Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Citations
More filters
TL;DR: This paper designs and evaluates localization schemes that exploit the characteristics of mm-wave communication systems and proposes two range-free algorithms belonging to the broad classes of triangulation and angle difference of arrival, designed to be lightweight so that even computationally-constrained devices can run them.
Abstract: Millimeter-wave (mm-wave) location systems not only provide accurate positioning for location-based services but can also help optimize network operations, for example, through location-driven beam steering and access point association. In this paper, we design and evaluate localization schemes that exploit the characteristics of mm-wave communication systems. We propose two range-free algorithms belonging to the broad classes of triangulation and angle difference of arrival. The schemes work both with multiple anchors and with as few as a single anchor, under the only assumption that the floor plan and the positions of the mm-wave access points are known. Moreover, they are designed to be lightweight so that even computationally-constrained devices can run them. We evaluate our proposed algorithms against two benchmark approaches based on fingerprinting and angles of arrival, respectively. Our results, obtained both by means of simulations and through measurements involving commercial 60-GHz mm-wave devices, show that sub-meter accuracy is achieved in most of the cases, even in the presence of only a single access point. The availability of multiple access points substantially improves the localization accuracy, especially for large indoor spaces.
36 citations
Additional excerpts
...geometrical propagation assumptions [9]....
[...]
TL;DR: In this article, a new design of phased array antenna for future 5G mobile phone applications is presented, which consists of 12 dual-band circularly polarised antenna elements at 28/38 GHz used to form a linear array in the edges region.
Abstract: Here, a new design of phased-array antenna for future fifth-generation mobile phone applications is presented. The proposed phased array consists of 12 dual-band circularly polarised antenna elements at 28/38 GHz used to form a linear array in the edges region (top-side, right, and left sides) on a mobile phone circuit board. The measured and simulated results show that the designed antenna element has a reflection coefficient less than -15 dB in the assigned frequency bands of 28/38 GHz with a realised antenna gain of 7.68 and 7.73 dB, respectively. Furthermore, the performance of the array antenna package in the vicinity of user's head-hand has been investigated in this study at different scenarios. The designed array antenna achieved good matching impedance with high isolation between the array elements. Moreover, an acceptable realised gain of 16.85 dB on average with an axial ratio <;3 dB is obtained in the entire operation bands. Lastly, the metrics of total scan pattern, coverage efficiency, and user shadowing are investigated. It is found that the proposed phased-array antenna has good 3D beam-steering characteristics, which makes it suitable for millimetre-wave 5G mobile applications.
36 citations
TL;DR: In this article, the authors present a parasitic-aware design technique for the output network realized as a bandpass filter cascaded with or surrounded by a low-pass matching network.
Abstract: The design methodology and measurement results of a millimeter-wave harmonic-tuned power amplifier (PA) are presented. The PA uses optimum fundamental and second-harmonic terminations to achieve high peak power-added efficiency (PAE). We present a parasitic-aware design technique for the output network realized as a bandpass filter cascaded with or surrounded by a low-pass matching network. This technique demonstrates a method of manipulating the second-harmonic phase of a Chebyshev bandpass filter, while maintaining a suitable impedance match at the fundamental. The technique is applied to a 28-GHz PA in SiGe BiCMOS, which achieves 15.3-dB gain, 18.6-dBm saturated output power, 15.5-dBm output 1-dB compression point, and 35.3% peak PAE. When backed off 6- from 1-dB compression, the PA achieves 11.5% PAE with a third-order intermodulation product of −33.7 dBc.
36 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...I. INTRODUCTION MOBILE millimeter-wave (mm-wave) broadband sys-tems at 28 GHz have the potential to support highthroughput fifth-generation (5G) cellular networks [1]–[3]....
[...]
TL;DR: In this paper, the average rate and outage probability of a typical cell-edge user located at the origin were derived based on the stochastic geometry framework, and a Gamma approximation-based method was proposed to provide approximations with satisfying accuracy.
