Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges
05 Feb 2014-Vol. 102, Iss: 3, pp 366-385
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.
Citations
More filters
TL;DR: This study pinpoints varied subjects that need to be explored, such as joint efficient rules and regulations enactment, assessment of fairness and independence in multi-independent mobile network operators that support SSA, as well as the implementation of hybrid-SSA via Virtualized Cloud Radio Access Network.
Abstract: Fifth generation (5G) cellular networks promise to support multi-radio access technologies (multi-RATs) with low and high frequencies aiming at delivering good coverage, several gigabits data rate, and ultra-reliable services. In this context, user-association and resource allocation appear to be a huge challenge due to the variety of specifications and varied propagation environments. In this treatise, the focus is on the technical and administrative difficulties of the adoption of user association (UA) mechanism and spectrum sharing approach (SSA) in millimeter wave (mmWave) systems, for example, the technical design considerations and their underlying options, as well as their impact on users and network performance. In addition, details on the importance of the rules and regulations of SSA are presented. This study also identified a few possible design solutions and potential promising technologies in both UA and SSA. In the context of UA, several mechanisms are identified, such as backhaul-, caching-, and hybrid multi-criteria-aware UA to achieve seamless connectivity and to enhance the network utility. In the context of SSA, this study pinpoints varied subjects that need to be explored, such as joint efficient rules and regulations enactment, assessment of fairness and independence in multi-independent mobile network operators (multi-IMNOs) that support SSA, as well as the implementation of hybrid-SSA via Virtualized Cloud Radio Access Network. Finally, attention is drawn to several key conclusions to enable readers and interested researchers to learn about the most controversial points of mmWave 5G cellular networks.
50 citations
TL;DR: A system optimization model is formulated to minimize system power consumption, where UAV deployment and transmission power of UAV are jointly optimized by solving the optimization problem by dual decomposition method.
Abstract: In this paper, we study unmanned aerial vehicle (UAV) aided internet of things (IoT) networks, where UAVs facilitate data transmission of IoT devices. We focus on uplink transmission from IoT devices to base station (BS). Multiple UAVs are employed as UAV relays between IoT devices and BS to enhance received signal strength at BS. Specifically, IoT devices periodically detect wireless channel quality between IoT devices and BS, as well as that among IoT devices. Based on the wireless channel quality, we propose a distributed user cluster (UC) algorithm to cluster IoT devices as multiple UCs. One IoT device in a UC, which is named cluster head (CH), is selected to connect to the BS and gather uplink signals of IoT devices. If the wireless channel quality between CH and BS is good, a direct connection between CH and the BS can be built. Otherwise, UAVs are divided into multiple UAV cooperative relay clusters (CRCs). The UAVs in a CRC are located between a specific CH and BS to relay uplink signals. We then formulate a system optimization model to minimize system power consumption, where UAV deployment and transmission power of UAV are jointly optimized. We solve this optimization problem by dual decomposition method. By extensive simulations, we demonstrate the effectiveness of the proposed algorithm. We also reveal several interesting insights for practical UAV aided IoT networks.
50 citations
Cites methods from "Millimeter-Wave Cellular Wireless N..."
...In terms of the path loss, we employ the omnidirectional path loss of mmWave modeled in 5G wireless networks [37]....
[...]
TL;DR: An overview of the evolution of the cellular and Wi-Fi standards over the last decade is provided with a particular focus on the Medium Access Control and Physical layers, and the ongoing activities in both camps driven by the 5G requirements and use-cases are highlighted.
Abstract: We are on the brink of a new era for the wireless telecommunications, an era that will change the way that business is done. The fifth generation (5G) systems will be the first realization in this new digital era where the various networks will be interconnected forming a unified system. With support for higher capacity as well as low-delay and machine-type communication services, the 5G networks will significantly improve performance over the current fourth generation (4G) systems and will also offer seamless connectivity to numerous devices by integrating different technologies, intelligence, and flexibility. In addition to ongoing 5G standardization activities and technologies under consideration in the Third Generation Partnership Project (3GPP), the Institute of Electrical and Electronic Engineers (IEEE)-based technologies operating on unlicensed bands, will also be an integral part of a 5G eco-system. Along with the 3GPP-based cellular technology, the IEEE standards and technologies are also evolving to keep pace with the user demands and new 5G services. In this paper, we provide an overview of the evolution of the cellular and Wi-Fi standards over the last decade with a particular focus on the Medium Access Control and Physical layers, and highlight the ongoing activities in both camps driven by the 5G requirements and use-cases.
50 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...11 technology, the maximum number of users that can be accommodated is limited to 2007 due to AID range [1-2007]....
[...]
TL;DR: A novel strategy for SWIPT in which the transmitters have the option to either send a private or a common message, and the proposed schemes significantly outperform conventional schemes that transmit private messages only using digital beamforming.
