Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: In this article, the authors proposed a low-complexity single-carrier (SC)-based path-division multiple access (PDMA) scheme for the general wide-band frequency-selective channels.
Abstract: Millimeter wave (mm-wave) communication using lens antenna arrays is a promising technique for realizing cost-effective large multiple-input multiple-output (MIMO) systems with only limited radio frequency chains. This paper studies a multi-user mm-wave single-sided lens MIMO system, where the base station (BS) is equipped with a full-dimensional lens antenna array and each mobile station employs the conventional antenna arrays. By exploiting the angle-dependent energy focusing property of lens antenna array and the multi-path sparsity of mm-wave channels, we propose a low-complexity single-carrier (SC)-based path-division multiple access (PDMA) scheme for the general wide-band frequency-selective channels. To this end, a new technique called path delay compensation is proposed at the BS to transform the multi-user frequency-selective MIMO channels to parallel frequency-flat small-size MIMO channels. In addition, we propose an efficient channel estimation scheme tailored for the SC-based PDMA, which requires negligible training overhead in practical mm-wave systems and yet leads to comparable performance as that with perfect channel state information. Numerical results show that the proposed design achieves comparable performance as the state-of-the-art benchmark systems in terms of spectrum efficiency, but with significantly reduced hardware/power consumption cost and signal processing complexity.
61 citations
TL;DR: In this article, the authors proposed a framework for optimizing the operation and performance of a large-scale multi-hop mmW backhaul within a wireless small cell network having multiple mobile network operators (MNOs).
Abstract: In this paper, a novel framework is proposed for optimizing the operation and performance of a large-scale multi-hop millimeter wave (mmW) backhaul within a wireless small cell network having multiple mobile network operators (MNOs). The proposed framework enables the small base stations to jointly decide on forming the multi-hop, mmW links over backhaul infrastructure that belongs to multiple, independent MNOs, while properly allocating resources across those links. In this regard, the problem is addressed using a novel framework based on matching theory composed of two, highly inter-related stages: a multi-hop network formation stage and a resource management stage. One unique feature of this framework is that it jointly accounts for both wireless channel characteristics and economic factors during both network formation and resource management. The multi-hop network formation stage is formulated as a one-to-many matching game, which is solved using a novel algorithm, that builds on the so-called deferred acceptance algorithm and is shown to yield a stable and Pareto optimal multi-hop mmW backhaul network. Then, a one-to-many matching game is formulated to enable proper resource allocation across the formed multi-hop network. This game is then shown to exhibit peer effects and, as such, a novel algorithm is developed to find a stable and optimal resource management solution that can properly cope with these peer effects. Simulation results show that, with manageable complexity, the proposed framework yields substantial gains, in terms of the average sum rate, reaching up to 27% and 54%, respectively, compared with a non-cooperative scheme in which inter-operator sharing is not allowed and a random allocation approach. The results also show that our framework improves the statistics of the backhaul sum rate and provides insights on how to manage pricing and the cost of the cooperative mmW backhaul network for the MNOs.
61 citations
Posted Content•
TL;DR: In this article, the authors present a guide to the key challenges facing the deployment of this network scheme and contemplate the solutions being proposed for the main bottlenecks facing cell-free communications.
Abstract: Densification of network base stations is indispensable to achieve the stringent Quality of Service (QoS) requirements of future mobile networks. However, with a dense deployment of transmitters, interference management becomes an arduous task. To solve this issue, exploring radically new network architectures with intelligent coordination and cooperation capabilities is crucial. This survey paper investigates the emerging user-centric cell-free massive multiple-input multiple-output (MIMO) network architecture that sets a foundation for future mobile networks. Such networks use a dense deployment of distributed units (DUs) to serve users; the crucial difference from the traditional cellular paradigm is that a specific serving cluster of DUs is defined for each user. This framework provides macro diversity, power efficiency, interference management, and robust connectivity. Most importantly, the user-centric approach eliminates cell edges, thus contributing to uniform coverage and performance for users across the network area. We present here a guide to the key challenges facing the deployment of this network scheme and contemplate the solutions being proposed for the main bottlenecks facing cell-free communications. Specifically, we survey the literature targeting the fronthaul, then we scan the details of the channel estimation required, resource allocation, delay, and scalability issues. Furthermore, we highlight some technologies that can provide a management platform for this scheme such as distributed software-defined network (SDN) and self-organizing network (SON). Our article serves as a check point that delineates the current status and indicates future directions for this area in a comprehensive manner.
60 citations
TL;DR: In this paper, a dual-polarized broadband microstrip patch antenna for a 5G mmWave antenna module on an FR4 substrate is presented. But the proposed antenna was fabricated using a standard FR4 printed circuit board (PCB) process because of its low cost and ease of mass production.
Abstract: This study presents a dual polarized broadband microstrip patch antenna for a 5G mmWave antenna module on an FR4 substrate. The proposed antenna was fabricated using a standard FR4 printed circuit board (PCB) process because of its low cost and ease of mass production. The electrical properties of the FR4 substrate in the 5G mmWave frequency band were also characterized. An air cavity structure was introduced to mitigate the high loss tangent of the FR4 substrate. Capacitive elements such as proximity L-probe feedings and parasitic patches are used to improve the impedance bandwidth of the patch antenna. For the polarization diversity of the massive multiple-input multiple-output (MIMO) capability, the antenna radiator was designed with a symmetrical structure, and the relative position of the L-probes excites the orthogonal resonant modes to enable dual linear polarization. The operation principle of the proposed antenna was thoroughly analyzed by characteristic mode analysis (CMA). The measured bandwidth of a single antenna was 23.1 % (23 ~ 29 GHz) and the gain value was 5 dBi. The measured cross-polarization suppression ratio of single antenna was 15 ~ 20 dB. The measured gain value of $1\times 4$ antenna array was 10 ~ 11 dBi and the cross-polarization suppression ratio was about 20 dB. The size of the proposed single antenna is $0.41\lambda _{0}\times 0.41\lambda _{0}\times 0.1\lambda _{0}$ , and that of a $1\times 4$ antenna array is $2.78\lambda _{0}\times 0.41\lambda _{0}\times 0.1\lambda _{0}$ . The envelope correlation coefficient (ECC) was calculated and was lower than 0.02 in the 5G mmWave frequency band.
60 citations
TL;DR: This work identity and discuss the key elements for efficient resource allocation and management in CRAN, namely: user assignment, remote radio heads (RRH), throughput maximization, spectrum management, network utility, and power allocation.
59 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...On one hand, it has been suggested that mmWave propagation is more suitable for dense deployments scenarios [103] and on the other hand, CRAN can enable the deployment of denser cellular networks, leading to the mmWave CRAN [104]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]