Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Citations
More filters
TL;DR: Without a dedicated decoupling structure, the MIMO antenna shows an excellent diversity performance in terms of isolation between antenna elements, envelope correlation coefficient, and channel capacity loss.
Abstract: This paper presents a metasurface-based single-layer low-profile circularly polarized (CP) antenna with the wideband operation and its multiple-input multiple-output (MIMO) configuration for fifth-generation (5G) communication systems. The antenna consists of a truncated corner patch and a metasurface (MS) of a 2 × 2 periodic square metallic plates. The distinguishing feature of this design is that all the radiating elements (radiator and MS) are printed on the single-layer of the dielectric substrate, which ensures the low-profile and low-cost features of the antenna while maintaining high gain and wideband characteristics. The wideband CP radiations are realized by exploiting surface-waves along the MS and its radiation mechanism is explained in detail. The single-layer antenna geometry has an overall compact size of 1.0λ
0
× 1.0λ
0
× 0.04λ
0
. Simulated and measured results show that the single-layer metasurface antenna has a wide 10 dB impedance bandwidth of 23.4 % (24.5 - 31 GHz) (23.4 %) and overlapping 3-dB axial ratio bandwidth of 16.8 % (25 - 29.6 GHz). The antenna also offers stable radiation patterns with a high radiation efficiency (>95%) and a flat gain of 11 dBic. Moreover, a 4-port (2 × 2) MIMO antenna is designed using the proposed design by placing each element perpendicular to each other. Without a dedicated decoupling structure, the MIMO antenna shows an excellent diversity performance in terms of isolation between antenna elements, envelope correlation coefficient, and channel capacity loss. Most importantly, the operational bandwidth of the antenna covers the millimeter-wave (mm-wave) band (25 - 29.5 GHz) assigned for 5G communication. These features of the proposed antenna system make it a suitable candidate for 5G smart devices and sensors.
109 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...tories, virtual reality, telemedicine, and automotive cars [2]....
[...]
TL;DR: Based on outdoor microcellular channel measurements at 32 GHz for 5G radio systems, a comprehensive channel modeling, simulation, and validation are performed and it is found that QuaDRiGa is a good platform at the mmWave band, even if it is originally developed for channel simulation below 6 GHz.
Abstract: In this paper, based on outdoor microcellular channel measurements at 32 GHz for 5G radio systems, a comprehensive channel modeling, simulation, and validation are performed. The directional-scan-sounding measurements using a horn antenna rotated with an angular step at the receiver are carried out, which constitutes a virtual array to form a single-input multiple-output radio channel. The directional- and omni-directional path-loss models are developed by using close-in and floating-intercept methods. Non-parametric and parametric methods are applied to extract large-scale channel parameters (LSPs). The non-parametric method is based on the definition of a channel parameter, whereas the parametric method is derived by the space-alternating generalized expectation–maximization (SAGE) algorithm, which can de-embed an antenna pattern. It is found that the LSPs in the angular domain are significantly different by using the two methods; however, the LSPs in the delay domain almost stay the same. By comparing the LSPs with the parameter table at 32 GHz with 3GPP standard, it is found that 3GPP LSPs should be corrected at the International Telecommunications Union-assigned millimeter wave (mmWave) frequencies for 5G. In this paper, the channel simulation is implemented by using the quasi-deterministic radio channel generator (QuaDRiGa) platform recommended by 3GPP. By comparing the LSPs with the simulated and measured results, it is found that QuaDRiGa is a good platform at the mmWave band, even if it is originally developed for channel simulation below 6 GHz. The results of this paper are important and useful in the simulations and design of future 5G radio systems at 32 GHz.
108 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...Millimeter Waves (mmWave) are regarded as the key frequency candidates for 5G, which can offer very high data rate in broadband mobile and backhaul services [2], [3]....
[...]
TL;DR: This paper proposes a cloud-based wireless network architecture with four components, i.e., mobile cloud, cloud- based radio access network (Cloud RAN), reconfigurable network and big data centre, which is capable of providing a virtualized, reconfigured, smart wireless network.
Abstract: In recent years, information communication and computation technologies are deeply converging, and various wireless access technologies have been successful in deployment. It can be predicted that the upcoming fifth generation mobile communication technology (5G) can no longer be defined by a single business model or a typical technical characteristic. 5G is a multi-service and multi-technology integrated network, meeting the future needs of a wide range of big data and the rapid development of numerous businesses, and enhancing the user experience by providing smart and customized services. In this paper, we propose a cloud-based wireless network architecture with four components, i.e., mobile cloud, cloud-based radio access network (Cloud RAN), reconfigurable network and big data centre, which is capable of providing a virtualized, reconfigurable, smart wireless network.
108 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...In addition, although some researchers have discussed how to construct the 5G network from multiple perspectives, such as air interface [7], millimeter wave [8, 9], and energy consumption [10], many of these studies focus on technical details, rarely constructing the whole system from the global perspective....
