scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Phd by thesis

01 Apr 1988-Nature (Nature Publishing Group)-Vol. 332, Iss: 6166, pp 676-676
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Content maybe subject to copyright    Report

Citations
More filters
ReportDOI
01 Nov 1990
TL;DR: This report will establish methods for performing a domain analysis and describe the products of the domain analysis process to illustrate the application of domain analysis to a representative class of software systems.
Abstract: : Successful Software reuse requires the systematic discovery and exploitation of commonality across related software systems. By examining related software systems and the underlying theory of the class of systems they represent, domain analysis can provide a generic description of the requirements of that class of systems and a set of approaches for their implementation. This report will establish methods for performing a domain analysis and describe the products of the domain analysis process. To illustrate the application of domain analysis to a representative class of software systems, this report will provide a domain analysis of window management system software.

4,420 citations

Journal ArticleDOI
TL;DR: The straw person model (SPM) as mentioned in this paper has been proposed to explain the orientation effects of active galactic nuclei (AGN) and quasars in the line of sight (LOS) images.
Abstract: Because the critical central regions of Active Galactic Nuclei (AGN) and quasars are strongly nonspherical but spatially unresolved, orientation effects have been the source of much confusion. In fact, it now appears that much of the variety in AGN types is just the result of varying orientation relative to the line of sight. We can define an extreme hypothesis,, the straw person model (SPM), in which there are two basic types of AGN: the radio quiets and the radio louds. For each type there is a range in intrinsic luminosity, and the luminosity controls some properties such as the Fanaroff and Riley classes. However, at a given intrinsic luminosity, all other properties such as spectroscopic classification and VLBI component speeds are ascribed to orientation. This model is only a caricature of the unification idea, and is already ruled out on many grounds, but it will be useful for organizing the discussion. I’ll describe what I consider to be convincing evidence that orientation effects are important and widespread. The true situation may be in some sense half way between the SPM and the hypothesis that orientation doesn’t affect classification at aIl. To us optimists, the orienration cup is half full rather than half empty. Although it is too soon to say for sure, the hypothesis that most objects’ classifications would be different if seen from other directions is a tenable one today.

4,005 citations


Cites methods from "Phd by thesis"

  • ...Kay (1990) and Tran et al (1992) have fo und more Seyfert 2s with broad permitted lines in the polarized fl ux, but the FC polarizations are generally much less than that of NGC 1068....

    [...]

Journal ArticleDOI
TL;DR: This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.
Abstract: Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.

3,452 citations


Cites background or methods from "Phd by thesis"

  • ...b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface.([181]) c) Tubes...

    [...]

  • ...a) Film prepared in a PP container under static conditions; dimensions: 25 25 cm(2), thickness: 200 mm.([181]) b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface....

    [...]

Journal ArticleDOI
TL;DR: The Arcade Learning Environment (ALE) as discussed by the authors is a platform for evaluating the development of general, domain-independent AI technology, which provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players.
Abstract: In this article we introduce the Arcade Learning Environment (ALE): both a challenge problem and a platform and methodology for evaluating the development of general, domain-independent AI technology. ALE provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players. ALE presents significant research challenges for reinforcement learning, model learning, model-based planning, imitation learning, transfer learning, and intrinsic motivation. Most importantly, it provides a rigorous testbed for evaluating and comparing approaches to these problems. We illustrate the promise of ALE by developing and benchmarking domain-independent agents designed using well-established AI techniques for both reinforcement learning and planning. In doing so, we also propose an evaluation methodology made possible by ALE, reporting empirical results on over 55 different games. All of the software, including the benchmark agents, is publicly available.

2,429 citations

Journal ArticleDOI
TL;DR: The solid electrolyte interphase (SEI) is a protecting layer formed on the negative electrode of Li-ion batteries as a result of electrolyte decomposition, mainly during the first cycle as discussed by the authors.

