scispace - formally typeset
Journal ArticleDOI

Phase Change Material (Pcm)-Based Solar Air Heating System For Residential Space Heating In Winter

Adeel Waqas, +1 more
- 11 Mar 2013 - 
- Vol. 10, Iss: 4, pp 402-426
Reads0
Chats0
TLDR
In this article, phase change material (PCM)-based solar air heating system is used to achieve comfort conditions in a living space during winter season. But the most sensitive parameters affecting the performance of storage unit are the melting point of storage material, mass of PCM, and airflow rate.
Abstract
This study presents the analysis of phase change material (PCM)-based solar air heating system to achieve comfort conditions in a living space during winter season. The technical feasibility of PCM-based solar air heating system has been demonstrated, thus reducing the risks due to indoor air pollution caused by the use of fossil fuel or biomass combustion devices. The most sensitive parameters affecting the performance of storage unit are the melting point of storage material, mass of PCM, and airflow rate. The simulation results considering various flow rates and melting temperature of PCM indicate that, when melting temperature of PCM is equal to the comfort temperature of all the winter months, the storage unit performance is maximized for all the months during winter season. A new parameter, heating capacity of the PCM, has been introduced to illustrate the performance of the PCM storage.

read more

Citations
More filters
Journal ArticleDOI

A review of performance of zero energy buildings and energy efficiency solutions

TL;DR: This paper summarizes the actual state-of-art of whole performance of ZEBs and the related technical solutions, analysing their increasing potential in energy consumption and outlining the critical elements in making the zero-energy target the new standard for the buildings.
Journal ArticleDOI

Solar façades: A review

TL;DR: In this paper, the authors reviewed the important contents of studies on solar facades that have been published after 2010 and classified them into two major types: opaque and semi-transparent facades.
Journal ArticleDOI

Opportunities and challenges of PCM-to-air heat exchangers (PAHXs) for building free cooling applications—A comprehensive review

TL;DR: In this paper, a comprehensive review of the utilization of PCM-to-Air Heat Exchangers (PAHXs) for building free cooling applications is discussed in detail, focusing on hot desert climate.
Journal ArticleDOI

Multi-objective optimisation of thermal energy storage using phase change materials for solar air systems

TL;DR: A multi-objective optimisation strategy for TES systems using PCMs for solar air systems was presented, in which two performance indicators of average heat transfer effectiveness and effective PCM charging time were used as the conflicting objectives.
Journal ArticleDOI

Thermodynamic analysis of directionally influenced phase change material embedded building walls

TL;DR: In this article, the thermal performance of two phase change materials (PCMs) when they are embedded in a concrete wall is evaluated in terms of reduced heat gain and temperature fluctuations inside the building due to different orientation of the PCM wall.
References
More filters
Book

Solar engineering of thermal processes

TL;DR: In this article, the authors present an active and passive building heating system for solar thermal power systems, where the active system is designed by f--chart and the passive one by Utilizability Methods.

Handbook of heat transfer

TL;DR: In this article, the analogy between heat and mass transfer is covered and applied in the analysis of heat transfer by conduction, convection and radiation, and the analysis is performed by using the handbook of numerical heat transfer.
Journal ArticleDOI

A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)

TL;DR: In this paper, the phase change problem has been formulated using pure conduction approach but the problem has moved to a different level of complexity with added convection in the melt being accounted for, which makes it difficult for comparison to be made to assess the suitability of PCMs to particular applications.
Journal ArticleDOI

Adaptive thermal comfort and sustainable thermal standards for buildings

TL;DR: The origin and development of the adaptive approach to thermal comfort is explained, and recommendations made as to the best comfort temperature, the range of comfortable environments and the maximum rate of change of indoor temperature.
Book

Heat and Mass Transfer: A Practical Approach

TL;DR: In this paper, the authors present an overview of the basic concepts in Heat Conduction Equation (HCE) and its application in the context of refrigeration and freezing of foods.
Related Papers (5)