Journal ArticleDOI
Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances
Reads0
Chats0
TLDR
The recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed andp-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed.Abstract:
Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.read more
Citations
More filters
Journal ArticleDOI
Role of dopants as a carrier suppressor and strong oxygen binder in amorphous indium-oxide-based field effect transistor
S. Parthiban,Jang Yeon Kwon +1 more
TL;DR: In this paper, the authors discuss the recent developments of high performance and improved-stability of indium-oxide-based transparent amorphous-oxide semiconductor (TAOS) thin-film transistors (TFTs) properties.
Journal ArticleDOI
Progress in pulsed laser deposited two-dimensional layered materials for device applications
Zhibin Yang,Jianhua Hao +1 more
TL;DR: In this article, the performance of electronic or optoelectronic devices based on various kinds of 2D layers and ultrathin films grown using pulsed laser deposition is presented.
Journal ArticleDOI
Design and exploration of semiconductors from first principles: A review of recent advances
Journal ArticleDOI
Large-Scale Precise Printing of Ultrathin Sol–Gel Oxide Dielectrics for Directly Patterned Solution-Processed Metal Oxide Transistor Arrays
TL;DR: Large-area printed indium gallium zinc oxide (IGZO) thin-film transistor arrays, which exhibit mobilities >5 cm(2) V (-1) s(-1) and gate leakage current of 10(-9) A cm(-2) at a very low operation voltage of 2 V, are demonstrated by continuous simple bar-coated processes.
Journal ArticleDOI
p-Type Transparent Conducting Oxide/n-Type Semiconductor Heterojunctions for Efficient and Stable Solar Water Oxidation
Le Chen,Le Chen,Jinhui Yang,Jinhui Yang,Shannon Klaus,Shannon Klaus,Lyman J. Lee,Lyman J. Lee,Rachel Woods-Robinson,Rachel Woods-Robinson,Jie Ma,Jie Ma,Yanwei Lum,Yanwei Lum,Jason K. Cooper,Jason K. Cooper,Francesca M. Toma,Francesca M. Toma,Lin-Wang Wang,Lin-Wang Wang,Ian D. Sharp,Ian D. Sharp,Alexis T. Bell,Alexis T. Bell,Joel W. Ager,Joel W. Ager +25 more
TL;DR: The generality of the p-TCO protection approach is demonstrated by multihour, stable, water oxidation with n-InP/p-NiCo2O4 heterojunction photoanodes.
References
More filters
Journal ArticleDOI
Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors
TL;DR: A novel semiconducting material is proposed—namely, a transparent amorphous oxide semiconductor from the In-Ga-Zn-O system (a-IGZO)—for the active channel in transparent thin-film transistors (TTFTs), which are fabricated on polyethylene terephthalate sheets and exhibit saturation mobilities and device characteristics are stable during repetitive bending of the TTFT sheet.
Book
Semiconductor Material and Device Characterization
TL;DR: In this article, the authors present a characterization of the resistivity of a two-point-versus-four-point probe in terms of the number of contacts and the amount of contacts in the probe.
Journal ArticleDOI
High-κ gate dielectrics: Current status and materials properties considerations
TL;DR: In this paper, a review of the literature in the area of alternate gate dielectrics is given, based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success.
Journal ArticleDOI
Organic Thin Film Transistors for Large Area Electronics
TL;DR: In this article, the authors present new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of organic thin-film transistors (OTFTs) and discuss progress in the growing field of n-type OTFTs.
Journal ArticleDOI
Polymer‐Fullerene Bulk‐Heterojunction Solar Cells
Christoph J. Brabec,Srinivas (Jimmy) Gowrisanker,Jonathan Halls,Darin W. Laird,Shijun Jia,Shawn P. Williams +5 more
TL;DR: An outlook is presented on what will be required to drive this young photovoltaic technology towards the next major milestone, a 10% power conversion efficiency, considered by many to represent the efficiency at which OPV can be adopted in wide-spread applications.