Abstract: Millimeter wave (mmWave) signals are much more sensitive to blockage, which results in a significant increase of the outage probability, especially for the users at the edge of the cells. In this paper, we exploit the technique of base station (BS) cooperation to improve the performance of the cell-edge users in the downlink transmission of mmWave cellular networks. We design two cooperative schemes, which are referred to as fixed-number BS cooperation (FNC) scheme and fixed-region BS cooperation (FRC) scheme, respectively. In the FNC scheme, the cooperative BSs consist of the $M$ nearest BSs around the served cell-edge users, and in the FRC scheme, the cooperative BSs include all the BSs located within a given region. We derive the expressions for the average rate and the outage probability of a typical cell-edge user located at the origin based on the stochastic geometry framework. To reduce the computational complexity of our analytical results for the outage probability, we further propose a Gamma approximation-based method to provide approximations with satisfying accuracy. Our analytical results incorporate the critical characteristics of mmWave channels, i.e., the blockage effects, the different path loss of LOS and NLOS links, and the highly directional antenna arrays. Simulation results show that the performance of the cell-edge users is greatly improved when mmWave networks are combined with the technique of BS cooperation.
36 citations
TL;DR: This paper proposes an efficient joint beam selection and precoding design algorithm based on the innovative penalty dual decomposition method that can converge in a few iterations and achieve near-optimal performance when compared to the fully digital precoding scheme, thus enabling them to outperform the competing methods.
Abstract: Wireless transmission relying on lens antenna arrays is becoming more and more attractive for millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems using a limited number of radio frequency chains due to the lens’ energy-focusing capability. In this paper, we consider the joint design of the beam selection and precoding matrices in order to maximize the sum-rate of a downlink single-sided lens MU-MIMO mmWave system under transmit power constraints. We first formulate the optimization problem into a tractable form using the popular weighted minimum mean squared error (WMMSE) approach. To solve this problem, we then propose an efficient joint beam selection and precoding design algorithm based on the innovative penalty dual decomposition method. To reduce the design complexity, we also propose a simplified algorithm by combining the interference-aware beam selection scheme with the WMMSE approach. Simulation results demonstrate that our proposed algorithms can converge in a few iterations and achieve near-optimal performance when compared to the fully digital precoding scheme, thus enabling them to outperform the competing methods.
36 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...The number of dominant scatters in a mmWave channel is quite limited [2]....
[...]
...As a remedy, communications over millimeter wave (mmWave) frequencies is expected to find its way into next generation cellular networks, allowing the latter to support unprecedented data rates in the 30–300 GHz band [2], [3]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...Mm-wave frequencies, due to the much smaller wavelength, may exploit polarization and new spatial processing techniques, such as massive MIMO and adaptive beamforming [24]....
[...]
...Small cells offload traffic from base stations by overlaying a layer of small cell access points, which actually decreases the average distance between transmitters and users, resulting in lower propagation losses and higher data rates and energy efficiency [24]....
[...]
...Massive MIMO base stations allocate antenna arrays at existing macro base stations, which can accurately concentrate transmitted energy to the mobile users [24]....
[...]
TL;DR: Very large MIMO as mentioned in this paper is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation.
Abstract: This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.
2,717 citations
TL;DR: This article introduces a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system and demonstrates the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment.
Abstract: Almost all mobile communication systems today use spectrum in the range of 300 MHz-3 GHz. In this article, we reason why the wireless community should start looking at the 3-300 GHz spectrum for mobile broadband applications. We discuss propagation and device technology challenges associated with this band as well as its unique advantages for mobile communication. We introduce a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system. We demonstrate the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment. A few key concepts in MMB network architecture such as the MMB base station grid, MMB interBS backhaul link, and a hybrid MMB + 4G system are described. We also discuss beamforming techniques and the frame structure of the MMB air interface.
2,487 citations
"Millimeter Wave Mobile Communicatio..." refers background in this paper
...INTRODUCTION The rapid increase of mobile data growth and the use of smartphones are creating unprecedented challenges for wireless service providers to overcome a global bandwidth shortage [1], [2]....
[...]
...6 GHz radio spectrum bands for wireless communications [2]....
[...]
...With an evolution from fixed broadband to mobile broadband, more converged, personalized, convenient and seamless secure services will be achieved, and Samsung has recently made contributions in the area of mm-wave wireless [2], [12]....
[...]
01 Jan 2012
TL;DR: This leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC.
Abstract: For cellular radio engineers and technicians. The leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications. This book also contains up-to-date information on the major wireless communications standards from around the world. Covers every fundamental aspect of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC. Theodore Rappaport is Series Editor for the Prentice Hall Communication, Engineering, and Emerging Technologies Series.
1,813 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...In order to achieve increased measurement dynamic range for increased coverage distance, we used a sliding correlator spread spectrum system [5]....
[...]
...Current 2G, 3G, 4G, & LTE-A spectrum and bandwidth allocations [5]....
[...]