Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Citations
More filters
TL;DR: A multiple-input multiple-output (MIMO) antenna system is proposed for fifth generation (5G) and fourth generation (4G) mobile communication that meets all of the requirements of both 5G and 4G antennas using only a single structure.
Abstract: A multiple-input multiple-output (MIMO) antenna system is proposed for fifth generation (5G) and fourth generation (4G) mobile communication. The design meets all of the requirements of both 5G and 4G antennas using only a single structure. Since 5G will work at millimeter-wave (mm-Wave), the proposed design serves triple bands at mm-Wave (28, 37 and 39 GHz) for 5G in addition to 2 GHz band (1.8–2.6) for 4G. Each MIMO element consists of a slot-based antenna, fed by two microstrip feeders for the 5G and 4G bands. The design works as a tapered slot antenna at mm-Wave offering end-fire radiation for 5G and works as an open-ended slot antenna for a 2 GHz band offering omni-direction radiation for 4G. The slot antenna type used in the proposed design produces wide bandwidths for the 5G and 4G. The overall volume of each MIMO antenna element is $0.21\times 0.10 \times 0.003\,\,\lambda ^{3}$ , where $\lambda $ is the wavelength of the lowest operating frequency. As a proof of concept, a prototype is developed and tested. The measured results show a wide impedance bandwidth of $|S_{11}| −10 dB covering the band 27.5–40 GHz for 5G, and impedance bandwidth of $|S_{11}| −6 dB covering the band 1.8–2.6 GHz for 4G.
66 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...In other words, the usage of multi-band antenna elements in the MIMO system is a key factor to reduce the antenna footprint inside the mobile terminal [5], [6], [8], [9]....
[...]
...Unfortunately, the current available bandwidth at sub-3 GHz is congested [5], thus, many international organizations assigned the millimeter wave band (mm-Wave), which includes 28, 37 and 39 GHz as a potential frequency band for 5G [6], [7]....
[...]
TL;DR: The body effect on the phased array in the UE at 15 GHz is investigated with the 3-D measurement data, and its impact on some key parameters for phased array for 5G communication, such as the total scan pattern, the coverage efficiency, and the probability of detection, are analyzed.
Abstract: The millimeter-wave phased array in the user equipment (UE) for 5G communication is studied in this letter. In particular, the body effect on the phased array in the UE at 15 GHz is investigated with the 3-D measurement data, and its impact on some key parameters for phased array in the UE, such as the total scan pattern, the coverage efficiency, and the probability of detection, are analyzed.
66 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...IN ORDER to extend the frequency spectrum for the nextgeneration cellular communication (5G), centimeter and millimeter-wave (mmWave) cellular system has become very attractive as the huge bandwidth benefit in this frequency range [1]....
[...]
TL;DR: A spatially consistent stochastic street-by-street PL model is established, and a parameterization for 28-GHz UMi cells is given that correctly describes the PL as a function of the street orientation as well as the large variance observed for all the PL model parameters.
Abstract: This paper considers a fundamental issue of path loss (PL) modeling in urban micro cell (UMi) environments, namely the spatial consistency of the model as the mobile station moves along a trajectory through street canyons. This paper is motivated by the observed non-stationarity of the PL. We show that the traditional model of power law PL plus log-normally distributed variations can provide misleading results that can have serious implications for system simulations. Rather, the PL parameters have to be modeled as random variables that change from street to street and also as a function of the street orientation. Variations of the PL, taken over the ensemble of the whole cell (or multiple cells), thus consist of the compound effect of these PL parameter variations together with the traditional shadowing variations along the trajectory of movement. Ray-tracing results demonstrate that ignoring this effect can lead to a severe overestimation of the local standard deviation in a given area. Then, a spatially consistent stochastic street-by-street PL model is established, and a parameterization for 28-GHz UMi cells is given. The model correctly describes the PL as a function of the street orientation as well as the large variance observed for all the PL model parameters.
66 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...This has led to renewed interest in mm-wave frequency bands and systems [2]–[4]....
[...]
...FREQUENCY bands above 6-GHz, including millimeterwave (mm-wave) bands, will play an important role in next-generation wireless communications (5G) systems, mostly due to the large amount of available bandwidth in this frequency range [2], [3]....
[...]
TL;DR: It is demonstrated that this intelligent tripple-fold adaptivity offers significant benefits in next-generation applications of mmWave and Terahertz solutions, in space-air-ground integrated networks, in full-duplex techniques and in other sophisticated channel coding assisted system designs, where powerful machine learning algorithms are expected to make autonomous decisions concerning the best mode of operation with minimal human intervention.
