Pharmaceutical Applications of Hot-Melt Extrusion: Part I
TL;DR: The pharmaceutical applications of hot-melt extrusion, including equipment, principles of operation, and process technology, are reviewed and the physicochemical properties of the resultant dosage forms are described.
Abstract: Interest in hot-melt extrusion techniques for pharmaceutical applications is growing rapidly with well over 100 papers published in the pharmaceutical scientific literature in the last 12 years. Hot-melt extrusion (HME) has been a widely applied technique in the plastics industry and has been demonstrated recently to be a viable method to prepare several types of dosage forms and drug delivery systems. Hot-melt extruded dosage forms are complex mixtures of active medicaments, functional excipients, and processing aids. HME also offers several advantages over traditional pharmaceutical processing techniques including the absence of solvents, few processing steps, continuous operation, and the possibility of the formation of solid dispersions and improved bioavailability. This article, Part I, reviews the pharmaceutical applications of hot-melt extrusion, including equipment, principles of operation, and process technology. The raw materials processed using this technique are also detailed and the physicochemical properties of the resultant dosage forms are described. Part II of this review will focus on various applications of HME in drug delivery such as granules, pellets, immediate and modified release tablets, transmucosal and transdermal systems, and implants.
Citations
More filters
TL;DR: This review channels to a holistic perspective of several equipment components, processing requirements, materials used in HME, and various drug delivery systems utilizing HME in recent years and gives a comprehensive treatise on several novel opportunities and innovations.
26 citations
TL;DR: The suitability of the implemented PAT tool to quantify the drug load in a typical range for pharmaceutical applications was revealed, and in combination with a measurement frequency of 1 Hz, the system is sufficient for real-time data acquisition.
Abstract: Hot-melt extrusion on co-rotating twin screw extruders is a focused technology for the production of pharmaceuticals in the context of Quality by Design. Since it is a continuous process, the potential for minimizing product quality fluctuation is enhanced. A typical application of hot-melt extrusion is the production of solid dispersions, where an active pharmaceutical ingredient (API) is distributed within a polymer matrix carrier. For this dosage form, the product quality is related amongst others to the drug content. This can be monitored on- or inline as critical quality attribute by a process analytical technology (PAT) in order to meet the specific requirements of Quality by Design. In this study, an inline UV/Vis spectrometer from ColVisTec was implemented in an early development twin screw extruder and the performance tested in accordance to the ICH Q2 guideline. Therefore, two API (carbamazepine and theophylline) and one polymer matrix (copovidone) were considered with the main focus on the quantification of the drug load. The obtained results revealed the suitability of the implemented PAT tool to quantify the drug load in a typical range for pharmaceutical applications. The effort for data evaluation was minimal due to univariate data analysis, and in combination with a measurement frequency of 1 Hz, the system is sufficient for real-time data acquisition.
26 citations
Patent•
15 Apr 2009
TL;DR: In this article, a poorly water soluble and weakly basic azole antifungal compound and a pH sensitive polymer, pharmaceutical compositions, comprising the solid molecularly dispersed composition of the invention and methods of treating and/or preventing a fungal infection in a patient in need thereof, were presented.
Abstract: The present invention provides a solid molecularly dispersed composition comprising a poorly water soluble and weakly basic azole antifungal compound and a pH sensitive polymer, pharmaceutical compositions, comprising the solid molecularly dispersed composition of the invention and methods of treating and/or preventing a fungal infection in a patient in need thereof comprising orally administering a pharmaceutical composition comprising a composition of the invention to a patient in need thereof. Preferably the antifungal, compound is posaconazole, and the pH sensitive polymer is HPMCAS.
26 citations
Patent•
08 Sep 2015TL;DR: In this paper, a 3D printing technology is used to produce solid dosage forms, such as pharmaceutical tablets, from a spool of printed filament, typically containing the active ingredient.
Abstract: The present invention utilises 3D printing technology, specifically fused filament fabrication (FFF) 3D printing, to produce solid dosage forms, such as pharmaceutical tablets. The production process utilises novel printing filaments, typically on a spool, which contain the active ingredient. Such active-containing filaments have proved to be extremely robust and the principles outlined in the present disclosure provide access to a variety of viable formulations directly from a 3D printer. This, for the first time, affords a viable means for the in situ (e.g. within a pharmacy) 3D printing of personalised medicines tailored to a patient's needs. The invention also relates to purpose-built software for operating the printing apparatus, as well as local, national and global systems for monitoring the real time operation of a plurality of printing apparatuses to enable facile detection of malfunctions, thereby making regulatory approval viable and facilitating regulatory compliance.
25 citations
TL;DR: Poly ( methylene oxide) amount, ethylcellulose amount and drug solubility had significant effect on the T90 values whereas poly (ethylene oxide" amount and ethyl cellulose amounts had significant impact on the n value.
