mmWave propagation environment. The mapping is a function, whose inputs are the propagation environment parameters and the outputs are the key performance metrics of mmWave cellular networks, such as the signal-to-noise-and-interference ratio (SINR), data rate, etc. By utilizing the proposed mapping method, we are able to extract the key system design parameters, which are closely connected to the underlay propagation environment. Furthermore, parameterized by the mapping method, we can optimize the network layout (e.g., reposition base stations) to improve the quality of experience (QoE) of users. Finally, thanks to the open structure of the proposed mapping method, we plan to further apply the mechanism to enable multi-layer (e.g., data link layer and network layer) or cross-layer optimization in the future research.
2 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...The model is based on the conventional analytical framework for sub-6GHz cellular networks, but incorporates blockage effect, which is one unique characteristic of mmWave....
[...]
...Among the possible technical candidates for 5G, mmWave has shown great potential for the ultra-wide unlicensed highfrequency mmWave band, ranging from 3-300 GHz [3]....
[...]
...Even a small fraction of the feasible mmWave spectrum can provide many folds of increments in capacity and data rate over the current sub-6 GHz spectrum [4]....
[...]
TL;DR: In this paper, a useful method for 5G mm wave antenna array synthesis, based on genetic algorithm for the synthesis of linear array with nonuniform interelement spacing, was proposed.
Abstract: We will propose a useful method for 5G mm wave antenna array synthesis, based on Genetic Algorithm for the synthesis of linear array with nonuniform interelement spacing. Our design method was used to obtain the optimal position of the elements in order to get the minimum side lobe level and nulls in desired directions. The simulation results verify that proposed method outperforms the previously published methods in terms of suppression side lobe level while maintaining nulls in specified directions. The flexibility of proposed algorithm shows good potential for the antenna array synthesis.
2 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...Interference issues will become of crucial importance for coexistence of 5G devices, since number of mm wave devices will grow extensively in near future [3]....
[...]
TL;DR: An analogue modulation-type independent feed-forward carrier recovery approach for broadband wireless communication systems is introduced and can be used for transceivers working at high carrier frequencies as far as the realisation of frequency divider circuits and narrowband BPFs is technically feasible.
Abstract: An analogue modulation-type independent feed-forward carrier recovery approach for broadband wireless communication systems is introduced in this work. The focus is on the deliberately increased local oscillator (LO) signal feed-through to the radio frequency (RF) port of the up-converter in a direct conversion transmitter (TX). The strong LO feed-through is used at the receiver (RX) side to demodulate the RF signal. The heart of the carrier recovery block is a narrowband bandpass filter (BPF) and a frequency divider-by-n operated in injection-locking mode to the strong LO feed-through. The proposed method is investigated through circuit level simulations; while its feasibility is examined via the successful demodulation of complex data with various modulation types up to 8 Gbps for an E-band front-end. This method can be used for transceivers working at high carrier frequencies as far as the realisation of frequency divider circuits and narrowband BPFs is technically feasible.
2 citations
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]