[...]
Posted Content•
TL;DR: A radar-assisted predictive beamforming design for vehicle-to-infrastructure (V2I) communication by exploiting the dual-functional radar-communication (DFRC) technique is investigated, showing that the proposed DFRC based beam tracking approach significantly outperforms the communication-only feedback based technique in the tracking performance.
Abstract: In vehicular networks of the future, sensing and communication functionalities will be intertwined. In this paper, we investigate a radar-assisted predictive beamforming design for vehicle-to-infrastructure (V2I) communication by exploiting the dual-functional radar-communication (DFRC) technique. Aiming for realizing joint sensing and communication functionalities at road side units (RSUs), we present a novel extended Kalman filtering (EKF) framework to track and predict kinematic parameters of each vehicle. By exploiting the radar functionality of the RSU we show that the communication beam tracking overheads can be drastically reduced. To improve the sensing accuracy while guaranteeing the downlink communication sum-rate, we further propose a power allocation scheme for multiple vehicles. Numerical results have shown that the proposed DFRC based beam tracking approach significantly outperforms the communication-only feedback based technique in the tracking performance. Furthermore, the designed power allocation method is able to achieve a favorable performance trade-off between sensing and communication.
108 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...To tackle the above issues in the safety-critical vehicular applications, the 5G technology, which exploits both the massive multi-input-multi-output (mMIMO) antenna array and the mmWave spectrum, is envisioned as a promising solution [5], [6]....
[...]
TL;DR: In this article, an extensive review of propagation characteristics and challenges related to the use of millimeter wave (mm-wave) in future wireless systems is presented, and the need for new multidimensional models and measurements is identified.
Abstract: The World Radiocommunication Conference 2015 (WRC-15) identified a number of frequency bands between 24 and 86 GHz as candidate frequencies for future cellular networks. In this article, an extensive review of propagation characteristics and challenges related to the use of millimeter wave (mm-wave) in future wireless systems is presented. Reference to existing path-loss models including atmospheric and material attenuation in recommendations of the International Telecommunication Union (ITU) in Geneva, Switzerland, is given, and the need for new multidimensional models and measurements is identified. A description of state-of-the-art mm-wave channel sounders for single and multiple antenna measurements is followed by a discussion of the most recent deterministic, semideterministic, and stochastic propagation and channel models. Finally, standardization issues are outlined with recommendations for future research.
107 citations
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...Mm-wave frequencies, due to the much smaller wavelength, may exploit polarization and new spatial processing techniques, such as massive MIMO and adaptive beamforming [24]....
[...]
...Small cells offload traffic from base stations by overlaying a layer of small cell access points, which actually decreases the average distance between transmitters and users, resulting in lower propagation losses and higher data rates and energy efficiency [24]....
[...]
...Massive MIMO base stations allocate antenna arrays at existing macro base stations, which can accurately concentrate transmitted energy to the mobile users [24]....
[...]
TL;DR: Very large MIMO as mentioned in this paper is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation.
Abstract: This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.
2,717 citations
TL;DR: This article introduces a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system and demonstrates the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment.
Abstract: Almost all mobile communication systems today use spectrum in the range of 300 MHz-3 GHz. In this article, we reason why the wireless community should start looking at the 3-300 GHz spectrum for mobile broadband applications. We discuss propagation and device technology challenges associated with this band as well as its unique advantages for mobile communication. We introduce a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system. We demonstrate the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment. A few key concepts in MMB network architecture such as the MMB base station grid, MMB interBS backhaul link, and a hybrid MMB + 4G system are described. We also discuss beamforming techniques and the frame structure of the MMB air interface.
2,487 citations
"Millimeter Wave Mobile Communicatio..." refers background in this paper
...INTRODUCTION The rapid increase of mobile data growth and the use of smartphones are creating unprecedented challenges for wireless service providers to overcome a global bandwidth shortage [1], [2]....
[...]
...6 GHz radio spectrum bands for wireless communications [2]....
[...]
...With an evolution from fixed broadband to mobile broadband, more converged, personalized, convenient and seamless secure services will be achieved, and Samsung has recently made contributions in the area of mm-wave wireless [2], [12]....
[...]
01 Jan 2012
TL;DR: This leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC.
Abstract: For cellular radio engineers and technicians. The leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications. This book also contains up-to-date information on the major wireless communications standards from around the world. Covers every fundamental aspect of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC. Theodore Rappaport is Series Editor for the Prentice Hall Communication, Engineering, and Emerging Technologies Series.
1,813 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...In order to achieve increased measurement dynamic range for increased coverage distance, we used a sliding correlator spread spectrum system [5]....
[...]
...Current 2G, 3G, 4G, & LTE-A spectrum and bandwidth allocations [5]....
[...]