Abstract: The present paper was focused on exploiting Plackett–Burman design to screen the effect of nine factors—poly (ethylene oxide) molecular weight (X1), poly (ethylene oxide) amount (X2), ethylcellulose amount (X4), drug solubility (X5), drug amount (X6), sodium chloride amount (X7), citric acid amount (X8), polyethylene glycol amount (X9), and glycerin amount (X11) on the release of drugs from the extended release extrudates, i.e., release rate and release mechanism. The experiments were carried out according to a nine-factor 12-run statistical model and subjected to an 8-h dissolution study in phosphate buffer pH 6.8. The significance of the model was indicated by the ANOVA and the residual analysis. Poly (ethylene oxide) amount, ethylcellulose amount and drug solubility had significant effect on the T90 values whereas poly (ethylene oxide) amount and ethylcellulose amount had significant effect on the n value.
25 citations
Cites background from "Pharmaceutical Applications of Hot-..."
...Most commonly, the hot melt extrudates are comprised of drug with one or more functional excipients (22)....
[...]
References
More filters
1,883 citations
Book•
01 Jan 1995
TL;DR: The authors provided the basic building blocks of polymer science and engineering by coverage of fundamental polymer chemistry and materials topics given in Chapters 1 through 7 and provided information on the exciting new materialsnow available and the emerging areas of technological growth that could motivate a new generation of scientists and engineers.
Abstract: From the Book:
PREFACE: At least dozens of good introductory textbooks on polymer science and engineering are now available. Why then has yet another book been written?
The decision was based on my belief that none of the available texts fully addresses the needs of students in chemical engineering. It is not that chemical engineers are a rare breed, but rather that they have special training in areas of thermodynamics and transport phenomena that is seldom challenged by texts designed primarily for students of chemistry or materials science. This has been a frustration of mine and of many of my students for the past 15 years during which I have taught an introductory course, Polymer Technology, to some 350 chemical engineering seniors. In response to this perceived need, I had written nine review articles that appeared in the SPE publication Plastics Engineering from 1982 to 1984. These served as hard copy for my students to supplement their classroom notes but fell short of a complete solution.
In writing this text, it was my objective to first provide the basic building blocks of polymer science and engineering by coverage of fundamental polymer chemistry and materials topics given in Chapters 1 through 7.
As a supplement to the traditional coverage of polymer thermodynamics, extensive discussion of phase equilibria, equation-of- state theories, and UNIFAC has been included in Chapter 3. Coverage of rheology, including the use of constitutive equations and the modeling of simple flow geometries, and the fundamentals of polymer processing operations are given in Chapter 11.
Finally, I wanted to provide information on the exciting new materialsnowavailable and the emerging areas of technological growth that could motivate a new generation of scientists and engineers. For this reason, engineering and specialty polymers are surveyed in Chapter 10 and important new applications for polymers in separations (membrane separations), electronics (conducting polymers), biotechnology (controlled drug release), and other specialized areas of engineering are given in Chapter 12. In all, this has been an ambitious undertaking and I hope that I have succeeded in at least some of these goals.
Although the intended audience for this text is advanced undergraduates and graduate students in chemical engineering, the coverage of polymer science fundamentals (Chapters 1 through 7) should be suitable for a semester course in a materials science or chemistry curriculum.
Chapters 8 through 10 intended as survey chapters of the principal categories of polymers commodity thermoplastics and fibers, network polymers (elastomers and thermosets), and engineering and specialty polymers may be included to supplement and reinforce the material presented in the chapters on fundamentals and should serve as a useful reference source for the practicing scientist or engineer in the plastics industry.
981 citations
TL;DR: A comparison of the carbonyl stretching region of γ indomethacin, known to form carboxylic acid dimers, with that of amorphous indometHacin indicated that the amorphously phase exists predominantly as dimers.
Abstract: Purpose. To study the molecular structure of indomethacin-PVP amorphous solid dispersions and identify any specific interactions between the components using vibrational spectroscopy.
904 citations
Book•
01 Jan 1988
TL;DR: In this article, the elastic properties of polymeric solids and their properties of rubber are discussed. But they focus on the structure of the molecule rather than the properties of the solids.
Abstract: Introduction. 1: Structure of the molecule. 2: Structure of polymeric solids. 3: The elastic properties of rubber. 4: Viscoelasticity. 5: Yield and fracture. 6: Reinforced polymers. 7: Forming. 8: Design. Further reading, Answers, Index
790 citations
TL;DR: Improved bioavailability was achieved again demonstrating the value of the technology as a drug delivery tool, with particular advantages over solvent processes like co-precipitation.
790 citations