Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Citations
More filters
TL;DR: In this article, a generalized hybrid architecture with a small number of radio frequency (RF) chains with full-resolution ADCs, or low-resolution ADC with a number of RF chains equal to the number of antennas is proposed.
Abstract: Hybrid analog/digital architectures and receivers with low-resolution analog-to-digital converters (ADCs) are two low power solutions for wireless systems with large antenna arrays, such as millimeter wave and massive multiple-input multiple-output systems. Most prior work represents two extreme cases in which either a small number of radio frequency (RF) chains with full-resolution ADCs, or low-resolution ADC with a number of RF chains equal to the number of antennas is assumed. In this paper, a generalized hybrid architecture with a small number of RF chains and a finite number of ADC bits is proposed. For this architecture, achievable rates with channel inversion and singular value decomposition-based transmission methods are derived. Results show that the achievable rate is comparable to that obtained by full-precision ADC receivers at low and medium SNRs. A trade-off between the achievable rate and power consumption for the different numbers of bits and RF chains is devised. This enables us to draw some conclusions on the number of ADC bits needed to maximize the system energy efficiency. Numerical simulations show that coarse ADC quantization is optimal under various system configurations. This means that hybrid combining with coarse quantization achieves better energy-rate trade-off compared with both hybrid combining with full-resolutions ADCs and 1-bit ADC combining.
219 citations
TL;DR: This paper proposes a directional cell discovery procedure where base stations periodically transmit synchronization signals, potentially in time-varying random directions, to scan the angular space and reveals two key findings: 1) digital beamforming can significantly outperform analog beamforming even whendigital beamforming uses very low quantization to compensate for the additional power requirements and 2) omnidirectional transmissions of the synchronization signals from the base station generally outperform random directional scanning.
Abstract: The acute disparity between increasing bandwidth demand and available spectrum has brought millimeter wave (mmWave) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for higher isotropic path loss. This reliance on directional beamforming, however, complicates initial cell search since mobiles and base stations must jointly search over a potentially large angular directional space to locate a suitable path to initiate communication. To address this problem, this paper proposes a directional cell discovery procedure where base stations periodically transmit synchronization signals, potentially in time-varying random directions, to scan the angular space. Detectors for these signals are derived based on a Generalized Likelihood Ratio Test (GLRT) under various signal and receiver assumptions. The detectors are then simulated under realistic design parameters and channels based on actual experimental measurements at 28 GHz in New York City. The study reveals two key findings: 1) digital beamforming can significantly outperform analog beamforming even when digital beamforming uses very low quantization to compensate for the additional power requirements and 2) omnidirectional transmissions of the synchronization signals from the base station generally outperform random directional scanning.
217 citations
Cites background or methods from "Millimeter Wave Mobile Communicatio..."
...Although we have derived our detectors based on a flat single path channel, we simulate the detectors’ performance both for a single path channel, as well as multipath pathloss channel model [8] derived from actual measurements in New York City [3], [26]–[29]....
[...]
...Extensive measurements in New York City [3], [26]–[29] revealed that in outdoor urban settings, the receiver can often see multiple macro-level scattering paths with significant angular spread....
[...]
...Although we have derived our detectors based on a flat single path channel, we simulate the detector’s performance both for a single path channel, as well as multipath channel model [7] derived from actual measurements in New York City....
[...]
...Extensive measurements in New York City [3], [21]– [23] revealed that in outdoor urban settings, the receiver can often see multiple macro-level scattering paths with significant angular spread....
[...]
...To validate the performance of our algorithm for these environments, we tested the algorithm under a realistic statistical spatial channel model [8] derived from the measurements in [3], [26]–[29]....
[...]
Posted Content•
TL;DR: It is shown that hybrid beamforming with a small number of radio frequency (RF) chains can asymptotically approach the performance of fully digital beamforming for a sufficiently large number of transceiver antennas due to the sparse nature of the mmWave channels.
Abstract: Hybrid analog and digital beamforming is a promising candidate for large-scale mmWave MIMO systems because of its ability to significantly reduce the hardware complexity of the conventional fully-digital beamforming schemes while being capable of approaching the performance of fully-digital schemes. Most of the prior work on hybrid beamforming considers narrowband channels. However, broadband systems such as mmWave systems are frequency-selective. In broadband systems, it is desirable to design common analog beamformer for the entire band while employing different digital beamformers in different frequency sub-bands. This paper considers hybrid beamforming design for systems with OFDM modulation. First, for a SU-MIMO system where the hybrid beamforming architecture is employed at both transmitter and receiver, we show that hybrid beamforming with a small number of RF chains can asymptotically approach the performance of fully-digital beamforming for a sufficiently large number of transceiver antennas due to the sparse nature of the mmWave channels. For systems with a practical number of antennas, we then propose a unified heuristic design for two different hybrid beamforming structures, the fully-connected and the partially-connected structures, to maximize the overall spectral efficiency of a mmWave MIMO system. Numerical results are provided to show that the proposed algorithm outperforms the existing hybrid beamforming methods and for the fully-connected architecture the proposed algorithm can achieve spectral efficiency very close to that of the optimal fully-digital beamforming but with much fewer RF chains. Second, for the MU-MISO case, we propose a heuristic hybrid percoding design to maximize the weighted sum rate in the downlink and show numerically that the proposed algorithm with practical number of RF chains can already approach the performance of fully-digital beamforming.
