Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
23 Feb 2022
TL;DR: In this article , the adaptive beamforming technique of uplink communication in 5G millimeter wave cellular network was developed to optimize the weight of narrowband for enhancing the performance of MMW communication, where the adaptiveness in the beamforning is also accomplished by modifying the weight updating strategy, which is performed by the hybrid metaheuristic algorithm called Salp-Bird Swarm optimization (S-BSO) using Shark Smell optimization (SSO) and Bird Swarm Algorithm (BSA).
Abstract: Millimeter wave (MMW) communication systems are emerging model for satisfying the increased necessity of high data rate of future generation cellular communications. The MMW frequencies give the prospective of increment in magnitude orders in terms of capacity. Though, MMW network links suffers from faster differentiation in quality and vulnerable to blockage. The main intent of this paper is to develop an adaptive beamforming technique of uplink communication in 5G millimeter wave cellular network. This paper optimizes the weight of narrowband in adaptive beamforming for enhancing the performance of MMW communication. Here, the adaptiveness in the beamforning is also accomplished by modifying the weight updating strategy of adaptive beamforming, which is performed by the hybrid meta-heuristic algorithm called Salp-Bird Swarm optimization (S-BSO) using Shark Smell optimization (SSO) and Bird Swarm Algorithm (BSA). The comparison is done over the existing models to prove the effective performance of the proposed adaptive beamforming.
1 citations
TL;DR: In this article , the authors proposed a fairness allocation strategy for mmWave networks to achieve minimum mainlobe interference avoidance and fair resource blocks assignment for user equipments (UEs).
Abstract: In the fifth-generation (5G) communication system, millimeter-wave (mmWave) technology brings superior capabilities, such as higher capacity, lower latency, and a flexible beamforming structure. The interference management strategies play an important role in mmWave beamforming networks to support the multibeam operation and maximize the overall data rates for user equipments (UEs). Currently, most of the existing research do not jointly consider designs, including the mainlobe interference (MI) avoidance and resource blocks (RBs) fairness allocation. In this article, a novel fairness allocation strategy is proposed to achieve the minimum MI and a fair RB assignment for mmWave networks. To achieve the minimum MI, an MI mitigation (MIM) algorithm is designed to maximize the data rate for each UE. With the adaptive mini-timeslot design, the MIM algorithm can achieve MI cancelation for all UEs at each identical timeslot and beam. To combine MIM and fairness for RB allocation among all UEs, the MIM-fairness allocation (MIM-FA) algorithm is also presented. Based on a novel mini-timeslot with designed multiple frames, the MIM-FA algorithm can simultaneously guarantee the fairness among all UEs and mitigate MI at each mini-timeslot for each beam. Additionally, the MIM-FA algorithm can be verified that it achieves the maximum user data rate with the identical number of RBs under the lowest number of frames. Simulation results validate that the proposed MIM and MIM-FA algorithms can provide a higher data rate and better fairness for different scenarios compared to current state-of-the-art competitive approaches.
1 citations
Dissertation•
27 Feb 2018
TL;DR: In this article, a metodologia de desenvolvimento dos defasadores de RF baseia-se nas seguintes etapas: concepcao; investigacao analitica; simulacoes numericas; validacao experimental and analise de desempenho em ambiente de laboratorio.
Abstract: Este trabalho tem por objetivo o desenvolvimento de dois defasadores de radiofrequencia (RF) ultra faixa larga baseados em fotonica para as faixas de micro-ondas e ondas milimetricas. Inicialmente, apresenta-se a tecnologia fotonica responsavel pela defasagem no dominio optico, capaz de viabilizar um ajuste de fase continuo e sintonizavel ao longo de uma ampla faixa de frequencia de RF. A metodologia de desenvolvimento dos defasadores de RF baseia-se nas seguintes etapas: concepcao; investigacao analitica; simulacoes numericas; validacao experimental e analise de desempenho em ambiente de laboratorio. As simulacoes computacionais foram conduzidas utilizando o software comercial OptiSystem e os experimentos foram realizados no Laboratorio WOCA (Wireless and Optical Convergent Access). Resultados numericos comprovam a eficiencia do defasador para a faixa de 10 a 100 GHz com amplitude e fase aproximadamente constantes. Ja os resultados experimentais demonstram a eficiencia do defasador para a faixa de 5,0 a 43,5 GHz.
1 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...Particularmente, para as redes 5G, tem-se proposto o uso de múltiplas bandas: uma banda de frequências abaixo de 6 GHz; outra com frequências superiores a 20 GHz, incluindo mm-waves [16][17]....
[...]
19 Sep 2022
TL;DR: The paper invokes realistic cell layouts, antenna patterns, and channel models trained from extensive ray tracing data to assess the performance of various network alternatives and considers the addition of dedicated uptilted rooftop-mounted cells for aerial coverage.
Abstract: 5G millimeter-wave (mmWave) cellular networks are in the early phase of commercial deployments and present a unique opportunity for robust, high-data-rate communication to unmanned aerial vehicles (UAVs). A fundamental question is whether and how mmWave networks designed for terrestrial users should be modified to serve UAVs. The paper invokes realistic cell layouts, antenna patterns, and channel models trained from extensive ray tracing data to assess the performance of various network alternatives. Importantly, the study considers the addition of dedicated uptilted rooftop-mounted cells for aerial coverage, as well as novel spectrum sharing modes between terrestrial and aerial network operators. The effect of power control and of multiuser multiple-input multiple-output are also studied.
1 citations
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]