Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: In this article , the authors explored the architectural changes in the cellular network architecture over the past few years and highlighted the advantages and additional challenges associated with these architectural changes, and pointed out the limits of previous studies and highlighted several open issues that require further investigation to build next-generation cellular communication technologies.
31 May 2022
TL;DR: In this paper , the authors proposed a wideband directive self-complementary bowtie antenna (SCBA) designed for the Ka-band, which is well suited for wireless power transfer and energy harvesting of compact devices.
Abstract: This paper presents a novel wideband directive self-complementary bowtie antenna (SCBA) designed for Ka-band. The proposed antenna is well suited for wireless power transfer and energy harvesting of compact devices using 5G frequencies. The proposed SCBA consists of self-complementary triangular elements and a ground plane, which are added to enhance directivity. The optimized design exhibits a wide impedance bandwidth that covers the entire Ka-band, despite the presence of a ground plane. The proposed SCBA was validated via simulation and measurement. The results demonstrate a bandwidth of 43.8% (25.8–40.1 GHz) and a maximum gain of 10.4 dBi at 29.5 GHz with a compact antenna size of 9.2 mm × 8.7 mm.
TL;DR: In this paper , the authors derive practical and tractable throughput and latency constraints using queueing theory and formulate a network utility maximization problem to evaluate both FD-IAB and half-duplex (HD)-IAB networks.
Abstract: Integrated access and backhaul (IAB) facilitates cost-effective deployment of millimeter wave (mmWave) cellular networks through multihop self-backhauling. Full-duplex (FD) technology, particularly for mmWave systems, is a potential means to overcome latency and throughput challenges faced by IAB networks. We derive practical and tractable throughput and latency constraints using queueing theory and formulate a network utility maximization problem to evaluate both full-duplex (FD)-IAB and half-duplex (HD)-IAB networks. We use this to characterize the network-level improvements seen when upgrading from conventional HD IAB nodes to FD ones by deriving closed-form expressions for (i) latency gain of FD-IAB over HD-IAB and (ii) the maximum number of hops that a HD- and FD-IAB network can support while satisfying latency and throughput targets. Extensive simulations illustrate that FD-IAB can facilitate reduced latency, higher throughput, deeper networks, and fairer service. Compared to HD-IAB, FD-IAB can improve throughput by $8\times $ and reduce latency by $4\times $ for a fourth-hop user. In fact, upgrading IAB nodes with FD capability can allow the network to support latency and throughput targets that its HD counterpart fundamentally cannot meet. The gains are more profound for users further from the donor and can be achieved even when residual self-interference is significantly above the noise floor.
Dissertation•
01 Oct 2019
TL;DR: This dissertation presents a meta-modelling system that automates the very labor-intensive and therefore time-heavy and expensive process of manually cataloging and cataloging individual components of a distributed system.
Abstract: University of Minnesota Ph.D. dissertation. October 2019. Major: Electrical/Computer Engineering. Advisor: Georgios Giannakis. 1 computer file (PDF); x, 116 pages.
01 Aug 2018
TL;DR: Results show that the performance of the proposed analog beamforming architecture is comparable to that of a fully digital beamforming scheme in terms of user throughput, on a realistic 5G system level platform simulating an urban environment.
Abstract: Millimeter wave (mmW) communication has been viewed as a way of offloading users from lower frequencies, where currently deployed cellular networks operate. The short wavelength of mmW frequencies allows for electrically large arrays to be deployed in small mobile devices. Electrically large arrays (in terms of wavelength) are needed in order to compensate for the high signal attenuation in mmW frequencies by means of transmit-receive beamforming. Two beamforming architectures are typically considered in practice, namely a fully digital solution in which every antenna has a dedicated radio frequency (RF) chain, and a so-called hybrid solution that consists of an analog beamforming stage prior to digital beamforming. Hybrid beamforming trades-off the versatility of a fully digital architecture for lower power-consumption and cost. In this paper we focus on fully analog beamforming architectures for circular arrays comprised of patch antennas. In particular, we propose two architectures for analog beamforming with circular arrays, and provide a detailed study regarding the number of simultaneously active beams (i.e, number of RF chains), the amount of antennas per beam, as well as the number of required phase-shifters. The proposed analog beamforming scheme is compared to a fully digital beamforming approach on a realistic 5G system level platform simulating an urban environment. Results show that the performance of the proposed analog beamforming architecture is comparable to that of a fully digital beamforming scheme in terms of user throughput.
Cites background or methods from "Millimeter-Wave Cellular Wireless N..."
...In particular, the mmW frequency band may provide coverage in urban street environments up to approximately 200m from a transmission/reception point (TRP), given that transmit and receive beamforming are used in order to accommodate for the high path-loss at such frequencies [1]....
[...]
...Exploitation of the mmW band (30-300 GHz) for cellular networks is expected to accommodate the ever growing demand for cellular data [1]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]