Nickel–Cobalt Layered Double Hydroxide Nanosheets for High-performance Supercapacitor Electrode Materials
TL;DR: In this article, a facile and novel one-step method of growing nickel-cobalt layered double hydroxide (Ni-Co LDH) hybrid films with ultrathin nanosheets and porous nanostructures on nickel foam is presented using cetyltrimethylammonium bromide as nanostructure growth assisting agent but without any adscititious alkali sources and oxidants.
Abstract: A facile and novel one-step method of growing nickel-cobalt layered double hydroxide (Ni-Co LDH) hybrid films with ultrathin nanosheets and porous nanostructures on nickel foam is presented using cetyltrimethylammonium bromide as nanostructure growth assisting agent but without any adscititious alkali sources and oxidants. As pseudocapacitors, the as-obtained Ni-Co LDH hybrid film-based electrodes display a significantly enhanced specific capacitance (2682 F g−1 at 3 A g−1, based on active materials) and energy density (77.3 Wh kg−1 at 623 W kg−1), compared to most previously reported electrodes based on nickel-cobalt oxides/hydroxides. Moreover, the asymmetric supercapacitor, with the Ni-Co LDH hybrid film as the positive electrode material and porous freeze-dried reduced graphene oxide (RGO) as the negative electrode material, exhibits an ultrahigh energy density (188 Wh kg−1) at an average power density of 1499 W kg−1 based on the mass of active material, which greatly exceeds the energy densities of most previously reported nickel or cobalt oxide/hydroxide-based asymmetric supercapacitors.
Citations
More filters
01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.
2,437 citations
TL;DR: This review looks at the essential energy-storage mechanisms and performance evaluation criteria for asymmetric supercapacitors to understand the wide-ranging research conducted in this area and highlights several key scientific challenges.
Abstract: Ongoing technological advances in diverse fields including portable electronics, transportation, and green energy are often hindered by the insufficient capability of energy-storage devices By taking advantage of two different electrode materials, asymmetric supercapacitors can extend their operating voltage window beyond the thermodynamic decomposition voltage of electrolytes while enabling a solution to the energy storage limitations of symmetric supercapacitors This review provides comprehensive knowledge to this field We first look at the essential energy-storage mechanisms and performance evaluation criteria for asymmetric supercapacitors to understand the wide-ranging research conducted in this area Then we move to the recent progress made for the design and fabrication of electrode materials and the overall structure of asymmetric supercapacitors in different categories We also highlight several key scientific challenges and present our perspectives on enhancing the electrochemical performance of future asymmetric supercapacitors
2,030 citations
TL;DR: In this paper, a concise description of technologies and working principles of different materials utilized for supercapacitors has been provided, where the main focus has been on materials like carbon-based nanomaterials, metal oxides, conducting polymers and their nanocomposites along with some novel materials like metal-organic frameworks, MXenes, metal nitrides, covalent organic frameworks and black phosphorus.
Abstract: Supercapacitors have gained a lot of attention due to their unique features like high power, long cycle life and environment-friendly nature. They act as a link for energy-power difference between a traditional capacitor (having high power) and fuel cells/batteries (having high energy storage). In this perspective, a worldwide research has been reported to address this and rapid progress has been achieved in the advancement of fundamental as well as the applied aspects of supercapacitors. Here, a concise description of technologies and working principles of different materials utilized for supercapacitors has been provided. The main focus has been on materials like carbon-based nanomaterials, metal oxides, conducting polymers and their nanocomposites along with some novel materials like metal-organic frameworks, MXenes, metal nitrides, covalent organic frameworks and black phosphorus. The performance of nanocomposites has been analysed by parameters like energy, capacitance, power, cyclic performance and rate capability. Some of the latest supercapacitors such as electrochromic supercapacitor, battery-supercapacitor hybrid device, electrochemical flow capacitor, alternating current line filtering capacitor, micro-supercapacitor, photo-supercapacitor, thermally chargeable supercapacitor, self-healing supercapacitor, piezoelectric and shape memory supercapacitor have also been discussed. This review covers the up-to-date progress achieved in novel materials for supercapacitor electrodes. The latest fabricated symmetric/asymmetric supercapacitors have also been reported.
1,030 citations
TL;DR: The development of highly conductive NiCo2S4 single crystalline nanotube arrays grown on a flexible carbon fiber paper (CFP), which can serve not only as a good pseudocapacitive material but also as a three-dimensional conductive scaffold for loading additional electroactive materials.
Abstract: We report on the development of highly conductive NiCo2S4 single crystalline nanotube arrays grown on a flexible carbon fiber paper (CFP), which can serve not only as a good pseudocapacitive material but also as a three-dimensional (3D) conductive scaffold for loading additional electroactive materials. The resulting pseudocapacitive electrode is found to be superior to that based on the sibling NiCo2O4 nanorod arrays, which are currently used in supercapacitor research due to the much higher electrical conductivity of NiCo2S4. A series of electroactive metal oxide materials, including CoxNi1–x(OH)2, MnO2, and FeOOH, were deposited on the NiCo2S4 nanotube arrays by facile electrodeposition and their pseudocapacitive properties were explored. Remarkably, the as-formed CoxNi1–x(OH)2/NiCo2S4 nanotube array electrodes showed the highest discharge areal capacitance (2.86 F cm–2 at 4 mA cm–2), good rate capability (still 2.41 F cm–2 at 20 mA cm–2), and excellent cycling stability (∼4% loss after the repetitive ...