Abstract: In this paper, we study simultaneous wireless information and power transfer (SWIPT) for Internet of Things (IoT) sensor networks. The transmitters (e.g., access point) employ hybrid beamforming and each IoT receiver adopts a power splitting (PS) method that divides the received signal into two parts for information recovery and energy harvesting. We propose a novel strategy for SWIPT in which the transmitters have the option to either send a private or a common message. The private message is recovered only by a designated IoT receiver while common messages are recovered by all the receivers. While requiring the receivers to recover a common message results in additional rate constraints, the overall system performance benefits by mitigating interference. We propose SWIPT schemes that minimize the total transmit power by properly selecting message configurations, designing hybrid beamforming vectors, and adjusting the PS ratio at the receivers to satisfy the individual rate and energy harvesting constraints. In particular, we develop tractable and efficient two-stage algorithms that, in the first stage determine the message configurations and in the second stage find the beamforming vectors (for both analog and digital components). Numerical simulations demonstrate that the proposed schemes significantly outperform conventional schemes that transmit private messages only using digital beamforming.
49 citations
TL;DR: A tractable linear program is determined whose solution yields an optimal routing, scheduling, and power control policy, when nodes have average-power constraints, and a decentralized policy obtained by simple truncation is near optimal as link capacities increase in a proportional way.
Abstract: We consider multihop networks serving multiple flows in which packets have hard deadlines. Packets not delivered to their destinations by their deadlines are of no value. The throughput of packets delivered within their deadlines is called the timely throughput. We address the design of packet scheduling, transmit power control, and routing policies that maximize any specified weighted average of the timely throughputs of the multiple flows. We determine a tractable linear program (LP) whose solution yields an optimal routing, scheduling, and power control policy, when nodes have average-power constraints. The optimal policy is fully decentralized, with decisions regarding any packet's transmission scheduling, transmit power level, and routing, based solely on the age and location of that packet. No knowledge of states of any other packets in the network is needed. This resolves a fundamental obstacle that arises whenever one attempts to optimally schedule networks. The number of variables in the LP is bounded by the product of the square of the number of nodes, the number of flows, the maximum relative deadline, and the number of transmit power levels. This solution is obtained from decomposition of the Lagrangian of the constrained Markov decision process describing the complete network state. Global coordination is achieved through a price for energy usage paid by a packet each time that its transmission is attempted at a node. It is fundamentally different from the decomposition of the fluid model used to derive the backpressure policy, which is throughput optimal when packets have no deadlines, where prices are related to queue lengths. If nodes instead have peak-power constraints, then a decentralized policy obtained by simple truncation is near optimal as link capacities increase in a proportional way.
49 citations
Cites background from "Millimeter-Wave Cellular Wireless N..."
...Transmissions in this millimeter wave band are directional and not subject to typical omnidirectional interference [2], but are subject to absorption....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Also, the human body and many outdoor materials being very reflective, allow them to be important scatterers for mmW propagation [28], [30]....
[...]
...However, these measurements were performed in an outdoor campus setting with much lower building density and greater opportunities for LOS connectivity than would be found in a typical urban deployment....
[...]
...Despite the potential of mmW cellular systems, there are a number of key challenges to realizing the vision of cellular networks in these bands: • Range and directional communication: Friis’ transmis- sion law [54] states that the free space omnidirectional path loss grows with the square of the…...
[...]
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
6,708 citations
"Millimeter-Wave Cellular Wireless N..." refers background or methods in this paper
...In both 28- and 73-GHz measurements, each point was classified as either being in a NLOS or LOS situation, based on a manual classification made at the time of the measurements; see [26] and [28]–[33]....
[...]
...• Empirical NYC: These curves are based on the omnidirectional path loss predicted by our linear model (1) for the mmW channel with the parameters from Table 1, as derived from the directional measurements in [26]....
[...]
...Details of the measurements can be found in [26], [28]– [33], [81]....
[...]
...This tremendous potential has led to considerable recent interest in mmW cellular both in industry [7]–[9], [18], [19] and academia [20]–[26], with a growing belief that mmW bands will play a significant role in beyond 4G and 5G cellular systems [27]....
[...]
...In particular, we survey our own measurements [26], [28]–[33] made in New York City (NYC) in both 28- and 73-GHz bands and the statistical models for the channels developed in [34]....
[...]
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17]....
[...]
TL;DR: In this article, the authors describe five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications.
Abstract: New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive MIMO, smarter devices, and native support for machine-to-machine communications. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.
3,711 citations
TL;DR: The technical and business arguments for femtocells are overview and the state of the art on each front is described and the technical challenges facing femtocell networks are described and some preliminary ideas for how to overcome them are given.
Abstract: The surest way to increase the system capacity of a wireless link is by getting the transmitter and receiver closer to each other, which creates the dual benefits of higher-quality links and more spatial reuse. In a network with nomadic users, this inevitably involves deploying more infrastructure, typically in the form of microcells, hot spots, distributed antennas, or relays. A less expensive alternative is the recent concept of femtocells - also called home base stations - which are data access points installed by home users to get better indoor voice and data coverage. In this article we overview the technical and business arguments for femtocells and describe the state of the art on each front. We also describe the technical challenges facing femtocell networks and give some preliminary ideas for how to overcome them.
3,298 citations
"Millimeter-Wave Cellular Wireless N..." refers background in this paper
...Heterogeneous networks, or HetNets, have been one of the most active research areas in cellular standards bodies in the last five years [45], [48], [67], [68], with the main focus being intercell interference coordination and load balancing....
[...]