scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Phd by thesis

01 Apr 1988-Nature (Nature Publishing Group)-Vol. 332, Iss: 6166, pp 676-676
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Content maybe subject to copyright    Report

Citations
More filters
ReportDOI
01 Nov 1990
TL;DR: This report will establish methods for performing a domain analysis and describe the products of the domain analysis process to illustrate the application of domain analysis to a representative class of software systems.
Abstract: : Successful Software reuse requires the systematic discovery and exploitation of commonality across related software systems. By examining related software systems and the underlying theory of the class of systems they represent, domain analysis can provide a generic description of the requirements of that class of systems and a set of approaches for their implementation. This report will establish methods for performing a domain analysis and describe the products of the domain analysis process. To illustrate the application of domain analysis to a representative class of software systems, this report will provide a domain analysis of window management system software.

4,420 citations

Journal ArticleDOI
TL;DR: The straw person model (SPM) as mentioned in this paper has been proposed to explain the orientation effects of active galactic nuclei (AGN) and quasars in the line of sight (LOS) images.
Abstract: Because the critical central regions of Active Galactic Nuclei (AGN) and quasars are strongly nonspherical but spatially unresolved, orientation effects have been the source of much confusion. In fact, it now appears that much of the variety in AGN types is just the result of varying orientation relative to the line of sight. We can define an extreme hypothesis,, the straw person model (SPM), in which there are two basic types of AGN: the radio quiets and the radio louds. For each type there is a range in intrinsic luminosity, and the luminosity controls some properties such as the Fanaroff and Riley classes. However, at a given intrinsic luminosity, all other properties such as spectroscopic classification and VLBI component speeds are ascribed to orientation. This model is only a caricature of the unification idea, and is already ruled out on many grounds, but it will be useful for organizing the discussion. I’ll describe what I consider to be convincing evidence that orientation effects are important and widespread. The true situation may be in some sense half way between the SPM and the hypothesis that orientation doesn’t affect classification at aIl. To us optimists, the orienration cup is half full rather than half empty. Although it is too soon to say for sure, the hypothesis that most objects’ classifications would be different if seen from other directions is a tenable one today.

4,005 citations


Cites methods from "Phd by thesis"

  • ...Kay (1990) and Tran et al (1992) have fo und more Seyfert 2s with broad permitted lines in the polarized fl ux, but the FC polarizations are generally much less than that of NGC 1068....

    [...]

Journal ArticleDOI
TL;DR: This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.
Abstract: Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.

3,452 citations


Cites background or methods from "Phd by thesis"

  • ...b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface.([181]) c) Tubes...

    [...]

  • ...a) Film prepared in a PP container under static conditions; dimensions: 25 25 cm(2), thickness: 200 mm.([181]) b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface....

    [...]

Journal ArticleDOI
TL;DR: The Arcade Learning Environment (ALE) as discussed by the authors is a platform for evaluating the development of general, domain-independent AI technology, which provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players.
Abstract: In this article we introduce the Arcade Learning Environment (ALE): both a challenge problem and a platform and methodology for evaluating the development of general, domain-independent AI technology. ALE provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players. ALE presents significant research challenges for reinforcement learning, model learning, model-based planning, imitation learning, transfer learning, and intrinsic motivation. Most importantly, it provides a rigorous testbed for evaluating and comparing approaches to these problems. We illustrate the promise of ALE by developing and benchmarking domain-independent agents designed using well-established AI techniques for both reinforcement learning and planning. In doing so, we also propose an evaluation methodology made possible by ALE, reporting empirical results on over 55 different games. All of the software, including the benchmark agents, is publicly available.

2,429 citations

Journal ArticleDOI
TL;DR: The solid electrolyte interphase (SEI) is a protecting layer formed on the negative electrode of Li-ion batteries as a result of electrolyte decomposition, mainly during the first cycle as discussed by the authors.

