scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Phd by thesis

01 Apr 1988-Nature (Nature Publishing Group)-Vol. 332, Iss: 6166, pp 676-676
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Content maybe subject to copyright    Report

Citations
More filters
ReportDOI
01 Nov 1990
TL;DR: This report will establish methods for performing a domain analysis and describe the products of the domain analysis process to illustrate the application of domain analysis to a representative class of software systems.
Abstract: : Successful Software reuse requires the systematic discovery and exploitation of commonality across related software systems. By examining related software systems and the underlying theory of the class of systems they represent, domain analysis can provide a generic description of the requirements of that class of systems and a set of approaches for their implementation. This report will establish methods for performing a domain analysis and describe the products of the domain analysis process. To illustrate the application of domain analysis to a representative class of software systems, this report will provide a domain analysis of window management system software.

4,420 citations

Journal ArticleDOI
TL;DR: The straw person model (SPM) as mentioned in this paper has been proposed to explain the orientation effects of active galactic nuclei (AGN) and quasars in the line of sight (LOS) images.
Abstract: Because the critical central regions of Active Galactic Nuclei (AGN) and quasars are strongly nonspherical but spatially unresolved, orientation effects have been the source of much confusion. In fact, it now appears that much of the variety in AGN types is just the result of varying orientation relative to the line of sight. We can define an extreme hypothesis,, the straw person model (SPM), in which there are two basic types of AGN: the radio quiets and the radio louds. For each type there is a range in intrinsic luminosity, and the luminosity controls some properties such as the Fanaroff and Riley classes. However, at a given intrinsic luminosity, all other properties such as spectroscopic classification and VLBI component speeds are ascribed to orientation. This model is only a caricature of the unification idea, and is already ruled out on many grounds, but it will be useful for organizing the discussion. I’ll describe what I consider to be convincing evidence that orientation effects are important and widespread. The true situation may be in some sense half way between the SPM and the hypothesis that orientation doesn’t affect classification at aIl. To us optimists, the orienration cup is half full rather than half empty. Although it is too soon to say for sure, the hypothesis that most objects’ classifications would be different if seen from other directions is a tenable one today.

4,005 citations


Cites methods from "Phd by thesis"

  • ...Kay (1990) and Tran et al (1992) have fo und more Seyfert 2s with broad permitted lines in the polarized fl ux, but the FC polarizations are generally much less than that of NGC 1068....

    [...]

Journal ArticleDOI
TL;DR: This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.
Abstract: Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.

3,452 citations


Cites background or methods from "Phd by thesis"

  • ...b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface.([181]) c) Tubes...

    [...]

  • ...a) Film prepared in a PP container under static conditions; dimensions: 25 25 cm(2), thickness: 200 mm.([181]) b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface....

    [...]

Journal ArticleDOI
TL;DR: The Arcade Learning Environment (ALE) as discussed by the authors is a platform for evaluating the development of general, domain-independent AI technology, which provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players.
Abstract: In this article we introduce the Arcade Learning Environment (ALE): both a challenge problem and a platform and methodology for evaluating the development of general, domain-independent AI technology. ALE provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players. ALE presents significant research challenges for reinforcement learning, model learning, model-based planning, imitation learning, transfer learning, and intrinsic motivation. Most importantly, it provides a rigorous testbed for evaluating and comparing approaches to these problems. We illustrate the promise of ALE by developing and benchmarking domain-independent agents designed using well-established AI techniques for both reinforcement learning and planning. In doing so, we also propose an evaluation methodology made possible by ALE, reporting empirical results on over 55 different games. All of the software, including the benchmark agents, is publicly available.

2,429 citations

Journal ArticleDOI
TL;DR: The solid electrolyte interphase (SEI) is a protecting layer formed on the negative electrode of Li-ion batteries as a result of electrolyte decomposition, mainly during the first cycle as discussed by the authors.

