Nanomaterial-Based Biosensors for Food Toxin Detection
TL;DR: Some of the recent results related to fabrication of nanomaterial-based biosensors for food toxin detection obtained in the laboratories will be focused on.
Abstract: There is an increased interest toward the development of bioelectronic devices for food toxin (mycotoxins) detection. Mycotoxins are highly toxic secondary metabolites produced by fungi like Fusarium, Aspergillus, and Penicillium that are frequently found in crops or during storage of food including cereals, nuts, fruits, etc. The contamination of food by mycotoxins has become a matter of increasing concern. High levels of mycotoxins in the diet can cause adverse, acute, and chronic effects on human health and a variety of animal species. Side effects may particularly affect the liver, kidney, nervous system, endocrine system, and immune system. Among 300 mycotoxins known till date, there are a few that are considered to play an important part in food safety, and for these, a range of analytical methods have been developed. Some of the important mycotoxins include aflatoxins, ochratoxins, fumonisins, citreoviridin, patulin, citrinin, and zearalenon. The conventional methods of analysis of mycotoxins normally require sophisticated instrumentation, e.g., liquid chromatography with fluorescence or mass detectors, combined with extraction procedures for sample preparation. Hence, new analysis tools are necessary to attain more sensitive, specific, rapid, and reliable information about the desired toxin. For the last about two decades, the research and development of simpler and faster analytical procedures based on affinity biosensors has aroused much interest due to their simplicity and sensitivity. The nanomaterials have recently had a great impact on the development of biosensors. The functionalized nanomaterials are used as catalytic tools, immobilization platforms, or as optical or electroactive labels to improve the biosensing performance to obtain higher sensitivity, stability, and selectivity. Nanomaterials, such as carbon nanomaterials (carbon nanotubes and graphene), metal nanoparticles, nanowires, nanocomposites, and nanostructured metal oxide nanoparticles are playing an increasing role in the design of sensing and biosensing systems for mycotoxin determination. Furthermore, these nanobiosystems are also bringing advantages in terms of the design of novel food toxin detection strategies. We will focus on some of the recent results related to fabrication of nanomaterial-based biosensors for food toxin detection obtained in our laboratories.
Citations
More filters
TL;DR: An overview of the electrochemical biosensors that have incorporated carbon and metal nanomaterials in their configurations for the detection of toxins and the roles, methods and advantages they provide to the analyses are summarised.
160 citations
TL;DR: This review discusses recent graphene (GR) electrochemical biosensor for accurate detection of biomolecules through effective immobilization of enzymes, including glucose oxidase, horseradish peroxidase, and haemoglobin.
152 citations
TL;DR: This review provides an overview of recent developments in electrochemical sensors and biosensors employed for the detection of mycotoxins and the development of different molecular recognition elements and nanomaterials required.
150 citations
TL;DR: N nanoparticle-based electrochemical, piezoelectric, optical, and immunodipstick assays for aflatoxins have been developed and novel concepts and promising applications in the field of food safety are illustrated.
119 citations
Cites background from "Nanomaterial-Based Biosensors for F..."
...large surface area and high electrical/thermal conductivity.[98] CNTs can be divided into single211 walled and multi-walled structures....
[...]
TL;DR: The BPE-ECL aptasensor was successfully used to detect AFM1 in milk complex media without any serious interferences with reliable reproducibility and opens a new horizon for bioanalysis that does not require a trained technician to operate and is a promising technology for point-of-care testing.
115 citations
References
More filters
TL;DR: Monocrystalline graphitic films are found to be a two-dimensional semimetal with a tiny overlap between valence and conductance bands and they exhibit a strong ambipolar electric field effect.
Abstract: We describe monocrystalline graphitic films, which are a few atoms thick but are nonetheless stable under ambient conditions, metallic, and of remarkably high quality. The films are found to be a two-dimensional semimetal with a tiny overlap between valence and conductance bands, and they exhibit a strong ambipolar electric field effect such that electrons and holes in concentrations up to 10 13 per square centimeter and with room-temperature mobilities of ∼10,000 square centimeters per volt-second can be induced by applying gate voltage.