Abstract: Sixty years of coherent versus non-coherent tradeoff as well as the twenty years of coherent versus non-coherent tradeoff in Multiple-Input Multiple-Output (MIMO) systems are surveyed. Furthermore, the advantages of adaptivity are discussed. More explicitly, in order to support the diverse communication requirements of different applications in a unified platform, the 5G New Radio (NR) offers unprecendented adaptivity, abeit at the cost of a substantial amount of signalling overhead that consumes both power and the valuable spectral resources. Striking a beneficial coherent versus non-coherent tradeoff is capable of reducing the pilot overheads of channel estimation, whilst relying on low-complexity detectors, especially in high-mobility scenarios. Furthermore, since energy-efficiency is of salient importance both in the operational and future networks, following the powerful Index Modulation (IM) pholosophy, we conceive a holistic adaptive pholosophy striking the most appropriate coherent/non-coherent, single-/multiple-antenna and diversity/multiplexing tradeoffs, where the number of RF chains, the Peak-to-Average Power Ratio (PAPR) of signal transmission and the maximum amount of interference tolerated by signal detection are all taken into account. We demonstrate that this intelligent tripple-fold adaptivity offers significant benefits in next-generation applications of mmWave and Terahertz solutions, in space-air-ground integrated networks, in full-duplex techniques and in other sophisticated channel coding assisted system designs, where powerful machine learning algorithms are expected to make autonomous decisions concerning the best mode of operation with minimal human intervention.
66 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...29(a), while the mmWave FR2 K-band and Ka-band examples have 25.875 GHz and 38.5 GHz, respectively....
[...]
...The exemplified center frequencies of microwave FR1 UHF, L-band, S-band and C-band are given by 0.806 GHz, 1.4745 GHz, 2.593 GHz and 4.7 GHz, respectively, as seen in Fig....
[...]
...First of all, the highly-loaded UHF and L-band below 2 GHz are inherited by NR FR1 for the sake of wide, deep and ubiquitous coverage, where the FDD operations heavily rely on the disjoint narrow bands, as seen in Fig....
[...]
...Strictly speaking, the mmWave band ranges from 30 GHz to 300 GHz, where the corresponding wavelength range is between 1 mm and 10 mm....
[...]
...The term of mmWave commonly refers to FR2 (24.25∼52.6 GHz) in the 5G NR standards [105]–[107], which is adopted in this section....
[...]
01 Dec 2016
TL;DR: The spatial correlation of blockage statistics are analyzed and it is demonstrated that for realistic values of user speed, the angle of motion, height of transmitter and receiver, as well as the density of blockers, there always is a significant correlation between user channel states at time t0 and t1, across the time scales relevant for mmWave resource scheduling.
Abstract: Millimeter-wave (mmWave) systems suffer from a significant loss in performance when the line-of- sight (LoS) path between the transmitter and the receiver is obstructed due to blockage caused by humans or other obstacles. However, due to blocker or user motion, the mmWave receiver may transition between the LoS and non-LoS (nLoS) states. Following the recent 3GPP requirements on spatial consistency for channel modeling, this paper aims to analyze the spatial correlation of blockage statistics and characterize their evolution due to user mobility in a static field of blockers in urban mmWave systems. In particular, we derive conditional probabilities of residing in LoS or nLoS state at a given time t1, provided that a user was in LoS/nLoS state at a prior time t0. We demonstrate that for realistic values of user speed, the angle of motion, height of transmitter and receiver, as well as the density of blockers, there always is a significant correlation between user channel states at time t0 and t1, across the time scales relevant for mmWave resource scheduling. Hence, our model can serve as an important tool for optimizing system performance in the presence of blockage.
66 citations
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...Mm-wave frequencies, due to the much smaller wavelength, may exploit polarization and new spatial processing techniques, such as massive MIMO and adaptive beamforming [24]....
[...]
...Small cells offload traffic from base stations by overlaying a layer of small cell access points, which actually decreases the average distance between transmitters and users, resulting in lower propagation losses and higher data rates and energy efficiency [24]....
[...]
...Massive MIMO base stations allocate antenna arrays at existing macro base stations, which can accurately concentrate transmitted energy to the mobile users [24]....
[...]
TL;DR: Very large MIMO as mentioned in this paper is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation.
Abstract: This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.
2,717 citations
TL;DR: This article introduces a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system and demonstrates the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment.
Abstract: Almost all mobile communication systems today use spectrum in the range of 300 MHz-3 GHz. In this article, we reason why the wireless community should start looking at the 3-300 GHz spectrum for mobile broadband applications. We discuss propagation and device technology challenges associated with this band as well as its unique advantages for mobile communication. We introduce a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system. We demonstrate the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment. A few key concepts in MMB network architecture such as the MMB base station grid, MMB interBS backhaul link, and a hybrid MMB + 4G system are described. We also discuss beamforming techniques and the frame structure of the MMB air interface.
2,487 citations
"Millimeter Wave Mobile Communicatio..." refers background in this paper
...INTRODUCTION The rapid increase of mobile data growth and the use of smartphones are creating unprecedented challenges for wireless service providers to overcome a global bandwidth shortage [1], [2]....
[...]
...6 GHz radio spectrum bands for wireless communications [2]....
[...]
...With an evolution from fixed broadband to mobile broadband, more converged, personalized, convenient and seamless secure services will be achieved, and Samsung has recently made contributions in the area of mm-wave wireless [2], [12]....
[...]
01 Jan 2012
TL;DR: This leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC.
Abstract: For cellular radio engineers and technicians. The leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications. This book also contains up-to-date information on the major wireless communications standards from around the world. Covers every fundamental aspect of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC. Theodore Rappaport is Series Editor for the Prentice Hall Communication, Engineering, and Emerging Technologies Series.
1,813 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...In order to achieve increased measurement dynamic range for increased coverage distance, we used a sliding correlator spread spectrum system [5]....
[...]
...Current 2G, 3G, 4G, & LTE-A spectrum and bandwidth allocations [5]....
[...]