scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

12 Jun 2012-Advanced Materials (WILEY‐VCH Verlag)-Vol. 24, Iss: 22, pp 2945-2986
TL;DR: The recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed andp-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed.
Abstract: Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.
Citations
More filters
Journal ArticleDOI
TL;DR: The role of defects and impurities on the transport and optical properties of bulk, epitaxial, and nanostructures material, the difficulty in p-type doping, and the development of processing techniques like etching, contact formation, dielectrics for gate formation, and passivation are discussed in this article.
Abstract: Gallium oxide (Ga2O3) is emerging as a viable candidate for certain classes of power electronics, solar blind UV photodetectors, solar cells, and sensors with capabilities beyond existing technologies due to its large bandgap. It is usually reported that there are five different polymorphs of Ga2O3, namely, the monoclinic (β-Ga2O3), rhombohedral (α), defective spinel (γ), cubic (δ), or orthorhombic (e) structures. Of these, the β-polymorph is the stable form under normal conditions and has been the most widely studied and utilized. Since melt growth techniques can be used to grow bulk crystals of β-GaO3, the cost of producing larger area, uniform substrates is potentially lower compared to the vapor growth techniques used to manufacture bulk crystals of GaN and SiC. The performance of technologically important high voltage rectifiers and enhancement-mode Metal-Oxide Field Effect Transistors benefit from the larger critical electric field of β-Ga2O3 relative to either SiC or GaN. However, the absence of clear demonstrations of p-type doping in Ga2O3, which may be a fundamental issue resulting from the band structure, makes it very difficult to simultaneously achieve low turn-on voltages and ultra-high breakdown. The purpose of this review is to summarize recent advances in the growth, processing, and device performance of the most widely studied polymorph, β-Ga2O3. The role of defects and impurities on the transport and optical properties of bulk, epitaxial, and nanostructures material, the difficulty in p-type doping, and the development of processing techniques like etching, contact formation, dielectrics for gate formation, and passivation are discussed. Areas where continued development is needed to fully exploit the properties of Ga2O3 are identified.

1,535 citations

Journal ArticleDOI
TL;DR: This Review surveys the uniqueness and universality of MOs versus other unconventional electronic materials in terms of materials chemistry and physics, electronic characteristics, thin-film fabrication strategies and selected applications in thin- film transistors, solar cells, diodes and memories.
Abstract: Optical transparency, tunable conducting properties and easy processability make metal oxides key materials for advanced optoelectronic devices. This Review discusses recent advances in the synthesis of these materials and their use in applications. Metal oxides (MOs) are the most abundant materials in the Earth's crust and are ingredients in traditional ceramics. MO semiconductors are strikingly different from conventional inorganic semiconductors such as silicon and III–V compounds with respect to materials design concepts, electronic structure, charge transport mechanisms, defect states, thin-film processing and optoelectronic properties, thereby enabling both conventional and completely new functions. Recently, remarkable advances in MO semiconductors for electronics have been achieved, including the discovery and characterization of new transparent conducting oxides, realization of p-type along with traditional n-type MO semiconductors for transistors, p–n junctions and complementary circuits, formulations for printing MO electronics and, most importantly, commercialization of amorphous oxide semiconductors for flat panel displays. This Review surveys the uniqueness and universality of MOs versus other unconventional electronic materials in terms of materials chemistry and physics, electronic characteristics, thin-film fabrication strategies and selected applications in thin-film transistors, solar cells, diodes and memories.

1,098 citations

Journal ArticleDOI
TL;DR: This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions.
Abstract: Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol–gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual...

841 citations

Journal ArticleDOI
TL;DR: In this review, recent progress in materials and devices for future wearable sensor technologies for bio and medical applications are reported.
Abstract: Printable electronics present a new era of wearable electronic technologies. Detailed technologies consisting of novel ink semiconductor materials, flexible substrates, and unique processing methods can be integrated to create flexible sensors. To detect various stimuli of the human body, as well as specific environments, unique electronic devices formed by "ink-based semiconductors" onto flexible and/or stretchable substrates have become a major research trend in recent years. Materials such as inorganic, organic, and hybrid semiconductors with various structures (i.e., 1D, 2D and 3D) with printing capabilities have been considered for bio and medical applications. In this review, we report recent progress in materials and devices for future wearable sensor technologies.

