scispace - formally typeset
Journal ArticleDOI

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

Elvira Fortunato, +2 more
- 12 Jun 2012 - 
- Vol. 24, Iss: 22, pp 2945-2986
Reads0
Chats0
TLDR
The recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed andp-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed.
Abstract
Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

read more

Citations
More filters
Journal ArticleDOI

Fabrication of P-type transparent conducting CuxZn1-xS films on glass substrates with high conductivity and optical transparency

TL;DR: In this paper, conductive and transparent p-type CuxZn1-xS films were successfully grown on glass substrate by pulsed laser deposition (PLD) method following by in situ annealing treatment.
Journal ArticleDOI

Influence of Surface Energy and Roughness on Hole Mobility in Solution-Processed Hybrid Organic Thin Film Transistors

TL;DR: This work investigates the influence of the surface energy and roughness on the hole mobility in organic thin-film transistors where a poly(3,3”’-dialkylquarterthiophene) hybridized with an octyltrichlorosilane self-assembled monolayer is employed as the semiconducting layer on a silicon nitride gate insulator.
Journal ArticleDOI

ZnO/graphene heterostructure nanohybrids for optoelectronics and sensors

TL;DR: In this article, the authors discuss the recent progress made in ZnO/graphene heterostructure nanohybrids through understanding and engineering the interface to realize high performance.
Journal ArticleDOI

Impact of improvements in ZnO thin film solution process on ZnO/Cu2O solar cell performance

TL;DR: In this paper, the semiconductor properties of ZnO thin films prepared by a spin coating method using the improved solution process compared to the previous study were investigated, and the p-Cu2O thin film electrodeposition was achieved by a low-cost two-electrode cell utilizing a simple DC power supply and microammeter.
Journal ArticleDOI

Al2O3-Induced Sub-Gap Doping on the IGZO Channel for the Detection of Infrared Light

TL;DR: In this article, a wide band gap oxide material with additional infrared (IR) photosensing has been reported, where the IR-associated sub-band gap absorption has not been reported.
References
More filters
Journal ArticleDOI

Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors

TL;DR: A novel semiconducting material is proposed—namely, a transparent amorphous oxide semiconductor from the In-Ga-Zn-O system (a-IGZO)—for the active channel in transparent thin-film transistors (TTFTs), which are fabricated on polyethylene terephthalate sheets and exhibit saturation mobilities and device characteristics are stable during repetitive bending of the TTFT sheet.
Book

Semiconductor Material and Device Characterization

TL;DR: In this article, the authors present a characterization of the resistivity of a two-point-versus-four-point probe in terms of the number of contacts and the amount of contacts in the probe.
Journal ArticleDOI

High-κ gate dielectrics: Current status and materials properties considerations

TL;DR: In this paper, a review of the literature in the area of alternate gate dielectrics is given, based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success.
Journal ArticleDOI

Organic Thin Film Transistors for Large Area Electronics

TL;DR: In this article, the authors present new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of organic thin-film transistors (OTFTs) and discuss progress in the growing field of n-type OTFTs.
Journal ArticleDOI

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

TL;DR: An outlook is presented on what will be required to drive this young photovoltaic technology towards the next major milestone, a 10% power conversion efficiency, considered by many to represent the efficiency at which OPV can be adopted in wide-spread applications.
Related Papers (5)