Modulating Local Charge Distribution of Carbon Nitride for Promoting Exciton Dissociation and Charge-Induced Reactions
TL;DR: In this paper, the authors showed that by introducing amino-cyano functional groups into carbon nitride, the excitons can be effectively dissociated into electrons and holes by finely controlling the charge distribution of heptazine ring.
Abstract: The sustainable light can generate reduction and oxidation centers in situ through the generation of photoexcited electrons and holes in the presence of photocatalyst. However, the photoexcited electrons and holes have huge Coulombic attraction and high exciton binding energy due to the weak screening effect and dielectric properties in many low-dimensional conjugated polymers, such as carbon nitride. Reducing the exciton binding energy of carbon nitride and promoting the conversion of excitons into free charge carriers are necessary for improving the activity of photocatalytic reactions but still very challenging. Here, by introducing amino-cyano functional groups into carbon nitride, it is demonstrated that excitons can be effectively dissociated into electrons and holes by finely controlling the charge distribution of heptazine ring. It is found that carbon nitride with heptazine rings of positive charge distribution can greatly reduce the exciton binding energy to 24 from 71 meV. Compared with heptazine ring having negative charge distribution, heptazine ring with positive charge distribution can increase photocatalytic hydrogen production of carbon nitride by up to ten times. This work provides an easy way to promote the dissociation of excitons in carbon nitride by regulating the charge distribution.
Citations
More filters
TL;DR: In this paper , a sp2-carbon-linked triazine-based COF, COF-JLU100, was synthesized for solar-driven photocatalytic hydrogen evolution.
Abstract: Two-dimensional covalent organic frameworks (2D-COFs) have emerged as attractive platforms for solar-to-chemical energy conversion. In this study, we have implemented a gradient heating strategy to synthesize a sp2-carbon-linked triazine-based COF, COF-JLU100, exhibiting high crystallinity, large surface area, good durability and carrier mobility for solar-driven photocatalytic hydrogen evolution. The Pt-doped COF-JLU100 demonstrated a high hydrogen evolution rate of over 100,000 µmol g-1 h-1 for water splitting under visible-light illumination (λ > 420 nm). Experimental and theoretical studies corroborate that the cyano-vinylene segments in COF-JLU100 extend the π-delocalization and enable fast charge transfer and separation rates as well as good dispersion in water. Moreover, COF-JLU100 can be prepared by low-cost and easily available monomers and has excellent stability, which is desirable for practical solar-driven hydrogen production.
35 citations
TL;DR: In this article , two photoactive three-component donor-π-acceptor (TCDA) materials were constructed using a multicomponent synthesis strategy by introducing electron-deficient triazine and electron-rich benzotrithiophene moieties into frameworks through sp2 carbon and imine linkages, respectively.
Abstract: Two-dimensional covalent-organic frameworks (2D COFs) have recently emerged as great prospects for their applications as new photocatalytic platforms in solar-to-hydrogen conversion; nevertheless, their inefficient solar energy capture and fast charge recombination hinder the improvement of photocatalytic hydrogen production performance. Herein, two photoactive three-component donor-π-acceptor (TCDA) materials were constructed using a multicomponent synthesis strategy by introducing electron-deficient triazine and electron-rich benzotrithiophene moieties into frameworks through sp2 carbon and imine linkages, respectively. Compared with two-component COFs, the novel TCDA-COFs are more convenient in regulating the inherent photophysical properties, thereby realizing outstanding photocatalytic activity for hydrogen evolution from water. Remarkably, the first sp2 carbon-linked TCDA-COF displays an impressive hydrogen evolution rate of 70.8 ± 1.9 mmol g-1 h-1 with excellent reusability in the presence of 1 wt % Pt under visible-light illumination (420-780 nm). Utilizing the combination of diversified spectroscopy and theoretical prediction, we show that the full π-conjugated linkage not only effectively broadens the visible-light harvesting of COFs but also enhances charge transfer and separation efficiency.
8 citations
TL;DR: In this paper , a facile hydrothermal method was developed to prepare heterogeneous photocatalyst constructed by decorating nanorod-assembled orbicular WO3·0.5 H2O on the surface of porous carbon nitride nanosheets.
5 citations
TL;DR: In this article , single-atom Co was loaded on crystalline g-C3N4 (CCN) nanorod in the form of five-coordination (Co-N4-O) at the heptazine cavities.
5 citations
TL;DR: In this article, a facile hydrothermal method was developed to prepare heterogeneous photocatalyst constructed by decorating nanorod-assembled orbicular WO3·0.5H2O on the surface of porous carbon nitride nanosheets.