589 citations

Journal ArticleDOI
TL;DR: In this article, the recent progress in n-and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p type, and the major milestones already achieved with this emerging and very promising technology are summarized.
Abstract: Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

529 citations

References
More filters
Journal ArticleDOI
TL;DR: In this article, the properties of sputtered multicomponent amorphous dielectrics based on mixtures of high-κ and high-bandgap materials and their integration in oxide TFTs, with processing temperatures not exceeding 150°C, were discussed.
Abstract: — This paper discusses the properties of sputtered multicomponent amorphous dielectrics based on mixtures of high-κ and high-bandgap materials and their integration in oxide TFTs, with processing temperatures not exceeding 150°C. Even if Ta2O5 films are already amorphous, multicomponent materials such as Ta2O5—SiO2 and Ta2O5—Al2O3 allow an increase in the bandgap and the smoothness of the films, reducing their leakage current and improving (in the case of Ta2O5—SiO2) the dielectric/semiconductor interface properties when these dielectrics are integrated in TFTs. For HfO2- based dielectrics, the advantages of multicomponent materials are even clearer: while HfO2 films present a polycrystalline structure and a rough surface, HfO2—SiO2 films exhibit an amorphous structure and a very smooth surface. The integration of the multicomponent dielectrics in GIZO TFTs allows remarkable performance, comparable with that of GIZO TFTs using SiO2 deposited at 400°C by PECVD. For instance, with Ta2O5—SiO2 as the dielectric layer, field-effect mobility of 35 cm2/(V-sec), close to 0 V turn-on voltage, an on/off ratio higher than 106, a subthreshold slope of 0.24 V/dec, and a small/recoverable threshold voltage shifts under constant current (ID= 10 μA) stress during 24 hours are achieved. Initial results with multilayers of SiO2/HfO2—SiO2/SiO2 are also shown, allowing a lower leakage current with lower thickness and excellent device performance.

53 citations

Journal ArticleDOI
TL;DR: Amorphous indium-gallium-zinc oxide (a-IGZO) films were deposited by dc magnetron sputtering with H 2 O introduction and how the partial pressure during the deposition affects the electrical properties of the films was investigated in detail as mentioned in this paper.

53 citations

Journal ArticleDOI
TL;DR: In this article, the authors investigated the current conduction mechanism in radio frequency sputtered amorphous indium gallium zinc oxide (a-IGZO) films and found that the I-V characteristics fit well within the framework of space charge-limited current, whereas the conduction is enhanced by the Frenkel effect at high field (> 0.1 MV/cm).
Abstract: The current conduction mechanism in radio frequency sputtered amorphous indium gallium zinc oxide (a-IGZO) films was investigated using model devices designed to mimic the carrier injection from an electrode to an a-IGZO channel in thin-film transistors. Interface-limited mechanisms, such as thermionic emission and Fowler-Nordheim tunneling, clearly fail to fit the current-voltage (I-V) curves. Instead, the I-V characteristics of the a-IGZO devices fit well within the framework of space-charge-limited current, whereas the conduction is enhanced by the Frenkel effect at high field (>0.1 MV/cm).

52 citations

Journal ArticleDOI
TL;DR: In this article, a molybdenum/titanium (Mo/Ti) source-drain electrode was deposited on an a-IGZO layer, and the TiO, passivation layer was formed by oxidizing the Ti layer using oxygen plasma after etching the Mo layer.
Abstract: Titanium oxide (TiO x ) passivation layer was employed and optimized to stabilize the performance of the bottom gate amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs). A molybdenum/titanium (Mo/Ti) source-drain electrode was deposited on an a-IGZO layer, and the TiO, passivation layer was formed by oxidizing the Ti layer using oxygen plasma after etching the Mo layer. By increasing the oxygen plasma treatment time, the subthreshold slope and leakage current of the a-IGZO TFTs were improved to 0.78 V decade -1 and 0.3 pA, respectively, and the degradation of the TFT performance was not observed, even after thermal treatment at 280°C for 1 h.

51 citations

Journal ArticleDOI
TL;DR: In this paper, a-IGZO thin-film transistors without conventional source/drain (S/D) layer deposition were introduced, which exhibited a field effect mobility of 7.14 cm2 V-1 s-1, an on/off ratio of 795 ×106, a threshold voltage of 0.94 V, and a sub-threshold swing of 1.06 V/decade.
Abstract: In this paper, new structured amorphous InGaZnO (a-IGZO) thin-film transistors (TFTs) without conventional source/drain (S/D) layer deposition were introduced. The S/D layers were formed in a-IGZO channel layer by hydrogen (H2) plasma treatments. As the increased plasma treatment time, the resistivity of plasma treated a-IGZO as S/D decreased drastically from 104 to 4.8 ×10-3 Ω cm due to the carrier generation by plasma treatment for 240 s. The carrier concentration mechanism of the H2 plasma treated sample could be attributed to the preferential sputtering of oxygen by H2 bombardment due to formation of an oxygen vacancy and removal of adsorbed O2. The new proposed TFTs exhibited a field-effect mobility of 7.14 cm2 V-1 s-1, an on/off ratio of 7.95 ×106, a threshold voltage of 0.94 V, and a subthreshold swing of 1.06 V/decade. These results demonstrated the possibility of low cost TFT process because S/D electrode deposition was unnecessary.

51 citations