55,532 citations
TL;DR: This review will be of value to synthetic chemists interested in this emerging field of materials science, as well as those investigating applications of graphene who would find a more thorough treatment of the chemistry of graphene oxide useful in understanding the scope and limitations of current approaches which utilize this material.
Abstract: The chemistry of graphene oxide is discussed in this critical review Particular emphasis is directed toward the synthesis of graphene oxide, as well as its structure Graphene oxide as a substrate for a variety of chemical transformations, including its reduction to graphene-like materials, is also discussed This review will be of value to synthetic chemists interested in this emerging field of materials science, as well as those investigating applications of graphene who would find a more thorough treatment of the chemistry of graphene oxide useful in understanding the scope and limitations of current approaches which utilize this material (91 references)
10,126 citations
"Nanomaterial-Based Biosensors for F..." refers background in this paper
...GO has several captivating properties that offer several advantages over pure graphene for sensing and biosensing application [32]....
[...]
...However, GO possesses a monolayer or just a few stacked layers, while graphite oxide contains large number of stacked layers [32]....
[...]
TL;DR: The use of colloidal suspensions to produce new materials composed of graphene and chemically modified graphene is reviewed, which is both versatile and scalable, and is adaptable to a wide variety of applications.
Abstract: Interest in graphene centres on its excellent mechanical, electrical, thermal and optical properties, its very high specific surface area, and our ability to influence these properties through chemical functionalization. There are a number of methods for generating graphene and chemically modified graphene from graphite and derivatives of graphite, each with different advantages and disadvantages. Here we review the use of colloidal suspensions to produce new materials composed of graphene and chemically modified graphene. This approach is both versatile and scalable, and is adaptable to a wide variety of applications.
6,178 citations
"Nanomaterial-Based Biosensors for F..." refers methods in this paper
...Hence, it has been used as a source material for graphene synthesis by suitable reduction techniques [31]....
[...]
TL;DR: This tutorial review provides a brief summary of recent research progress on carbon-based electrode materials forsupercapacitors, as well as the importance of electrolytes in the development of supercapacitor technology.
Abstract: This tutorial review provides a brief summary of recent research progress on carbon-based electrode materials for supercapacitors, as well as the importance of electrolytes in the development of supercapacitor technology. The basic principles of supercapacitors, the characteristics and performances of various nanostructured carbon-based electrode materials are discussed. Aqueous and non-aqueous electrolyte solutions used in supercapacitors are compared. The trend on future development of high-power and high-energy supercapacitors is analyzed.
6,057 citations
"Nanomaterial-Based Biosensors for F..." refers methods in this paper
...CNTs have been extensively used for Li-ion secondary batteries [14, 15], nanofiltration [16, 17], hydrogen storage in fuel cells [18, 19], and supercapacitors [20, 21]....
[...]
TL;DR: Graphene dispersions with concentrations up to approximately 0.01 mg ml(-1), produced by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone are demonstrated.
Abstract: Fully exploiting the properties of graphene will require a method for the mass production of this remarkable material. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to approximately 0.01 mg ml(-1), produced by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. This is possible because the energy required to exfoliate graphene is balanced by the solvent-graphene interaction for solvents whose surface energies match that of graphene. We confirm the presence of individual graphene sheets by Raman spectroscopy, transmission electron microscopy and electron diffraction. Our method results in a monolayer yield of approximately 1 wt%, which could potentially be improved to 7-12 wt% with further processing. The absence of defects or oxides is confirmed by X-ray photoelectron, infrared and Raman spectroscopies. We are able to produce semi-transparent conducting films and conducting composites. Solution processing of graphene opens up a range of potential large-area applications, from device and sensor fabrication to liquid-phase chemistry.
5,600 citations