2,386 citations

References
More filters
Proceedings ArticleDOI
Paul Hudak1
02 Jun 1998
TL;DR: A methodology is described for building domain specific embedded languages (DSELs), in which a DSL is designed within an existing, higher-order and typed, programming language such as Haskell or ML, which facilitates reuse of syntax semantics, implementation code, software tools, and look-and-feel.
Abstract: A domain specific language (DSL) allows one to develop software for a particular application domain quickly and effectively, yielding programs that are easy to understand, reason about, and maintain. On the other hand, there may be a significant overhead in creating the infrastructure needed to support a DSL. To solve this problem, a methodology is described for building domain specific embedded languages (DSELs), in which a DSL is designed within an existing, higher-order and typed, programming language such as Haskell or ML. In addition, techniques are described for building modular interpreters and tools for DSELs. The resulting methodology facilitates reuse of syntax semantics, implementation code, software tools, as well as look-and-feel.

400 citations

Journal ArticleDOI
TL;DR: The observation of dynamo action in the von Kármán sodium experiment, i.e., the generation of a magnetic field by a strongly turbulent swirling flow of liquid sodium, is reported.
Abstract: We report the observation of dynamo action in the von Karman sodium experiment, i.e., the generation of a magnetic field by a strongly turbulent swirling flow of liquid sodium. Both mean and fluctuating parts of the field are studied. The dynamo threshold corresponds to a magnetic Reynolds number R-m similar to 30. A mean magnetic field of the order of 40 G is observed 30\% above threshold at the flow lateral boundary. The rms fluctuations are larger than the corresponding mean value for two of the components. The scaling of the mean square magnetic field is compared to a prediction previously made for high Reynolds number flows.

395 citations

Journal ArticleDOI
Betty Abelev1, Jaroslav Adam2, Dagmar Adamová3, Andrew Marshall Adare4  +997 moreInstitutions (89)
18 Jan 2013
TL;DR: In this article, the authors measured the centrality of inelastic Pb-Pb collisions at a center-of-mass energy of 2.76 TeV per colliding nucleon pair with ALICE.
Abstract: This publication describes the methods used to measure the centrality of inelastic Pb-Pb collisions at a center-of-mass energy of 2.76 TeV per colliding nucleon pair with ALICE. The centrality is a key parameter in the study of the properties of QCD matter at extreme temperature and energy density, because it is directly related to the initial overlap region of the colliding nuclei. Geometrical properties of the collision, such as the number of participating nucleons and the number of binary nucleon-nucleon collisions, are deduced from a Glauber model with a sharp impact parameter selection and shown to be consistent with those extracted from the data. The centrality determination provides a tool to compare ALICE measurements with those of other experiments and with theoretical calculations.

388 citations

Journal ArticleDOI
TL;DR: A review of recent theoretical and simulation work on dynamical heterogeneity and correlated particle motion in glass-forming liquids and polymers is presented in this article, where the authors show evidence for increasing mobility fluctuations in these systems with decreasing temperature.
Abstract: In this paper, review of recent theoretical and simulation work on dynamical heterogeneity and correlated particle motion in glass-forming liquids and polymers is presented. Evidence for increasing mobility fluctuations in these systems with decreasing temperature, and the relationship between dynamical heterogeneity and decoupling of diffusion and structural relaxation is described. The relationship between dynamical heterogeneity, string-like collective motion, the clustering of strings, and mode-coupling theory is briefly discussed.

384 citations

Journal ArticleDOI
TL;DR: A survey on electrochemical codeposition of inert particles in a metallic matrix is given in this article, where many experimental factors were found to influence the codepposition process, which led to some understanding of the mechanism.
Abstract: A survey on electrochemical codeposition of inert particles in a metallic matrix is given. Particles held in suspension in an electroplating bath are codeposited with the metal during electrodeposition. The particles used are inert to the bath and can be of different types, that is, pure metals, ceramics or organic materials. Combining this variety of types of particles with the different electrodeposited metals, electrochemical codeposition enables the production of a large range of composite materials with unique properties. Many experimental factors were found to influence the codeposition process, which led to some understanding of the mechanism. Models to predict the codeposition rate were developed, but were only partly successful.

380 citations