Journal ArticleDOI
Optimization of Three Wheeler Chassis by Linear Static Analysis
Reads0
Chats0
TLDR
In this paper, a cold-rolled steel IS513 having yield strength of 250 MPa was used for the structure of a three-wheeled car chassis to achieve weight and cost reduction by performing stress analysis.About:
This article is published in Materials Today: Proceedings.The article was published on 2017-01-01. It has received 10 citations till now. The article focuses on the topics: Chassis.read more
Citations
More filters
Journal ArticleDOI
Inertial relief technique based analysis of the three-wheeler E-vehicle chassis
TL;DR: Inertia relief methodology is adopted to analyse the unconstrained chassis of the three-wheeled “electric” vehicle using FEM in the ANSYS® 15.0 workbench tool.
Journal ArticleDOI
Design and analysis of 3-wheeler chassis
TL;DR: This analytical study attempts to design and develop a three-wheeled chassis for use in real-time conditions and finds its application mainly in the case of differently-abled people for easier hand throttling and braking.
Journal ArticleDOI
Lightweight Design of an Electric Tricycle Frame Considering Dynamic Stress in Driving Conditions
TL;DR: In this article, a flexible multibody dynamics approach is used to assess the dynamic stress of a tricycle frame in five driving conditions to determine the positions where material can be removed.
Journal ArticleDOI
Failure analysis of premature failed rear axle shaft of a three wheeler vehicle
TL;DR: In this article, the rear axle shaft of a three wheeler was analyzed to investigate the cause of failure of the axle shaft, the fracture was found at spline under wheel hub section and the presence of corrosion was traced at the fractured surface.
Journal ArticleDOI
Inertial relief technique based analysis of the three-wheeler E-vehicle chassis
TL;DR: In this paper , the authors used inertia relief methodology to analyze the unconstrained chassis of the three-wheeled electric vehicle using FEM in the ANSYS® 15.0 workbench tool.
References
More filters
Book
Thin Plates And Shells: Theory Analysis And Applications
TL;DR: In this paper, the authors introduce the theory of thin plates and thin shells, and apply it to the analysis of shell structures, including the moment theory of circular cylindrical shells.
Journal ArticleDOI
Stress analysis of a truck chassis with riveted joints
Ciçek Karaoglu,N. Sefa Kuralay +1 more
TL;DR: In this article, a stress analysis of a truck chassis with riveted joints was performed by using FEM and the commercial finite element package ANSYS version 5.3 was used for the solution of the problem.
Journal ArticleDOI
Stress Analysis of a Low Loader Chassis
Mohd Azizi Muhammad Nor,Helmi Rashid,Wan Mohd Faizul Wan Mahyuddin,Mohd Azuan Mohd Azlan,Jamaluddin Mahmud +4 more
TL;DR: In this paper, a 3D model of low loader based on design from Sumai Engineering Sdn. Bhd is created by using CATIA and the maximum deflection and stress are determined by performing stress analysis.
Journal ArticleDOI
Guidelines for the implementation of the CWELD and ACM2 spot weld models in structural dynamics
TL;DR: In this article, the techniques of model updating in structural dynamics are used to analyse and improve CWELD and ACM2 models, and guidelines are given for their optimum implementation, and it is shown that the natural frequencies of the benchmark structures are very sensitive to some parameters characterising these models.
Journal ArticleDOI
Structural Analysis of an Articulated Urban Bus Chassis via FEM: a Methodology Applied to a Case Study
TL;DR: In this article, the static structural analysis of an articulated urban bus chassis, carried out with the Finite Elements Method, is presented, in terms of stress, strain and displacement, under several loading and constraining conditions.