2,386 citations

References
More filters
01 Jan 1999
TL;DR: The blackboard approach to automatic transcription is outlined and a new system based on the log-lag correlogram of [Ellis 1996] is presented, outlining the bottom-up detection of octaves and transcription of simple polyphonic music.
Abstract: It is only very recently that systems have been developed that transcribe polyphonic music with more than two voices in even limited generality. Two of these systems [Kashino et al.1995, Martin 1996] have been built within a blackboard framework, integrating front ends based on sinusoidal analysis with musical knowledge. These and other systems to date rely on instrument models for detecting octaves. Recent results have shown that an autocorrelation-based front end may make bottom-up detection of octaves possible, thereby improving system performance as well as reducing the distance between transcription models and human audition. This report outlines the blackboard approach to automatic transcription and presents a new system based on the log-lag correlogram of [Ellis 1996]. Preliminary results are presented, outlining the bottom-up detection of octaves and transcription of simple polyphonic music.

79 citations

Journal ArticleDOI
TL;DR: In this paper, the string-inspired technique is used for the calculation of vacuum polarisation tensors in constant electromagnetic fields, and the two-point cases are calculated explicitly, leading to compact representations for the constant field vacuum polarization tensors for both scalar and spinor QED.

79 citations

Journal ArticleDOI
TL;DR: This work explored the potential of a structure-based drug discovery procedure to target the soluble monomeric form of the Aβ42 peptide, and utilised a set of structures selected from clusters of conformations within an ensemble generated by molecular dynamics simulations.
Abstract: The aggregation of intrinsically disordered peptides and proteins is associated with a wide range of highly debilitating neurological and systemic disorders. In this work we explored the potential of a structure-based drug discovery procedure to target one such system, the soluble monomeric form of the Aβ42 peptide. We utilised for this purpose a set of structures of the Aβ42 peptide selected from clusters of conformations within an ensemble generated by molecular dynamics simulations. Using these structures we carried out fragment mapping calculations to identify binding “hot spots” on the monomeric form of the Aβ42 peptide. This procedure provided a set of hot spots with ligand efficiencies comparable to those observed for structured proteins, and clustered into binding pockets. Such binding pockets exhibited a propensity to bind small molecules known to interact with the Aβ42 peptide. Taken together these results provide an initial indication that fragment-based drug discovery may represent a potential therapeutic strategy for diseases associated with the aggregation of intrinsically disordered proteins.

79 citations

Journal ArticleDOI
TL;DR: The adhesion mechanisms at soft polymer interfaces are analyzed with a special emphasis first on the role of connector molecules, that is, polymer chains bound to the interface and which transmit stress through a stretching and extraction mechanism, and second on the necessary relay taken by additional dissipation mechanisms acting at larger scales.
Abstract: Based on several significant examples, we analyse the adhesion mechanisms at soft polymer interfaces with a special emphasis first on the role of connector molecules, that is, polymer chains bound to the interface and which transmit stress through a stretching and extraction mechanism, and second on the necessary relay that must be taken by additional dissipation mechanisms acting at larger scales if one wants to reach typical fracture toughnesses in the range of a few 10 J m K2 . Examples of such bulk dissipation mechanisms will be discussed for interfaces between polymer melts and for pressure-sensitive adhesives in contact with a solid surface. We shall particularly point out the fact that the level of adhesion results from a competition between adhesive failure usually driven by both the interactions and the friction properties of the interface and bulk strong deformations which take place in the bulk of the adhesive layer. Controlling the friction properties of the interface then becomes a tool to finely tune adhesive properties.

79 citations

Journal ArticleDOI
TL;DR: In this article, four series of liquid crystal dimers have been prepared containing either ether-linked or methylene-linked spacers, and the entropy change associated with the nematic-isotropic transition is higher for an even-membered methylene−linked dimer than for the corresponding ether−linked material.
Abstract: Four series of liquid crystal dimers have been prepared containing either ether‐linked or methylene‐linked spacers. Changing the spacer from being ether‐linked, i.e. O(CH2) n O, to methylene‐linked, i.e. (CH2) n +2, results in decreased nematic–isotropic transition temperatures, and this reduction is more pronounced for odd‐membered spacers. By contrast, the entropy change associated with the nematic–isotropic transition is higher for an even‐membered methylene‐linked dimer than for the corresponding ether‐linked material. This trend is reversed for odd members. These observations are completely in accord with the predictions of a theoretical model developed by Luckhurst and co‐workers in which the only difference between the dimers is their shape. For the highly non‐linear pentamethylene‐linked dimers, only those with a short terminal chain exhibited fluid smectic behaviour, specifically, a monotropic alternating SmC structure which allowed for the efficient packing of the bent molecules. Once the termin...

79 citations