Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
TL;DR: The motivation for new mm-wave cellular systems, methodology, and hardware for measurements are presented and a variety of measurement results are offered that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.
Citations
More filters
TL;DR: A “fully-connected” hybrid beamforming receiver that independently weights each element in an antenna array prior to separate downconversion chains that output independent baseband streams is presented.
Abstract: This paper presents a “fully-connected” hybrid beamforming receiver that independently weights each element in an antenna array prior to separate downconversion chains that output independent baseband streams. A receiver architecture is introduced, which implements RF-domain complex-valued Cartesian weighting, RF-domain combining, and multi-stream heterodyne complex-quadrature downconversion. Each RF-domain Cartesian weight is implemented by a pair of 5-bit digitally controlled programmable-gain amplifiers, whose outputs are combined with the weighted signals from other antennas prior to complex-quadrature downconversion. Signal combination is performed by a wideband small-footprint distributed active combiner. A 25–30 GHz hybrid beamforming receiver with eight antenna inputs and two baseband output streams is designed in 65-nm CMOS. In each antenna path, the receiver achieves 34-dB conversion gain, 7.3-dB minimum noise figure, and 5 GHz of RF bandwidth. The entire receiver consumes 340 mW (equivalent to 27.5 mW per antenna per stream) including low-noise amplification, RF-domain beamforming, multi-stream downconversion, and local oscillator generation and distribution circuitry. The receiver occupies 3.86 mm2 excluding pads, equivalent to 0.36 mm2 per antenna per stream. Single-element characterization results are presented, along with characterization of several spatial processing techniques including interference cancellation (20 dB peak to null for two elements), simultaneous two-stream reception, and adaptive-codebook-search-based beam acquisition.
87 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...Recent channel propagation measurements [1] and advances in low-cost, high-performance silicon hardware [2]–[5] in the millimeter-wave bands are driving the...
[...]
02 Nov 2015
TL;DR: The main focus of this work is the modeling of customizable channel, physical and medium access control layers for mmWave systems, based on the network simulator ns-3, which aims at providing the first of a kind open source mmWave framework.
Abstract: The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and more sensitive to obstacles. The resulting key aspects that need to be taken into account when designing mmWave cellular systems are directionality and link intermittency. The lack of network level results motivated this work, which aims at providing the first of a kind open source mmWave framework, based on the network simulator ns-3. The main focus of this work is the modeling of customizable channel, physical (PHY) and medium access control (MAC) layers for mmWave systems. The overall design and architecture of the model are discussed in details. Finally, the validity of our proposed framework is corroborated through the simulation of a simple scenario.
87 citations
09 Apr 2018
TL;DR: This paper provides a simple, yet accurate absorption model, which can be utilized to predict the absorption loss at the above frequency band and is shown to be very accurate below one kilometer link distances.
Abstract: This paper focuses on giving a simplified molecular absorption loss model for a 275–400 GHz frequency band, which has significant potential for variety of future short and medium range communications. The band offers large theoretical data rates with reasonable path loss to theoretically allow even up to kilometer long link distances when sufficiently high gain antennas are used. The molecular absorption loss in the band requires a large number of parameters from spectroscopic databases, and, thus, the exact modeling of its propagation characteristics is demanding. In this paper, we provide a simple, yet accurate absorption model, which can be utilized to predict the absorption loss at the above frequency band. The model is valid at a regular atmospheric pressure, it depends on the distance, the relative humidity, and the frequency. The existing simplified model by ITU does not cover frequencies above 350 GHz and has more complexity than our proposed model. The molecular absorption loss increases exponentially with the distance, decreasing the utilizable bandwidth in the vicinity of the absorption lines. We provide a model to approximate the window widths at the above frequency band. This model depends on the distance, the relative humidity, the frequency, and the maximum tolerable loss. It is shown to be very accurate below one kilometer link distances.
86 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...The millimeter wave frequency band (mm-wave, 30–300 GHz) is of interest for future wireless communications systems and applications, such as 5G and beyond [1]....
[...]
TL;DR: The fundamental and advanced topologies of reflectarray design implementations, which are needed particularly for its broadband features, are surveyed.
Abstract: The advancement in the current communication technology makes it incumbent to analyze the conventional features of reflectarray antenna for future adaptability. This paper thoroughly reviews the design and experimental features of reflectarray antenna for its bandwidth improvement in microwave and millimeter wave frequency ranges. The paper surveys the fundamental and advanced topologies of reflectarray design implementations, which are needed particularly for its broadband features. The realization of its design approaches has been studied at unit cell and full reflectarray levels for its bandwidth enhancement. Various design configurations have also been critically analyzed for the compatibility with the high-frequency 5G systems.
86 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...Considering the importance of mm-waves [9], recently in World Radiocommunication Conference (WRC-15) 5G frequency bands were allocated on primary basis for future developments [10]....
[...]
TL;DR: In this paper, a frequency beam scanning slotted leaky-wave magnetoelectric (ME) dipole antenna array for the 5G application is presented. But the antenna is not designed to operate at the 28 GHz band.