1,008 citations
TL;DR: In this article, the rational design and fabrication of NiCo2S4 nanosheets supported on nitrogen-doped carbon foams (NCF) is presented as a novel flexible electrode for supercapacitors.
Abstract: To push the energy density limit of supercapacitors, a new class of electrode materials with favorable architectures is strongly needed. Binary metal sulfides hold great promise as an electrode material for high-performance energy storage devices because they offer higher electrochemical activity and higher capacity than mono-metal sulfides. Here, the rational design and fabrication of NiCo2S4 nanosheets supported on nitrogen-doped carbon foams (NCF) is presented as a novel flexible electrode for supercapacitors. A facile two-step method is developed for growth of NiCo2S4 nanosheets on NCF with robust adhesion, involving the growth of Ni-Co precursor and subsequent conversion into NiCo2S4 nanosheets through sulfidation process. Benefiting from the compositional features and 3D electrode architectures, the NiCo2S4/NCF electrode exhibits greatly improved electrochemical performance with ultrahigh capacitance (877 F g−1 at 20 A g−1) and excellent cycling stability. Moreover, a binder-free asymmetric supercapacitor device is also fabricated by using NiCo2S4/NCF as the positive electrode and ordered mesoporous carbon (OMC)/NCF as the negative electrode; this demonstrates high energy density (≈45.5 Wh kg−1 at 512 W kg−1).
714 citations
References
More filters
TL;DR: This work has shown that combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries.
Abstract: Electrochemical capacitors, also called supercapacitors, store energy using either ion adsorption (electrochemical double layer capacitors) or fast surface redox reactions (pseudo-capacitors). They can complement or replace batteries in electrical energy storage and harvesting applications, when high power delivery or uptake is needed. A notable improvement in performance has been achieved through recent advances in understanding charge storage mechanisms and the development of advanced nanostructured materials. The discovery that ion desolvation occurs in pores smaller than the solvated ions has led to higher capacitance for electrochemical double layer capacitors using carbon electrodes with subnanometre pores, and opened the door to designing high-energy density devices using a variety of electrolytes. Combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries. The use of carbon nanotubes has further advanced micro-electrochemical capacitors, enabling flexible and adaptable devices to be made. Mathematical modelling and simulation will be the key to success in designing tomorrow's high-energy and high-power devices.
14,213 citations
TL;DR: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties are equally important.
Abstract: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties * To whom correspondence should be addressed. Phone, 404-8940292; fax, 404-894-0294; e-mail, mostafa.el-sayed@ chemistry.gatech.edu. † Case Western Reserve UniversitysMillis 2258. ‡ Phone, 216-368-5918; fax, 216-368-3006; e-mail, burda@case.edu. § Georgia Institute of Technology. 1025 Chem. Rev. 2005, 105, 1025−1102
6,852 citations
TL;DR: Batteries, fuel cells and supercapacitors belong to the same family of energy conversion devices and are needed to service the wide energy requirements of various devices and systems.
Abstract: Electrochemical energy conversion devices are pervasive in our daily lives. Batteries, fuel cells and supercapacitors belong to the same family of energy conversion devices. They are all based on the fundamentals of electrochemical thermodynamics and kinetics. All three are needed to service the wide energy requirements of various devices and systems. Neither batteries, fuel cells nor electrochemical capacitors, by themselves, can serve all applications.
6,230 citations
5,346 citations
TL;DR: Delamination of LDHs is an interesting route for producing positively charged thin platelets with a thickness of a few atomic layers, which can be used as nanocomposites for polymers or as building units for making new designed organic- inorganic or inorganic-inorganic nanomaterials.
Abstract: Layered double hydroxides (LDHs) are a class of ionic lamellar compounds made up of positively charged brucite-like layers with an interlayer region containing charge compensating anions and solvation molecules. Delamination of LDHs is an interesting route for producing positively charged thin platelets with a thickness of a few atomic layers, which can be used as nanocomposites for polymers or as building units for making new designed organic-inorganic or inorganic-inorganic nanomaterials. The synthesis of nanosized LDH platelets can be generally classified into two approaches, bottom-up and top-down. It requires modification of the LDH interlamellar environment and then selection of an appropriate solvent system. In DDS intercalated LDHs, the aliphatic tails of the DDS- anions exhibit a high degree of interdigitation in order to maximize guest-guest dispersive interactions. Bellezza reported that the LDH colloids can also been obtained by employing a reverse microemulsion approach.
2,616 citations