scispace - formally typeset
Journal ArticleDOI

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

Elvira Fortunato, +2 more
- 12 Jun 2012 - 
- Vol. 24, Iss: 22, pp 2945-2986
Reads0
Chats0
TLDR
The recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed andp-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed.
Abstract
Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

read more

Citations
More filters
Journal ArticleDOI

Carbon nanotube/silicon heterojunctions for photovoltaic applications

TL;DR: In this article, the effects of the structure of the CNTs, the interface layer and the silicon structure on the performance of CNT/Si photovoltaic devices are analyzed.
Journal ArticleDOI

P-type Cu(2)O/SnO bilayer thin film transistors processed at low temperatures.

TL;DR: P-type Cu2O/SnO bilayer thin film transistors with tunable performance were fabricated using room temperature sputtered copper and tin oxides and the bilayer transistor exhibited p-type behavior with field-effect mobility, on-to-off current ratio, and threshold voltage.
Journal ArticleDOI

Electrolyte-Gated WO3 Transistors: Electrochemistry, Structure, and Device Performance

TL;DR: In this article, a combination of cyclic voltammetry, X-ray diffraction, and transistor performance characterizations, complemented by spectroscopic (Raman and infrared) investigations, correlate the metal oxidation state and the charge transport properties of the metal oxide, shedding light on the doping process in electrically biased WO3 nanostru...
Journal ArticleDOI

Cation Size Effects on the Electronic and Structural Properties of Solution-Processed In–X–O Thin Films

TL;DR: In this article, the authors investigated the effects of varying both the X cation ionic radius (0.89-1.17 A) and the fi lm processing temperature (250-300 °C) on charge transport and local structure in amorphous indium oxide-based thin fi lms fabricated by spincoating.
Journal ArticleDOI

Sub-second photo-annealing of solution-processed metal oxide thin-film transistors via irradiation of intensely pulsed white light

TL;DR: In this paper, the photo-annealing of a solution-processed metal oxide active layer in thin film transistors by using intensely pulsed white light (IPWL) irradiation was demonstrated.
References
More filters
Journal ArticleDOI

Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors

TL;DR: A novel semiconducting material is proposed—namely, a transparent amorphous oxide semiconductor from the In-Ga-Zn-O system (a-IGZO)—for the active channel in transparent thin-film transistors (TTFTs), which are fabricated on polyethylene terephthalate sheets and exhibit saturation mobilities and device characteristics are stable during repetitive bending of the TTFT sheet.
Book

Semiconductor Material and Device Characterization

TL;DR: In this article, the authors present a characterization of the resistivity of a two-point-versus-four-point probe in terms of the number of contacts and the amount of contacts in the probe.
Journal ArticleDOI

High-κ gate dielectrics: Current status and materials properties considerations

TL;DR: In this paper, a review of the literature in the area of alternate gate dielectrics is given, based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success.
Journal ArticleDOI

Organic Thin Film Transistors for Large Area Electronics

TL;DR: In this article, the authors present new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of organic thin-film transistors (OTFTs) and discuss progress in the growing field of n-type OTFTs.
Journal ArticleDOI

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

TL;DR: An outlook is presented on what will be required to drive this young photovoltaic technology towards the next major milestone, a 10% power conversion efficiency, considered by many to represent the efficiency at which OPV can be adopted in wide-spread applications.
Related Papers (5)