Abstract: This paper presents a novel frequency beam scanning slotted leaky-wave magnetoelectric (ME) dipole antenna array for the fifth generation (5G) application. The proposed antenna, which has eighteen elements of slots and electric dipoles, is built on a two-layer printed circuit board. In the lower layer, it is a conventional slotted substrate integrated waveguide (SIW) leaky-wave antenna (LWA). In the upper layer, electric dipoles are attached to the design. As for each element unit, the magnetic dipole is realized by each lower-layer aperture, while the electric dipole is realized by each pair of patches in the upper layer. The design concept is that two modes are excited together in orthogonal directions to realize the ME dipole. By introducing electric dipoles to the conventional slotted LWA, the antenna exhibits less gain variation over a wide bandwidth. The SIW leaky-wave ME dipole antenna array is designed and fabricated to operate at the 28-GHz band. It operates with wide impedance bandwidth and a peak gain of 16.55 dBi with less than 3-dB gain variation throughout the frequency range from 27 to 32 GHz.
86 citations
Cites background from "Millimeter Wave Mobile Communicatio..."
...Rappaport from New York University has already demonstrated that 5G cellular will work by using 28and 38-GHz frequencies [1]....
[...]
References
More filters
Book•
15 Jan 1996
TL;DR: WireWireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design as discussed by the authors, which covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs).
Abstract: From the Publisher:
The indispensable guide to wireless communicationsnow fully revised and updated!
Wireless Communications: Principles and Practice, Second Edition is the definitive modern text for wireless communications technology and system design. Building on his classic first edition, Theodore S. Rappaport covers the fundamental issues impacting all wireless networks and reviews virtually every important new wireless standard and technological development, offering especially comprehensive coverage of the 3G systems and wireless local area networks (WLANs) that will transform communications in the coming years. Rappaport illustrates each key concept with practical examples, thoroughly explained and solved step by step.
Coverage includes:
An overview of key wireless technologies: voice, data, cordless, paging, fixed and mobile broadband wireless systems, and beyond
Wireless system design fundamentals: channel assignment, handoffs, trunking efficiency, interference, frequency reuse, capacity planning, large-scale fading, and more
Path loss, small-scale fading, multipath, reflection, diffraction, scattering, shadowing, spatial-temporal channel modeling, and microcell/indoor propagation
Modulation, equalization, diversity, channel coding, and speech coding
New wireless LAN technologies: IEEE 802.11a/b, HIPERLAN, BRAN, and other alternatives
New 3G air interface standards, including W-CDMA, cdma2000, GPRS, UMTS, and EDGE
Bluetooth wearable computers, fixed wireless and Local Multipoint Distribution Service (LMDS), and other advanced technologies
Updated glossary of abbreviations and acronyms, and a thorolist of references
Dozens of new examples and end-of-chapter problems
Whether you're a communications/network professional, manager, researcher, or student, Wireless Communications: Principles and Practice, Second Edition gives you an in-depth understanding of the state of the art in wireless technologytoday's and tomorrow's.
17,102 citations
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...Mm-wave frequencies, due to the much smaller wavelength, may exploit polarization and new spatial processing techniques, such as massive MIMO and adaptive beamforming [24]....
[...]
...Small cells offload traffic from base stations by overlaying a layer of small cell access points, which actually decreases the average distance between transmitters and users, resulting in lower propagation losses and higher data rates and energy efficiency [24]....
[...]
...Massive MIMO base stations allocate antenna arrays at existing macro base stations, which can accurately concentrate transmitted energy to the mobile users [24]....
[...]
TL;DR: Very large MIMO as mentioned in this paper is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation.
Abstract: This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.
2,717 citations
TL;DR: This article introduces a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system and demonstrates the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment.
Abstract: Almost all mobile communication systems today use spectrum in the range of 300 MHz-3 GHz. In this article, we reason why the wireless community should start looking at the 3-300 GHz spectrum for mobile broadband applications. We discuss propagation and device technology challenges associated with this band as well as its unique advantages for mobile communication. We introduce a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system. We demonstrate the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment. A few key concepts in MMB network architecture such as the MMB base station grid, MMB interBS backhaul link, and a hybrid MMB + 4G system are described. We also discuss beamforming techniques and the frame structure of the MMB air interface.
2,487 citations
"Millimeter Wave Mobile Communicatio..." refers background in this paper
...INTRODUCTION The rapid increase of mobile data growth and the use of smartphones are creating unprecedented challenges for wireless service providers to overcome a global bandwidth shortage [1], [2]....
[...]
...6 GHz radio spectrum bands for wireless communications [2]....
[...]
...With an evolution from fixed broadband to mobile broadband, more converged, personalized, convenient and seamless secure services will be achieved, and Samsung has recently made contributions in the area of mm-wave wireless [2], [12]....
[...]
01 Jan 2012
TL;DR: This leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC.
Abstract: For cellular radio engineers and technicians. The leading book on wireless communications offers a wealth of practical information on the implementation realities of wireless communications. This book also contains up-to-date information on the major wireless communications standards from around the world. Covers every fundamental aspect of wireless communications, from cellular system design to networking, plus world-wide standards, including ETACS, GSM, and PDC. Theodore Rappaport is Series Editor for the Prentice Hall Communication, Engineering, and Emerging Technologies Series.
1,813 citations
"Millimeter Wave Mobile Communicatio..." refers background or methods in this paper
...In order to achieve increased measurement dynamic range for increased coverage distance, we used a sliding correlator spread spectrum system [5]....
[...]
...Current 2G, 3G, 4G, & LTE-A spectrum and bandwidth allocations [5]....
[...]