2,386 citations

References
More filters
Journal ArticleDOI
TL;DR: Without assuming a time discretization, a reduced-basis procedure is presented to ‘efficiently’ compute accurate approximations to the solution of the parabolic problem and ‘relevant’ outputs of interest and an error estimation procedure is developed to 'a posteriori validate’ the accuracy of the output predictions.
Abstract: In this paper, we extend reduced-basis output bound methods developed earlier for elliptic problems, to problems described by ‘parameterized parabolic’ partial differential equations. The essential new ingredient and the novelty of this paper consist in the presence of time in the formulation and solution of the problem. First, without assuming a time discretization, a reduced-basis procedure is presented to ‘efficiently’ compute accurate approximations to the solution of the parabolic problem and ‘relevant’ outputs of interest. In addition, we develop an error estimation procedure to ‘a posteriori validate’ the accuracy of our output predictions. Second, using the discontinuous Galerkin method for the temporal discretization, the reduced-basis method and the output bound procedure are analysed for the semi-discrete case. In both cases the reduced-basis is constructed by taking ‘snapshots’ of the solution both in time and in the parameters: in that sense the method is close to Proper Orthogonal Decomposition (POD).

79 citations

Journal ArticleDOI
TL;DR: In this paper, the ντ magnetic moment was measured based on a search for an anomalous increase in the number of neutrino-electron interactions, which was observed when 2.3 were expected from background processes.

79 citations

Journal ArticleDOI
TL;DR: In this article, the 6% Al magnesium alloy AM60 in various zirconium or titanium fluoride aqueous acid solutions was used to investigate the behavior of the 6%, and the morphology and composition of the resulting film were determined by Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray spectroscopy (EDX).
Abstract: Electrochemical rest potential and cyclic voltametry were used to investigate the behaviour of the 6% Al magnesium alloy AM60 in various zirconium or titanium fluoride aqueous acid solutions. These solutions have a wide range of aggressiveness with respect to AM60 due largely to fluoride concentration and in some cases to their highly acidic nature. The morphology and composition of the resulting film have been determined by Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray spectroscopy (EDX). The film nucleation is promoted by a pH increase due to water reduction and is thus more likely to occur on the cathodic parts of the surface. Correlatively, film formation on the anodic primary solid solution occurred in only one solution.

78 citations

Journal ArticleDOI
TL;DR: In this paper, two high temperature CVD techniques, respectively optimised for epitaxial and crystal growth, are presented, and a chimney reactor has been developed for fast epitaxy, carried out at 1700°C, with growth rates ranging from 10 to 25 m mh 1, and a material quality close to conventional CVD processes.
Abstract: Two high temperature CVD techniques, respectively optimised for epitaxial and crystal growth, are presented. A chimney reactor has been developed for fast epitaxy, carried out at 1700‐1900°C, with growth rates ranging from 10 to 25 m mh 1 , and a material quality close to conventional CVD processes. The growth of 4H-SiC epilayers with low n-type doping (10 14 ‐10 15 cm 3 ) and carrier lifetimes up to 0.4 ms is described, while the feasibility of high voltage Schottky rectifiers (1.8 kV) is demonstrated. On the other side, developments of the stagnant flow HTCVD process, where growth is carried out at 2000‐2300°C, are shown to enable growth rates ranging from 0.3 up to 0.8 mm h 1 . The main characteristics of HTCVD grown SiC crystals (up to nearly 7 mm thick) are described. © 1999 Elsevier Science S.A. All rights reserved.

78 citations

Journal ArticleDOI
TL;DR: In this paper, the optical properties of dendrimer-metal nanocomposites as well as functionalized DMMN composites are described. But the focus of this review is to describe the properties of DMMNs.
Abstract: The use of novel nanostructured materials for optical applications continues to be an important issue for the creation of new devices. New materials including metal nanoparticles have played an important role for applications in photonics, biology, as well as medicine. This review primarily concerns the use of one particular metal nanoparticle topology, dendrimer–metal nanocomposites. The focus of this review is to describe the optical properties of dendrimer–metal nanocomposites as well as functionalized dendrimer–metal nanocomposites. The description of various synthetic methodologies to produce transition metal (Au, Ag, Pd, Pt, and Cu) dendrimer nanocomposites as well as lanthanide ion-cored dendrimers are presented in this review, with further details regarding the basic characterization of these systems. The experimental procedures of the optical measurements used to probe the steady-state and time-resolved dynamics in these novel nanoparticle architectures are provided. Analysis of optical propertie...

78 citations