5 citations
References
More filters
TL;DR: It is shown that an abundant material, polymeric carbon nitride, can produce hydrogen from water under visible-light irradiation in the presence of a sacrificial donor.
Abstract: The production of hydrogen from water using a catalyst and solar energy is an ideal future energy source, independent of fossil reserves. For an economical use of water and solar energy, catalysts that are sufficiently efficient, stable, inexpensive and capable of harvesting light are required. Here, we show that an abundant material, polymeric carbon nitride, can produce hydrogen from water under visible-light irradiation in the presence of a sacrificial donor. Contrary to other conducting polymer semiconductors, carbon nitride is chemically and thermally stable and does not rely on complicated device manufacturing. The results represent an important first step towards photosynthesis in general where artificial conjugated polymer semiconductors can be used as energy transducers.
9,751 citations
TL;DR: This critical review shows the basis of photocatalytic water splitting and experimental points, and surveys heterogeneous photocatalyst materials for water splitting into H2 and O2, and H2 or O2 evolution from an aqueous solution containing a sacrificial reagent.
Abstract: This critical review shows the basis of photocatalytic water splitting and experimental points, and surveys heterogeneous photocatalyst materials for water splitting into H2 and O2, and H2 or O2 evolution from an aqueous solution containing a sacrificial reagent Many oxides consisting of metal cations with d0 and d10 configurations, metal (oxy)sulfide and metal (oxy)nitride photocatalysts have been reported, especially during the latest decade The fruitful photocatalyst library gives important information on factors affecting photocatalytic performances and design of new materials Photocatalytic water splitting and H2 evolution using abundant compounds as electron donors are expected to contribute to construction of a clean and simple system for solar hydrogen production, and a solution of global energy and environmental issues in the future (361 references)
8,850 citations
TL;DR: The conversion of these bench stable, benign catalysts to redox-active species upon irradiation with simple household lightbulbs represents a remarkably chemoselective trigger to induce unique and valuable catalytic processes.
Abstract: A fundamental aim in the field of catalysis is the development of new modes of small molecule activation. One approach toward the catalytic activation of organic molecules that has received much attention recently is visible light photoredox catalysis. In a general sense, this approach relies on the ability of metal complexes and organic dyes to engage in single-electron-transfer (SET) processes with organic substrates upon photoexcitation with visible light.
Many of the most commonly employed visible light photocatalysts are polypyridyl complexes of ruthenium and iridium, and are typified by the complex tris(2,2′-bipyridine) ruthenium(II), or Ru(bpy)32+ (Figure 1). These complexes absorb light in the visible region of the electromagnetic spectrum to give stable, long-lived photoexcited states.1,2 The lifetime of the excited species is sufficiently long (1100 ns for Ru(bpy)32+) that it may engage in bimolecular electron-transfer reactions in competition with deactivation pathways.3 Although these species are poor single-electron oxidants and reductants in the ground state, excitation of an electron affords excited states that are very potent single-electron-transfer reagents. Importantly, the conversion of these bench stable, benign catalysts to redox-active species upon irradiation with simple household lightbulbs represents a remarkably chemoselective trigger to induce unique and valuable catalytic processes.
Open in a separate window
Figure 1
Ruthenium polypyridyl complexes: versatile visible light photocatalysts.
6,252 citations
TL;DR: It is anticipated that this review can stimulate a new research doorway to facilitate the next generation of g-C3N4-based photocatalysts with ameliorated performances by harnessing the outstanding structural, electronic, and optical properties for the development of a sustainable future without environmental detriment.
Abstract: As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...
5,054 citations
TL;DR: This paper presents a meta-analyses of the chiral stationary phase transition of Na6(CO3)(SO4)2, Na2SO4, and Na2CO3 of the Na2O/Na2O 2 mixture at the stationary phase and shows clear patterns in the response of these two materials to each other.
Abstract: Jenny Schneider,*,† Masaya Matsuoka,‡ Masato Takeuchi,‡ Jinlong Zhang, Yu Horiuchi,‡ Masakazu Anpo,‡ and Detlef W. Bahnemann*,† †Institut fur Technische Chemie, Leibniz Universitaẗ Hannover, Callinstrasse 3, D-30167 Hannover, Germany ‡Faculty of Engineering, Osaka Prefecture University, 1 Gakuen-cho, Sakai Osaka 599-8531, Japan Key Lab for Advanced Materials and Institute of Fine Chemicals, East China University of Science and Technology, Shanghai 200237, China
4,353 citations