215 citations
Book•
14 Jun 2016TL;DR: An overview of mmWave vehicular communication with an emphasis on results on channel measurements, the physical PHY layer, and the medium access control MAC layer is provided, with special attention paid to identifying important topics of future research.
Abstract: Future vehicles will require massive sensing capability. Leveraging only onboard sensors, though, is challenging in crowded environments where the sensing field-of-view is obstructed. One potential solution is to share sensor data among the vehicles and infrastructure. This has the benefits of providing vehicles with an enhanced field-of-view and also additional redundancy to provide more reliability in the sensor data. A main challenge in sharing sensor data is providing the high data rates required to exchange raw sensor data. The large spectral channels at millimeter wave mmWave frequencies provide a means of achieving much higher data rates. This monograph provides an overview of mmWave vehicular communication with an emphasis on results on channel measurements, the physical PHY layer, and the medium access control MAC layer. The main objective is to summarize key findings in each area, with special attention paid to identifying important topics of future research. In addition to surveying existing work, some new simulation results are also presented to give insights on the effect of directionality and blockage, which are the two distinguishing features of mmWave vehicular channels. A main conclusion of this monograph is that given the renewed interest in high rate vehicle connectivity, many challenges remain in the design of a mmWave vehicular network.
215 citations
TL;DR: Results show that the answers to channel performance metrics, such as spectrum efficiency, coverage, hardware/signal processing requirements, etc., are extremely sensitive to the choice of channel models.
Abstract: Fifth-generation (5G) wireless networks are expected to operate at both microwave and millimeter-wave (mmWave) frequency bands, including frequencies in the range of 24 to 86 GHz. Radio propagation models are used to help engineers design, deploy, and compare candidate wireless technologies, and have a profound impact on the decisions of almost every aspect of wireless communications. This paper provides a comprehensive overview of the channel models that will likely be used in the design of 5G radio systems. We start with a discussion on the framework of channel models, which consists of classical models of path loss versus distance, large-scale, and small-scale fading models, and multiple-input multiple-output channel models. Then, key differences between mmWave and microwave channel models are presented, and two popular mmWave channel models are discussed: the 3rd Generation Partnership Project model, which is adopted by the International Telecommunication Union, and the NYUSIM model, which was developed from several years of field measurements in New York City. Examples on how to apply the channel models are then given for several diverse applications demonstrating the wide impact of the models and their parameter values, where the performance comparisons of the channel models are done with promising hybrid beamforming approaches, including leveraging coordinated multipoint transmission. These results show that the answers to channel performance metrics, such as spectrum efficiency, coverage, hardware/signal processing requirements, etc., are extremely sensitive to the choice of channel models.
213 citations
Cites methods from "Millimeter Wave Mobile Communicatio..."
...The main purpose of the 3GPP [11] and ITU statistical models [8], [27] is to enable simulations for 5G candidate technology evaluations, and, importantly, to include the effects of directional, steerable antennas that will be needed for practical mobile systems at mmWave frequencies [28], [29]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...Mm-wave frequencies, due to the much smaller wavelength, may exploit polarization and new spatial processing techniques, such as massive MIMO and adaptive beamforming [24]....
[...]
...Small cells offload traffic from base stations by overlaying a layer of small cell access points, which actually decreases the average distance between transmitters and users, resulting in lower propagation losses and higher data rates and energy efficiency [24]....
[...]
...Massive MIMO base stations allocate antenna arrays at existing macro base stations, which can accurately concentrate transmitted energy to the mobile users [24]....
[...]
TL;DR: Very large MIMO as mentioned in this paper is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation.
Abstract: This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.
2,717 citations
TL;DR: This article introduces a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system and demonstrates the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment.
Abstract: Almost all mobile communication systems today use spectrum in the range of 300 MHz-3 GHz. In this article, we reason why the wireless community should start looking at the 3-300 GHz spectrum for mobile broadband applications. We discuss propagation and device technology challenges associated with this band as well as its unique advantages for mobile communication. We introduce a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system. We demonstrate the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment. A few key concepts in MMB network architecture such as the MMB base station grid, MMB interBS backhaul link, and a hybrid MMB + 4G system are described. We also discuss beamforming techniques and the frame structure of the MMB air interface.
2,487 citations
"Millimeter Wave Mobile Communicatio..." refers background in this paper
...INTRODUCTION The rapid increase of mobile data growth and the use of smartphones are creating unprecedented challenges for wireless service providers to overcome a global bandwidth shortage [1], [2]....
[...]
...6 GHz radio spectrum bands for wireless communications [2]....
[...]
...With an evolution from fixed broadband to mobile broadband, more converged, personalized, convenient and seamless secure services will be achieved, and Samsung has recently made contributions in the area of mm-wave wireless [2], [12]....
[...]
01 Jan 2012
TL;DR: This leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC.
Abstract: For cellular radio engineers and technicians. The leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications. This book also contains up-to-date information on the major wireless communications standards from around the world. Covers every fundamental aspect of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC. Theodore Rappaport is Series Editor for the Prentice Hall Communication, Engineering, and Emerging Technologies Series.
1,813 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...In order to achieve increased measurement dynamic range for increased coverage distance, we used a sliding correlator spread spectrum system [5]....
[...]
...Current 2G, 3G, 4G, & LTE-A spectrum and bandwidth allocations [5]....
[...]